User's Manual

CHAPTER 5. Maintenance OfficeServ 500 Wireless LAN Service Manual/Ed.00
Page 5-24 © SAMSUNG Electronics Co., Ltd.
13) Select [2] menu to load the WLIROM..HEX file. Then the following message
will show up.
Selected 1> Single- WLI HEX FILE Loading
Please Start Loading !!
14) Perform No.6)~No.10) as shown above and upload the MWLIROM.HEX file.
Select the MWLIROM.HEX file instead of the WLIROM.HEX file. After
uploading the MWLIROM.HEX file, the following message will show up.
================HEX FILE INFORMATION ====================
HEX FILE START ADDR = 0x00110000
HEX FILE END ADDR = 0x0012465D
HEX FILE TOTAL LEN = 0x0002465D
------------ FLASH MEMORY WRITE START ---------------------
STEP 1. SECTOR ERASE SUCCESS
STEP 2. PROGRAM WRITE  SUCCESS
----------- FLASH MEMORY WRITE END ----------------------
Please [R] key to Restart or [L] key to Loading Again !!
The message can be different according to the WLI software version. If ‘Flash
Memory Write End’ shows up, it means that uploading is successfully
completed.
15) Click [R] and restart the 8WLI card. If the file is normally transmitted, the
following main window will show up.
******************************************
* VoWLAN Console < 8- Port WLI Board > *
******************************************