User's Manual
Table Of Contents
- Purpose
- Document Content and Organization
- Conventions
- Reference
- Revision History
- Symbols
- Caution
- Overview
- 1 Overview of Wireless LAN
- 2 Overview of OfficeServ 500 Wireless LAN
- 3 Components of OfficeServ 500 Wireless LAN
- 4 Specification of OfficeServ 500 Wireless LAN
- Hardware of OfficeServ 500
- Installation
- MMC Programming
- Maintenance
- WLAN (802.11b/DSSS) Specifications
- Antenna Beam Pattern of WBS24
CHAPTER 4
© SAMSUNG Electronics Co., Ltd. Page 4-1
MMC Programming
This chapter describes the MMC programming procedures related to the wireless
LAN function.
Method of MMC programming
Only the MMC programming procedures related to the wireless LAN are introduced in
this chapter. Refer to the ‘OfficeServ 500 Programming Description’ for the overall
system MMC programming procedures.
1 Before Programming
This section introduces the basic concepts, the phone buttons used for programming,
and the cautions before starting the programming procedure.
1.1 Programming Overview
The OfficeServ 500 System settings can be easily modified using a connected digital
phone, and the program used to change the system settings through a phone is called
the MMC(Man Machine Communication). The program used for system setting
through a connected laptop computer or a PC is called the PCMMC. The MMC
programs are classified into a program that the subscriber can program and a program
that the subscriber cannot program, depending on the three subscriber levels :
Engineer, Operator, and Subscriber. The Engineer and Operator programming
requires a password for each programming, but the Subscriber programming does not
need a password.