User's Manual
Table Of Contents
- Purpose
- Document Content and Organization
- Conventions
- Reference
- Revision History
- Symbols
- Caution
- Overview
- 1 Overview of Wireless LAN
- 2 Overview of OfficeServ 500 Wireless LAN
- 3 Components of OfficeServ 500 Wireless LAN
- 4 Specification of OfficeServ 500 Wireless LAN
- Hardware of OfficeServ 500
- Installation
- MMC Programming
- Maintenance
- WLAN (802.11b/DSSS) Specifications
- Antenna Beam Pattern of WBS24
CHAPTER 3
© SAMSUNG Electronics Co., Ltd. Page 3-1
Installation
This chapter describes the installation procedure for the wireless LAN device. This
chapter describes procedures for mounting the 8WLI card to the OfficeServ 500
system, mounting the WBS24, setting the system DB for the wireless LAN service,
registering the WIP mobile phone, and positioning the WBS24.
1 Installation Procedure
Installation and configuration procedures for the wireless LAN equipment of
OfficeServ 500 System are as follows.
Figure 3.1 The Wireless LAN Installation Procedure
Mount the 8WLI card on the OfficeServ 500 S
y
stem.
Install the WBS24 within the wireless LAN service area.
Connect the 8WLI with the WBS24 using the RJ-45 cable.
Re
g
ister the WIP-5000M terminal.
Select the location where the WBS24 is to be installed
1
Set u
p
the s
y
stem DB for the wireless LAN.
2
3
4
5
6