User's Manual

CHAPTER 4. MMC Programming OfficeServ 500 Wireless LAN Service Manual/Ed.00
Page 4-10 © SAMSUNG Electronics Co., Ltd.
Program Procedure Display Screen
1) Press the [TRSF] button, and enter 846.
2) Press the [SPK] key to enter the select menu.
When the cursor is at the phone number,
press the [UP & DOWN] button and
select the current phonenumber information.
Press the Soft key and move to the information
menu of each information menu, and select the
setting menu.
3) Confirm the status of terminal register for each
phone number.
4) Register the PASSWORD of terminal.
5) Register the USER ID of terminal.
6) Displays the MAC ADDRESS
of the registered terminal.
7) Displays the IP ADDRESS
of the registered terminal.
8) Displays the IP OFFSET
of the registered terminal.
9) Displays the WBS NUMBER
of the registered terminal.
10) Displays the WLI NUMBER
of the registered terminal.
11) Displays the PHONE TYPE
of the registered terminal.
12) Displays the location of the registered terminal.
8 4 6 : WI P I NFO
SEL ECT PROG I D
[ 8 6 0 1 ] REGI ETERED
NO
[ 8 6 0 1 ] REGI ETERED
NO
[ 8 6 0 1 ] PASSWORD
0 0 0 0
[ 8 6 0 1 ] MAC ADDR
[ 8 6 0 1 ] USER I D
1 2 1 2
[ 8 6 0 1 ] I P ADDRESS
[ 8 6 0 1 ] I P OFFSET
[ 8 6 0 1 ] WBS NUMBER
[ 8 6 0 1 ] WL I NUMBER
[ 8 6 0 1 ] PHONE TYPE
[ 8 6 0 1 ] L OCATED
NO