User's Manual
Table Of Contents
- Purpose
- Document Content and Organization
- Conventions
- Reference
- Revision History
- Symbols
- Caution
- Overview
- 1 Overview of Wireless LAN
- 2 Overview of OfficeServ 500 Wireless LAN
- 3 Components of OfficeServ 500 Wireless LAN
- 4 Specification of OfficeServ 500 Wireless LAN
- Hardware of OfficeServ 500
- Installation
- MMC Programming
- Maintenance
- WLAN (802.11b/DSSS) Specifications
- Antenna Beam Pattern of WBS24
CHAPTER 1.Overview OfficeServ 500 Wireless LAN Service Manual/Ed.00
Page 1-16
© SAMSUNG Electronics Co., Ltd.
3) The power density supplied to the feeder of sending antenna shall be less than
10mW when it is measured based on 1 MHz of resolution bandwidth.
4) The occupied frequency bandwidth shall be less than 26 MHz
Registration of Electromagnetic Compatibility (Domestic Specification)
The wireless equipment to be homologated(or registered) for electromagnetic
compatibility shall have the following requirements :
1) Input, output, save, search, transmit or control functions for data and
communication messages
2) Have one or more terminal port that operates as for information only
3) Have less than 600 volts of voltage supply
As for information equipment to be homologated, the registration of electromagnetic
compatibility will not be authorized separately, but it will be processed together with
the type registration. Therefore, a test transcript for electromagnetic compatibility
should be submitted when applying for homologation(for office appliances).