Specifications

UNLESS OTHER SPECIFIED TOLERANCES ON
X !
!!
! X.X !
!!
! X.XX
ANGLES !
!!
! HOLEDIA !
!!
!
"
""
"
INPAQ TECHNOLOGY CO., LTD.
ʳ
ʳʳ
ʳ
SCALE #
##
# ----- UNIT #
##
# mm
DRAWN BY: !"#
!"#!"#
!"#
CHECKED BY: $%&
$%&$%&
$%&
DESIGNED BY: !"#
!"#!"#
!"#
APPROVED BY: '()
'()'()
'()
THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF
INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR
USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF
APPARATUS OR DEVICES WITHOUT PERMISSION
DOCUMENT
SPEC REV.
TITLE #
##
# ACA-3216-A1-CC-S Specification
NO.
ENS000069320
A1
PAGE 7
OF 8
-
8. Environmental CharacteristicsǺ
ǺǺ
Ǻ
(1) Reliability Test
Item Condition Specification
Thermal shock
1. 30±3 minutes at -40°C±5°C,
2. Convert to +105°C (5 minutes)
3. 30±3 minutes at +105°C±5°C,
4. Convert to -40°C (5 minutes)
5. Total 100 continuous cycles
No apparent damage
Fulfill the electrical
spec. after test.
Humidity
resistance
1. Humidity: 85% R.H.
2. Temperature: 85±5°C
3. Time: 1000 hours.
No apparent damage
Fulfill the electrical
spec. after test.
High
temperature
resistance
1. Temperature: 150°C±5°C
2. Time: 1000 hours.
No apparent damage
Fulfill the electrical
spec. after test.
Low temperature
resistance
1. Temperature: -40°C±5°C
2. Time: 1000 hours.
No apparent damage
Fulfill the electrical
spec. after test.
Soldering heat
resistance
1. Solder bath temperature: 260±5°C
2. Bathing time: 10±1 seconds
No apparent damage
Solderability
The dipped surface of the terminal shall be at least
95% covered with solder after dipped in solder
bath of 245±5°C for 3±1 seconds.
No apparent damage
(2) Storage condition
(a) At warehouse
The temperature should be within 0 ~ 30°C and humidity should be less than 60% RH.
The product should be used within 1 year from the time of delivery.
(b) On board
The temperature should be within -40 ~ 85°C and humidity should be less than 85% RH.
(3) Operating temperature range
Operating temperature range: -40 ~ +105°C.