User's Manual

CHAPTER 4. MMC Programming OfficeServ 500 Wireless LAN Service Manual/Ed.00
Page 4-8 © SAMSUNG Electronics Co., Ltd.
6) Set the items below at the menu .
 Register the RETRANS T1.
The initial re-transmission time if no answer based
on the RFC2543 specification.
The range is 0~9900ms. Default is 500 ms.
 Register the RETRANS T2.
The maximum re-transmission time
if no answer based on the RFC2543 specification.
The range is 0~9900ms. Default is 4000ms.
 Register the RETRANS T4.
The time the User Agent Server waits
after receiving the ACK message.
Based on the RFC2543 specification.
The range is 0~9900ms. Default is 5000 ms.
 Register the GEN LINGER T.
The server shall retransmit the response
during this amount of time
until the requested retransmission is received.
For example, the wait time after sending 200 OK
for INFO. The range is 0~99900ms. Default is 5000 ms.
 Register the INV LINGER T.
After the client sends ACK
for the INVITE Final Response,
the client cannot confirm
if the server received the ACK message.
The client waits for this amount of time
after sending ACK for the Final Response.
The range is 0~99900ms. Default is 5000 ms
 Register the STOP GENNR T.
Before sending Cancel for General Request,
the User Agent shall wait for this amount of time.
The range is 0~99900ms. Default is 5000 ms.
SI P : I NV L I NGER T
3 2 0 0 0 MS
SI P : STOP GENNR T
0 0 0 5 0 0MS
SI P : GEN L I NGER T
0 0 0 0 0 0MS
SI P : RETRANS T4
0 0 4 0 0 0MS
SI P : RETRANS T1
0 0 0 5 0 0MS
SI P : RETRANS T2
0 0 4 0 0 0MS