00516B SCD86/D87-SEA (01~27) 3/29/02 3:00 PM Page 100 ENGLISH THIS CAMCORDER IS MANUFACTURED BY: ELECTRONICS SAMSUNG Electronics America Inc. 105 Challenger Road, Ridgefield Park N.J 07660-0511 Tel: 1-800-SAMSUNG (1-800-726-7864) *Samsung Electronics’ Internet Home Page http://www.samsungusa.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:00 PM Page 101 ENGLISH Digital Video Camcorder SCD86/D87 AF CCD LCD Auto Focus Charge Coupled Device STA RT/ STO P Liquid Crystal Display Y DAT TIM E/ E SLO X2 V Owner’s Instruction Book US PATENT 4415844 DISPLA ZER MEM O ORY A.DUB W F.AD Before operating the unit, please read this instruction book thoroughly, and retain it for future reference.
ENGLISH Notices and Safety Instructions Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. To prevent electric shock, match wide blade of plug to wide slot and fully insert.
ENGLISH Notices and Safety Instructions 9. VENTILATION: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the CAMCORDER and to protect it from overheating. These openings must not be blocked or covered. Never place your CAMCORDER on a bed, sofa, rug, or other similar surface: on or near a radiator or heat register.
ENGLISH Notices and Safety Instructions 14. LIGHTNING: For added protection of this CAMCORDER during a lightning storm o when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the CAMCORDER due to lightning and power-line surges. 15.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:00 PM Page 2 ENGLISH Contents N otes and Safety Instructions .............................................................................................................................. 6 Getting to Know Your Camcorder ...................................................................................................................... 11 Features .....................................................................................................................
00516B SCD86/D87-SEA (01~27) 3/29/02 3:00 PM Page 3 ENGLISH Contents Adjusting the Focus .............................................................................................................................................................................................. 32 Playing back a tape you have recorded on the LCD ................................................................................................................................................
00516B SCD86/D87-SEA (01~27) 3/29/02 3:00 PM Page 4 ................................................................................................................. ENGLISH Contents To Stop Recording (use FADE IN / FADE OUT) ................................................................................................................................................. 64 Audio dubbing ......................................................................................................................
00516B SCD86/D87-SEA (01~27) 3/29/02 3:00 PM Page 5 ENGLISH Contents Structure of folders and files on the Memory Stick .............................................................................................................................................. 84 Image Format .......................................................................................................................................................................................................
00516B SCD86/D87-SEA (01~27) 3/29/02 3:01 PM Page 6 ENGLISH Notes and Safety Instructions N otes regarding the rotation of the LCD screen Please rotate the LCD screen carefully as illustrated. Over rotation may cause damage to the inside of the hinge that connects the LCD screen to the Camcorder. 1. LCD screen closed. 1 2. Standard recording using the LCD screen. 2 90 3. Recording when looking at the LCD screen from the top. 3 90 4. Recording when looking at the LCD screen from the front.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:01 PM Page 7 ENGLISH Notes and Safety Instructions N otices regarding CO PYRIGH T Television programs, video tapes, DVD titles, films, and other program materials may be copyrighted. Unauthorized copying of copyrighted material may be against the law. N otes regarding moisture condensation 1. A sudden rise in atmospheric temperature may cause condensation to form inside the camcorder.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:01 PM Page 8 ENGLISH Notes and Safety Instructions N otes regarding the battery pack - Make sure that the battery pack is fully charged before starting to record. - To preserve battery power, keep your camcorder turned off when you are not operating it.