Owner’s Instructions SPP4251 1-800-SAMSUNG (1-800-726-7864) Samsung Electronics America Service Division 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 www.samsungusa.com Samsung Electronics Canada Inc. Samsung Customer Care 7037 Financial Drive Mississauga, Ontario L5N 6R3 www.samsung.
Important Safety Instructions Warning! Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Thank You for Choosing Samsung Thank you for choosing Samsung! Your new Samsung product represents the latest in television technology. We designed it with easy-to-use on-screen menus and closed captioning capabilities, making it one of the best products in its class. We are proud to offer you a product that will provide convenient, dependable service and enjoyment for years to come. Important Safety Information Always be careful when using your PDP.
FCC Information Important Warranty Information Regarding Television Format Viewing User Instructions Warning NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Contents General Information Channel Control Your New Plasma Display Panel ....................10 Fine Tuning Channels ..................................68 Remote Control Buttons ................................12 LNA (Low Noise Amplifier) ..........................69 Wall Installation Instructions ..........................14 Connecting a PC and Operation Connections Connecting to a PC ....................................72 Connecting VHF and UHF Antennas ..............
Your New Plasma Display Panel Front Panel Rear Panel Œ DVI INPUT Connect to the video output jack for device with DVI output. ´ MONITOR OUT (VIDEO / L-AUDIO-R) Outputs for external devices Speaker ˇ PC INPUT (RGB IN / AUDIO) Connect to the video and audio output jack on your PC. SOURCE button Press to display all of the available video sources (ie., Video, S-Video, Component1, Component2, PC ). MENU button Displays the main on-screen menu.
Remote Control Buttons ¸ SRS TSXT button Selects Trusurround XT mode. Remote Control Œ POWER button Turns the PDP on and off. ˛ MTS button Press to choose stereo, mono or Separate Audio Program (SAP broadcast). ◊ AUTO PROG. button The TV automatically cycles through all of the available channels and stores them in memory. ´ ASPECT button ± ADD/DEL button ˇ Number buttons ¨ +100 button ≠ DNIe button ˆ MUTE button — SET button Press to change the screen size. Press to select channels over 100.
Wall Installation Instructions Installation Notes Fixing the PDP panel to the wall attachment panel bracket 1 2 Do not install the PDP on any place other than vertical walls. 3 Use only recommended parts and components. 1 To protect the performance of the PDP and prevent troubles, avoid the followings: • Do not install next to smoke and fire detectors. • Do not install in an area subjected to vibration or high voltage. • Do not install near or around any heating apparatus.
4 Put the 4 pegs on the PDP in the grooves of the wall mount bracket and pull down on the PDP (Œ) to secure it to the wall mount bracket (´). Tighten the screws as shown (ˇ) so that the PDP cannot be separated from wall mount bracket. How to Adjust Mounting Angle Factory default PDP panel Wall Wall attachment panel bracket The wall mount bracket is delivered separately. Please tighten the captive screw in the direction of the arrow after assembling the bracket.
P L A S M A D I S P L A Y P A N E L Connections Connecting Connecting Connecting Connecting Connecting Connecting Connecting VHF and UHF Antennas ..............................................20 Cable TV....................................................................21 Speakers.................................................................. ..23 a VCR........................................................................24 a Camcorder ...............................................
Connecting VHF and UHF Antennas Connecting Cable TV You can connect different cable systems to your PDP, including cable without a cable box, and cable with a cable box that descrambles some or all channels. Antennas with 75-ohm Round Leads If your antenna looks like this: 1 Cable without a Cable Box it has 75-ohm round leads. 1 Plug the antenna lead into the VHF/UHF terminal on the PDP. Use the Antenna Cable, an accessory included in the product package.
Connecting a VCR Cable with a Cable Box that Descrambles Some (But Not All) Channels To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial cables (which you can buy from your Samsung dealer or any electronics store). 1 Connecting a VCR to the Video or S-Video/Audio jack PDP VCR Find and disconnect the cable that is connected to the ANTENNA IN terminal of your cable box. This terminal might be labeled "ANT IN", "VHF IN" or simply, "IN".
Connecting a Camcorder Connecting a DVD Player (480i, 480p) This PDP displays the optimum picture in 720p mode. Viewing camcorder tapes Playing DVD Camcorder PDP DVD Player PDP Power Plug Power Plug Video Cable Video Cable Audio Cable How to Connect Connect a Video/Audio cable between the AUDIO(L/R)/VIDEO jacks on the PDP and the VIDEO/AUDIO OUTPUT jacks on the camcorder. Viewing Tapes 1. Turn on your PDP.
Connecting a DTV Receiver (480p, 720p, 1080i) This PDP displays the optimum picture in 720p mode. Watching DTV PDP DTV Receiver Power Plug or Video Cable Audio Cable DVI Cable Use a DVI-D connection cable. (sold separately) P How to Connect 1 2 Connect the cable or antenna to the antenna input jack on the DTV. 3 Connect an Audio cable between the COMPONENT 1, 2 (L/R AUDIO) or DVI jacks on the PDP and the AUDIO OUTPUT jacks on the DTV.
Turning the PDP On and Off Turning the PDP On and Off Displaying Status Information Press the INFO button on the remote control. The PDP will display the Picture mode, Sound mode, MTS, Caption, and Clock. Press the POWER button on the remote control. The PDP will be turned on and you will be ready to use its features. You can also use the POWER ( )button on the front of the PDP.