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:01 PM Page 9 ENGLISH Notes and Safety Instructions N ote regarding the LEN S - Do not film with the camera lens pointing directly at the sun. Direct sunlight can damage the CCD(Charge Coupled Device). N otes regarding electronic viewfinder 1. Do not position the camcorder such that the viewfinder is pointing towards the sun. Direct sunlight can damage the inside of the viewfinder.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:01 PM Page 10 ENGLISH Notes and Safety Instructions Precautions regarding the Lithium battery 1. The lithium battery maintains the clock function and user settings; even if the battery pack or AC adapter is removed. 2. The lithium battery for the camcorder lasts about 6 months under normal operation from time of installation. 3.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:01 PM Page 11 ENGLISH Getting to Know Your Camcorder Features • Digital data transfer function with IEEE1394 By incorporating the IEEE 1394 (i.LINK™ : i.LINK is a serial data transfer protocol and interconnectivity system, used to transmit DV data) high speed data transport port, both moving and still images can be transferred to a PC, making it possible to produce or edit various images.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:38 PM Page 12 ENGLISH Getting to Know Your Camcorder Accessories Supplied with camcorder Make sure that the following basic accessories are supplied with your digital video camera. 3. AC cord (AD39-00076A) 4. AUDIO/VIDEO cable (AD39-00001A) 5. Instruction Book (AD68-00516B) 6. Lithium batteries (2EA) (AD43-10130H) 7. S-VIDEO cable (AC39-42001Z) 8. Remote Control (AD59-00085A) 9. Shoulder strap (AD63-00202A) 10. USB cable (AD39-00073A) 11.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:01 PM Page 13 ENGLISH Getting to Know Your Camcorder Front & Left View 9. Viewfinder 1. Smart Shoe 8. TFT LCD monitor 2. Lens 7. EASY button 6. CUSTOM button 3. Internal MIC 4. IR light 5. Remote Sensor 1. Smart Shoe (SCD87 only) Accessory Shoe (SCD86 only) 2. Lens 3. Internal MIC 6. CUSTOM button (see page 61) 7. EASY button (see page 60) 8. TFT LCD monitor 9. Viewfinder (see page 32) 4. IR (Infrared) light 5.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:01 PM Page 14 ENGLISH Getting to Know Your Camcorder Left Side 1. Function buttons REV FWD S.SHOW REC SEARCH FADE DELETE BLC DISPLAY 7. Mode switch 2. Speaker 6. MENU dial 5. ENTER button 4. MENU button 3. DC jack 2. Speaker 1. Function buttons PLAYER M.PLAY CAMERA 3. DC jack : (REW) REC SEARCH – REV : (FF) REC SEARCH + FWD : (PLAY/STILL) FADE SLIDE SHOW : (STOP) BLC DELETE DISPLAY DISPLAY DISPLAY 14 4. MENU button 5. ENTER button 6.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:01 PM Page 15 ENGLISH Getting to Know Your Camcorder Right & Top View 1. Zoom lever 2. PHOTO button 10. NITE PIX switch 3. Power switch 9. External MIC in 8. Audio/Video jack 7. USB jack 6. S-VIDEO jack 4. START/STOP button 5. Hook for handstrap 1. Zoom lever 2. PHOTO button (see page 67) 3. Power switch (CAMERA or PLAYER) 4. START/STOP button 5. Hook for handstrap 6. S-VIDEO jack 7. USB jack 8. Audio/Video jack 9. External MIC in 10.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:01 PM Page 16 ENGLISH Getting to Know Your Camcorder Rear & Bottom View 8. Memory Stick slot 7. Battery Release CHARGE 1. Charging indicator 2. Hook for shoulder strap 3. Lithium battery cover 1. Charging indicator 2. Hook for shoulder strap 3. Lithium battery cover 4. Tripod receptacle 5. TAPE EJECT 6. Focus adjust knob 7. Battery Release 8. Memory Stick slot 16 6. Focus adjust konb 4. Tripod receptacle 5.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:01 PM Page 17 ENGLISH Getting to Know Your Camcorder Remote control 1. PHOTO 2. START/STOP 3. SELF TIMER 4. ZERO MEMORY 5. PHOTO SEARCH 13. A.DUB 6. (FF) 7. (REW) 8. (PLAY) START/ STOP 17. DISPLAY PHOTO SELF TIMER ZERO MEMORY PHOTO SEARCH A.DUB F.ADV DISPLAY 16. Zoom SLOW X2 15. X2 18. DATE/TIME 14. (SLOW) 12. (STILL) 11. (STOP) 9. F. ADV + 10. Direction 1. 2. 3. 4. 5. 6. 7. 8. 9.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:01 PM Page 18 ENGLISH Getting to Know Your Camcorder O SD (O n Screen D isplay in CAM ERA and PLAYER modes) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:01 PM Page 19 ENGLISH Getting to Know Your Camcorder O SD (O n Screen D isplay in M .REC/ M .PLAY modes) A. Folder number-file number (see page 84) B. Image counter - Current still image/Total number of recordable still images. C. CARD (memory) indicator D. Image recording and loading indicator E. Quality F. ERASE PROTECTION indicator (see page 92) G. Print Mark(see page 91) H. SLIDE SHOW O SD in M .REC mode E D C S.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:01 PM Page 20 ENGLISH Preparation H ow to use the Remote Control Battery Installation for the Remote Control ✤ You need to insert or replace the lithium battery when : - You purchase the camcorder. - The remote control doesn’t work. ✤ Ensure that you insert the lithium cell correctly, following the + and - markings. ✤ Be careful not to reverse the polarity of the battery.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:01 PM Page 21 ENGLISH Preparation Lithium Battery Installation ✤ The lithium battery maintains the clock function and preset contents of the memory; even if the battery pack or AC power adapter is removed. ✤ The lithium battery for the camcorder lasts about 6 months under normal operation from the time of installation. ✤ When the lithium battery becomes weak or dead, the date/time indicator flashes for about 5 seconds when you set the power switch to CAMERA.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:01 PM Page 22 ENGLISH Preparation Adjusting the H and Strap It is very important to ensure that the Hand strap has been correctly adjusted before you begin your recording. The hand strap enables you to : - Hold the camcorder in a stable, comfortable position. - Press the Zoom and START/STOP button without having to change the position of your hand. Hand strap a. Pull open the Hand Strap cover and release the Hand Strap. b.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:01 PM Page 23 ENGLISH Preparation Connecting a Power Source There are two types of power source that can be connected to your camcorder. - The AC Power Adapter and AC cord : used for indoor recording. - The Battery Pack : used for outdoor recording. To use the AC Power adapter and DC Cable 1. Connect the AC Power adapter to the AC cord. 4 Power Switch 2. Connect the AC cord to a wall socket.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:01 PM Page 24 ENGLISH Preparation U sing the Lithium Ion Battery Pack ✤ The amount of continuous recording time available depends on : - The type and capacity of the battery pack you are using. - How often the Zoom function is used. It is recommended that you have several batteries available. Charging the Lithium Ion Battery Pack 1. Attach the battery pack to the camcorder. 2. Connect the AC Power adapter to an AC cord and connect the AC cord to a wall socket. 3.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:01 PM Page 25 ENGLISH Preparation U sing the Lithium Ion Battery Pack Table of continuous recording time based on model and battery type. ✤ If you close the LCD screen, it switches off and the viewfinder switches on automatically. ✤ The continuous recording times given in the table above are approximations. Actual recording time depends on usage. Time Continuous recording time Charging time LCD ON EVF ON SB-L110 Approx. 2hr Approx. 1hr 30min Approx.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:01 PM Page 26 ENGLISH Preparation Battery level display • The battery level display indicates the amount of power remaining in the battery pack. a a. b. c. d. e. Fully charged 20~40% used 40~80% used 80~95% used Completely used (flickers) (The camcorder will turn off soon, change the battery as soon as possible) ✤ Please refer to the table on page 25 for approximate continuous recording times.
00516B SCD86/D87-SEA (01~27) 3/29/02 3:01 PM Page 27 ENGLISH Preparation Inserting and Ejecting a Cassette ✤ When inserting a tape or closing a cassette holder, do not apply excessive force. This may cause a malfunction. ✤ Do not use any tapes other than Mini DV cassettes. 1. Connect a power source and slide the TAPE EJECT switch and open the cassette door. 1 - The cassette holding mechanism rises automatically. 2.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 28 ENGLISH Basic Recording M aking your First Recording 1. Connect a Power source to the camcorder. (see page 23) (A battery pack or a AC power adapter) ■ Insert a cassette. (see page 27) 1 2 4 3 2. Remove the LENS CAP and hook it onto the hand strap. 3. Set the power switch to the CAMERA position. ■ Set the mode switch to TAPE position. ■ Open the LCD monitor and make sure that STBY is displayed.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 29 ENGLISH Basic Recording When a cassette is loaded and the camcorder is left in the STBY mode for more than 5 minutes without being used, it will switch off automatically. To use it again, push the START/STOP button or set the Power switch to OFF and then back to CAMERA. This Auto Power off feature is designed to save battery power. Record Search (REC SEARCH) ✤ You can view a recording using the REC SEARCH +, -- function in STBY mode.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 30 ENGLISH Basic Recording H ints for Stable Image Recording ■ ■ While recording, it is very important to hold the camcorder correctly. Fix the LENS cap firmly by clipping it to the hand strap. (refer to the figure) Recording with the LCD monitor 1. Hold the camcorder firmly using the hand strap. 2. Place your right elbow against your side. 3. Place your left hand under or beside the LCD to support and adjust it. Do not touch the built-in microphone.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 31 ENGLISH Basic Recording Adjusting the LCD ✤ Your camcorder is equipped with a 2.5 inch color Liquid Crystal Display(LCD) screen, which enables you to view what you are recording or playing back directly. ✤ Depending on the conditions under which you are using the camcorder (indoors or outdoors for example), you can adjust ; ■ BRIGHT SELECT ■ BRIGHT ADJUST ■ COLOR ADJUST 1. Set the POWER switch to CAMERA position.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 32 ENGLISH Basic Recording 8. Press the ENTER button again. ■ You may select NORMAL or SUPER in the BRIGHT SELECT feature and press the ENTER button to save the setting. ■ Use the MENU DIAL to adjust the value of BRIGHT ADJUST and COLOR ADJUST. ■ You can set values for BRIGHT ADJUST between 00 ~ 35 and COLOR ADJUST between 00 ~ 07. 9. Press the MENU button to finish the setting.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 33 ENGLISH Basic Recording Playing back a tape you have recorded on the LCD ✤ You can monitor the playback picture on the LCD monitor. ✤ Make sure that the battery pack is in place. 1. Hold down the power switch tab and turn it to the PLAYER position. 1 CAMERA OFF PLAYER 2. Insert the tape you wish to view. (see page 27) 2 3. Open the LCD screen. Adjust the angle of the LCD screen and set the brightness or color if necessary. 4.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 34 ENGLISH Basic Recording Adjusting the LCD during PLAY ✤ You can adjust the LCD during playback. ✤ The adjustment method is the same procedure as used in CAMERA mode. (see page 31) Controlling Sound from the Speaker The Speaker works in PLAYER mode only. 2 ■ When you use the LCD screen for playback, you can hear the recorded sound from the built-in Speaker. - Follow the instructions below to decrease or mute speaker volume in the PLAYER mode.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 35 ENGLISH Advanced Recording U se of various Functions ● Setting menu items MENU SUB MENU Available mode Memory REC. ✔ ✔ ✔ ✔ ✔ ✔ ✔ CAMERA PLAYER CLOCK SET REMOCON BEEP SOUND SHUTTER SOUND DEMONSTRATION CAMERA PROGRAM AE WHT. BALANCE D. ZOOM EIS DSE SELECT FLASH SELECT CUSTOM.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 36 ENGLISH Advanced Recording ● Availability of functions in each mode Operating Mode Requested Mode EIS EIS D.ZOOM D.ZOOM PHOTO Digital special effects O O O O O Digital functions O PHOTO ✕ ✕ Digital Special Effects O O ✕ O O : The requested mode will work in this operating mode. ✕ : You can not change the requested mode. Notes ■ ■ 36 When a menu item on the LCD is marked with an X , that item cannot be activated.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 37 ENGLISH Advanced Recording ● CLOCK SET ✤ CLOCK setup works in CAMERA, PLAYER, M.REC and M.PLAY modes. ✤ The DATE/TIME is automatically recorded onto a tape. Before recording, please set the DATE/TIME. 1. Press the MENU button. ■ The menu list will appear. 2. Turn the MENU DIAL to highlight INITIAL and press the ENTER button. CAM MODE INITIAL CAMERA A/V MEMORY VIEWER CLOCK SET REMOCON BEEP SOUND SHUT SOUND DEMO 3.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 38 ENGLISH Advanced Recording ● REMOCON ✤ THE REMOCON function works in CAMERA, PLAYER, M.REC, M.PLAY modes. ✤ The REMOCON option allows you to enable or disable the remote control for use with the camcorder. 1. Press the MENU button. ■ The menu list will appear. 2. Turn the MENU DIAL to highlight INITIAL and press the ENTER button. CAM MODE INITIAL CAMERA A/V MEMORY VIEWER CLOCK SET REMOCON BEEP SOUND SHUT SOUND DEMO 3.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 39 ENGLISH Advanced Recording ● BEEP SOUND ✤ THE BEEP SOUND function works in CAMERA, PLAYER, M.REC, M.PLAY modes. ✤ Use the MENU to setup the BEEP SOUND function. Select whether or not you want to hear a beep sound whenever you change a setup value. 1. Press the MENU button. ■ The menu list will appear. 2. Turn the MENU DIAL to highlight INITIAL and press the ENTER button.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 40 ENGLISH Advanced Recording ● SHUTTER SOUND ✤ You can hear SHUTTER SOUND only when the PHOTO function is working. ✤ Determines whether or not you wish to hear a SHUTTER SOUND when using the DSC feature. 1. Set the mode switch to MEMORY STICK. 2. Set the power switch to CAMERA mode. M.REC MODE INITIAL CAMERA A/V MEMORY VIEWER CLOCK SET REMOCON BEEP SOUND SHUT SOUND DEMO 3. Press the MENU button. ■ The menu list will appear. 4.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 41 ENGLISH Advanced Recording ● DEMONSTRATION ✤ Demonstration automatically shows you the major functions that are included with your camcorder so that you may use them more easily. ✤ The DEMONSTRATION function may only be used in the CAMERA mode without a tape inserted in the camcorder. ✤ The demonstration operates repeatedly until the DEMONSTRATION mode switched OFF. 1. Set the camcorder to CAMERA mode. 2. Press the MENU button.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 42 ENGLISH Advanced Recording ● PROGRAM AE ✤ The PROGRAM AE function works in CAMERA or M.REC mode only. ✤ The PROGRAM AE mode allows you to adjust shutter speeds and apertures to suit different recording conditions. ✤ They give you creative control over the depth of field. ■ AUTO mode - Auto balance between the subject and the background. - To be used in normal conditions.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 43 ENGLISH Advanced Recording Setting the PROGRAM AE 1. Press the MENU button. ■ The menu list will appear. CAM MODE INITIAL CAMERA A/V MEMORY VIEWER 2. Turn the MENU DIAL to highlight CAMERA and press the ENTER button. 3. Select PROGRAM AE from the submenu. PROGRAM AE WHT. BALANCE D.ZOOM EIS DSE SELECT FLASH SELECT CUSTOM 4. Press the ENTER button to enter the sub-menu. CAM MODE 5. Using the MENU DIAL, select the PROGRAM AE mode.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 44 ENGLISH Advanced Recording ● WHT. BALANCE (WHITE BALANCE) ✤ The WHITE BALANCE function works in CAMERA or M.REC mode only. ✤ The WHITE BALANCE is a recording function that preserves the unique color of the object in any recording condition. ✤ You may select the appropriate WHITE BALANCE mode to obtain good quality color of the image. ■ AUTO ( ) : This mode is generally used to control the WHITE BALANCE automatically.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 45 ENGLISH Advanced Recording Zooming In and Out with DIGITAL ZOOM ✤ Zoom works in CAMERA/M.REC mode only. Zooming In and Out ✤ Zooming is a recording technique that lets you change the size of the subject in a scene. For more professional looking recordings, do not use the zoom function too often. ✤ You can zoom using variable zoom speeds. ✤ Use these features for different shots.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 46 ENGLISH Advanced Recording Digital Zoom ✤ More than 10x zoom is achieved digitally. ✤ The picture quality may deteriorate depending on how much you zoom in on the subject. ✤ We recommend that you use the EIS feature with DIGITAL ZOOM for picture stability. (see page 47) 1. Set the camcorder to CAMERA or M.REC mode. 2. Press the MENU button. ■ The menu list will appear. 3. Turn the MENU DIAL to CAMERA and press the ENTER button.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 47 ENGLISH Advanced Recording ● EIS (Electronic Image Stabilizer) ✤ The EIS function works in CAMERA/M.REC mode only. ✤ EIS(Electronic Image Stabilizer) is a function that compensates for any shaking or hand movement while holding the camcorder (within reasonable limits). ✤ It provides more stable pictures when: ■ Recording a small object close-up ■ Recording and walking at the same time ■ Recording through the window of a vehicle 1.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 48 ENGLISH Advanced Recording ● DSE(Digital Special Effects) SELECT ✤ ✤ ✤ ✤ The DSE function works in CAMERA and M.REC mode only. The digital effects enable you to give a creative look to your recording by adding various special effects. Select the appropriate digital effect for the type of picture that you wish to record and the effect you wish to create. There are 9 DSE modes. a. ART mode This mode gives the images a coarse effect.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 49 ENGLISH Advanced Recording Selecting an effect 1. Set the camcorder to CAMERA mode. CAM MODE 2. Press the MENU button. ■ The menu list will appear. INITIAL CAMERA A/V MEMORY VIEWER 3. Turn the MENU DIAL to highlight CAMERA and press the ENTER button. PROGRAM AE WHT. BALANCE D.ZOOM EIS DSE SELECT FLASH SELECT CUSTOM 4. Select DSE SELECT from the submenu. CAM MODE 5. Press the ENTER button to enter the sub-menu. 6.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 50 ENGLISH Advanced Recording ● FLASH SELECT (SCD87 only) ✤ The Flash Select function works in CAMERA or M.REC mode only, when the Flash Light (not supplied) is connected to SmartShoe. 1. Install the Flash Light (optional accessory) on SmartShoe. 2. Press the MENU button. ■ The menu list will appear. 3. Turn the MENU DIAL to highlight CAMERA and press the ENTER button. 4. Select FLASH SELECT from the submenu. 5.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:03 PM Page 51 ENGLISH Advanced Recording ● CUSTOM.Q ✤ You can customize settings and save them for future use. ■ The CUSTOM.Q function operates in the CAMERA and M.REC mode. ✤ If you want to use the CUSTOM.Q function (see page 58) correctly, set the status of each item as desired before using the CUSTOM.Q function. ✤ You can set and store the following items: ■ PROGRAM AE, WHT.BALANCE, D.ZOOM, EIS, DSE SELECT 1. Set the power switch to CAMERA mode. 2.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:04 PM Page 52 ENGLISH Advanced Recording ● REC MODE ✤ The REC MODE function works in both CAMERA and PLAYER modes. ✤ This camcorder records and plays back in SP (standard play) mode and in LP (long play) mode. ■ SP (standard play): This mode permits 60 minutes of recording time with a DVM60 tape. ■ LP (long play): This mode permits 90 minutes of recording time with a DVM60 tape. 1. Set the camcorder to CAMERA or PLAYER mode. 2. Press the MENU button.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:04 PM Page 53 ENGLISH Advanced Recording ● AUDIO MODE ✤ The AUDIO MODE function works in CAMERA and PLAYER modes. ✤ This camcorder records sound in two ways. (12bit, 16bit) ■ 12bit : You can record two 12bit stereo sound tracks. The original stereo sound can be recorded onto the MAIN (SOUND1) track. Additional stereo sound can be dubbed onto the SUB (SOUND2) track. ■ 16bit : You can record one high quality stereo sound using the 16bit recording mode.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:04 PM Page 54 ENGLISH Advanced Recording ● WIND CUT ✤ The WIND CUT function works in CAMERA and PLAYER modes. ✤ The WIND CUT function minimizes wind noise or other noise while recording. - When the wind cut is on, some low sounds are eliminated along with the sound of the wind. 1. Set the camcorder to CAMERA mode. 2. Press the MENU button. ■ The menu list will appear. CAM MODE INITIAL CAMERA A/V MEMORY VIEWER 3.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:04 PM Page 55 ENGLISH Advanced Recording ● DATE/TIME ✤ The DATE/TIME function works in CAMERA, PLAYER, M.REC and M.PLAY modes. ✤ The date and time are automatically recorded on a special data area of the tape. 1. Press the MENU button. ■ The menu list will appear. 2. Turn the MENU DIAL to highlight VIEWER and press the ENTER button. 3. Turn the MENU DIAL to highlight DATE/TIME. 4. Press the ENTER button to select the sub-menu. 5.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:04 PM Page 56 ENGLISH Advanced Recording ● TV DISPLAY ✤ The TV DISPLAY function works in CAMERA, PLAYER, M.REC, M.PLAY modes. ✤ You can select the output path of the OSD (On Screen Display). ■ OFF: The OSD appears in the LCD screen only. ■ ON: The OSD appears in the LCD screen, EVF and TV. ■ Use the DISPLAY button located at the left side of the camcorder to turn ON/OFF all of the OSD displayed on the LCD/EVF/TV. 1. Set the camcorder to CAMERA, PLAYER, M.REC, M.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:04 PM Page 57 ENGLISH Advanced Recording U sing Q uick M enu ✤ Quick menu is available only in CAMERA mode. ✤ Quick menu is used to adjust camera functions by simply using the MENU SELECTOR button. This feature is useful for when you want to make simple adjustments without having to access the menus and submenus. ■ DATE/TIME - Each time you select DATE/TIME and press the ENTER button, it will be displayed in the order of DATE - TIME - DATE/TIME - OFF(See page 55).
00516B SCD86/D87-SEA (28~61) 3/29/02 3:04 PM Page 58 ENGLISH Advanced Recording ■ WHT. BALANCE (see page 44) - Each time you select WHT. BALANCE and press the ENTER button, the WHT.BALANCE preset values and AUTO are switched to each other. As similar in the PROGRAM AE, you can’t change the values unless you preset the WHT.BALANCE values,.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:04 PM Page 59 ENGLISH Advanced Recording SHUTTER SPEED & EXPOSURE ✤ You can set SHUTTER SPEED and EXPOSURE only in CAMERA mode. ✤ SHUTTER SPEED and EXPOSURE values can only be set in the Quick Menu. ✤ SHUTTER SPEED and EXPOSURE are automatically switched and/or deactivated. 1. Set the power switch to CAMERA mode. 2. Turn the MENU DIAL until you see icon on, and then press the ENTER button. ■ You see a screen on which you can select SHUTTER SPEED and EXPOSURE.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:04 PM Page 60 ENGLISH Advanced Recording EASY M ode (for Beginners) ✤ The EASY mode allows a beginner to make good recordings easily. ■ The EASY mode only operates in CAMERA, M.REC mode. 1. Set the power switch to CAMERA mode. 2. By pressing the EASY button, all functions on the camera will be set to off and the recording settings will be set to the following basic modes: ■ Battery level, recording mode, counter, DATE/TIME, and EIS ( ) will be displayed.
00516B SCD86/D87-SEA (28~61) 3/29/02 3:04 PM Page 61 ENGLISH Advanced Recording CU STO M M ode ✤ You can customize settings and save them for future use. ■ The CUSTOM SET function operates in CAMERA, M.REC mode only. ✤ Please set the custom settings before using this function. (see page 51) 1. Set the power switch to CAMERA mode. 2. To activate the CUSTOM function, press the CUSTOM button. ■ “CUSTOM.Q” will be displayed on the screen. 3. Press START/STOP to start recording.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 62 ENGLISH Advanced Recording M F/ AF (M anual Focus/ Auto Focus) ✤ The MF/AF function works in CAMERA, M.REC mode only. ✤ In most situations, it is better to use the automatic focus feature, as it enables you to concentrate on the creative side of your recording. ✤ Manual focusing may be necessary under certain conditions that make automatic focusing difficult and/or unreliable.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 63 ENGLISH Advanced Recording BLC (Back Light Compensation) ✤ BLC works in CAMERA/M.REC mode. ✤ Back lighting exists when the subject is darker than the background: ■ The subject is in front of a window. ■ The person to be recorded is wearing white or shiny clothes and is placed against a bright background; the person’s face is too dark to distinguish his/her features. ■ The subject is outdoors and the background is overcast.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 64 ENGLISH Advanced Recording Fade In and O ut ✤ The FADE function works in CAMERA, M.REC mode only. ✤ You can give your recordings a professional look by using special effects such as fading in at the beginning of a sequence or fading out at the end of a sequence. STBY 0:00:00 FADE To Start Recording 1. Before recording, hold down the FADE button. The picture and sound gradually disappear (fade out). 2.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 65 ENGLISH Advanced Recording Audio dubbing ✤ ✤ ✤ ✤ The AUDIO DUBBING function only works in PLAYER Mode. You can add sound to the original sound on a pre-recorded tape, recorded in SP mode with 12bit sound. Use the internal and external microphones or other audio equipment. The original sound will not be erased. Dubbing sound 1. Set the camcorder to PLAYER mode.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 66 ENGLISH Advanced Recording Dubbed audio Playback 1. Insert the dubbed tape and press MENU button. 2. Turn the MENU DIAL to highlight A/V. VCR MODE 3. Press the ENTER button to enter the sub-menu. 4. Use the MENU DIAL to select AUDIO SELECT from the submenu. 5. Press the ENTER button to enter the sub-menu. 6. Using the MENU DIAL, select the AUDIO playback channel. ■ Press the ENTER button to confirm the audio playback channel.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 67 ENGLISH Advanced Recording PH O TO Image Recording 1. Press the PHOTO button and hold it. ■ The still picture appears on the LCD monitor. ■ If you do not wish to record, release the button. 2. Release the PHOTO button and press the PHOTO button again in 2 seconds. ■ The still picture is recorded for about 6~7 seconds. PHOTO 3. After the PHOTO has been recorded, the camcorder returns to STBY mode.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 68 ENGLISH Advanced Recording N ITE PIX (0 lux recording) ✤ The NITE PIX function works in CAMERA/M.REC mode. ✤ The NITE PIX function enables you to record a subject in darkness. 1. Set the camcorder to CAMERA or M.REC mode. 2. Slide the NITE PIX switch to ON. ■ (NITE PIX indicator) appears on the LCD monitor. ■ The infrared(invisible rays) light is turned on automatically. 3. To cancel the NITE PIX function, slide the NITE PIX switch to OFF.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 69 ENGLISH Advanced Recording Various Recording Techniques ✤ In some situations different recording techniques may be required for more dramatic results. Note Please rotate the LCD screen carefully as excessive rotation may cause damage to the inside of the hinge that connects the LCD screen to the Camcorder. 1. General recording. 1 2 3 4 2. Downward recording. Making a recording with a top view of the LCD screen. 3. Upward recording.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 70 ENGLISH Playback Tape Playback ✤ The playback function works in PLAYER mode only. Playback on the LCD ✤ It is practical to view a tape using the LCD in a car or outdoors. Playback on a TV monitor ✤ To play back a tape, the television must have a compatible color system. ✤ We recommend that you use the AC Power Adapter as the power source for the camcorder. Connecting to a TV which has Audio/Video input jacks 1.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 71 ENGLISH Playback Connecting to a TV which has no Audio and Video input jacks ✤ You can connect your camcorder to a TV through a VCR. 1. Connect the camcorder and VCR with the Audio/Video cable. ■ The yellow plug : Video ■ The white plug : Audio(L) ■ The red plug : Audio(R) - STEREO only 2. Connect a TV to the VCR. 3. Set the power switch on the camcorder to PLAYER mode. 4. Turn on both the TV and VCR. ■ Set the input selector on the VCR to LINE.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 72 ENGLISH Playback Various Functions while in PLAYER mode ✤ The PLAY/STILL, STOP, FWD, REW buttons are located on the camcorder and the Remote Control. ✤ The F.ADV(Frame advance), X2, SLOW buttons are located on the Remote Control only. ✤ To prevent tape and head-drum wear, your camcorder will automatically stop if it is left in STILL or SLOW modes for more than 5 minutes. Playback pause ✤ Press the (PLAY/STILL) button during Playback or Slow playback.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 73 ENGLISH Playback Frame advance (To play back frame by frame) ● Press the F.ADV button on the Remote Control while in Still mode. The F.ADV function works in still mode only. ● To resume normal playback, press the (PLAY/STILL) button. ✤ Forward frame advance ■ Press the F.ADV button on the remote control in Still mode. ✤ Reverse frame advance ■ Press (_) the button on the remote control to change the direction in F.ADV mode. ■ Press the F.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 74 ENGLISH Playback ZERO M EM O RY ✤ The MEMORY function works in both CAMERA and PLAYER modes. ✤ You can mark a point on a tape that you want to return to following playback. 1. Press the ZERO MEMORY button on the remote control during playback or recording at the point you wish to return to.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 75 ENGLISH Recording in PLAYER mode Recording in PLAYER mode ✤ You can use this camcorder as a recorder. ✤ You can record a tape from VCR or TV. 1. Connect the camcorder and VCR or TV with the Audio/Video cable. VCR 2. Set the power switch of the camcorder to PLAYER mode. VIDEO AUDIO(L) AUDIO(R) S-VIDEO S-VIDEO 3. Turn on the VCR or TV. TV 4. Insert the blank tape with protection tab closed into the camcorder.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 78 ENGLISH USB interface ● Transferring a Digital Image through a USB Connection ✤ You can easily transfer a still image from a camera, tape, memory to a PC without additional add-on cards via a USB connection. ✤ You can transfer an image to a PC via a USB connection. ✤ If you transfer data to a PC, you need to install the software (Driver, Editing software) supplied with the camcorder.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 79 ENGLISH USB interface Installing D VC M edia Program ✤ Do not connect the camcorder to PC before installing the program. ✤ If another camera or scanner is connected, please disconnect it in advance. ✤ This explanation is based on Windows® 98SE OS. Program installation 1. 1. Insert the software CD into CD-ROM drive. - Installation selection screen appears in the monitor. 2.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 80 ENGLISH USB interface Install the USB Software (DVC media 4.0TM) 6. 4. When you see the Start window, click “DVC mediaTM” to continue installation. 5. Select a language and click “OK”. 6. When the dialog box appears, click the “NEXT” button. 7. Choose the Destination Folder: ■ To install to default folder, click “NEXT” ■ To install to different folder, click “ Browse” and select another folder. 7. 8. Click the “NEXT” button. 9.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 81 ENGLISH USB interface Connecting to a PC 1. Connect a USB cable to the USB port on the PC. 2. Connect the other end of the USB cable into the proper terminal on the camcorder. (USB jack) Notes ■ ■ If you disconnect the USB cable from the PC or the camcorder while transferring, the data transmission will stop and the data may be damaged.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 82 ENGLISH Digital Still Camera mode M EM O RY STICK ✤ The Memory Stick, stores and manages still images recorded by the camera.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 83 ENGLISH Digital Still Camera mode Inserting and ejecting the Memory Stick ● Inserting the card 1. Turn the Power switch to OFF. 2. Insert the Memory Stick into the CARD slot located beneath the camcorder, in the direction of the arrow. ● 1. 2. 3. Ejecting the card Turn the Power switch to OFF. Push the Memory Stick, then it comes out of the camcorder automatically. Pull out the Memory Stick.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 84 ENGLISH Digital Still Camera mode Structure of folders and files on the Memory Stick ✤ The still images that you recorded are saved in JPEG file format on the card. DCIM 100 SSDVC DCAM 0001 DCAM 0002 .. .. ✤ Each file has a file number and all files are assigned to a folder. ■ A file number from DCAM0001 to DCAM9999 is sequentially assigned to each recorded image. ■ Each folder is numbered from 100SSDVC to 999SSDVC and recorded on the CARD.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 85 ENGLISH Digital Still Camera mode Selecting the image quality ✤ You can select the quality of a still image to be recorded. Select the image quality 1. Set the mode switch to MEMORY STICK. 2. Set the power switch to the CAMERA mode. 3. Press the MENU button. ■ The menu list will appear. 4. Turn the MENU DIAL to highlight MEMORY. 5. Press the ENTER button to enter the sub-menu. 6. Turn the MENU DIAL to highlight QUALITY in the submenu. 7.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 86 ENGLISH Digital Still Camera mode Recording Still images to a M emory Stick in M .REC M ode. ✤ You cannot record moving pictures onto a Memory Stick. ✤ Audio cannot be recorded onto the Memory Stick. CAMERA Recording images to a Memory Stick 1. Set the mode switch to MEMORY STICK. OFF PLAYER 2. Set the power switch to CAMERA. 3. Press the PHOTO button and hold it. ■ The still picture appears on the LCD monitor.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 87 ENGLISH Digital Still Camera mode Recording an image from a cassette as a still image. ✤ You can record still image from a cassette onto a Memory Stick. ✤ If you want to recorded multiple still images from a cassette to a Memory Stick, use the COPY function. 1. Set the mode switch to MEMORY STICK. 2. Set the power switch to PLAYER mode. 3. Play back the cassette. 4. Press the PHOTO button and hold it.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 88 ENGLISH Digital Still Camera mode Viewing Still images ✤ You can playback and view still images recorded on the Memory Stick. ✤ There are 3 ways to view recorded images. ■ Single : To view an image frame by frame. ■ Slide show : To view all images automatically and in consecutive order. ■ Multi screen : To view six recorded images at a time. To view a Single image 1. Set the mode switch to MEMORY STICK. 2. Set the power switch to PLAYER mode.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 89 ENGLISH Digital Still Camera mode To view the Multi Screen 1. Set the mode switch to MEMORY STICK. 2. Set the power switch to PLAYER mode. ■ The last recorded image appears. 3. To view six stored images on single screen, press the PHOTO button. ■ A selection mark ( ) appears under the image. ■ Turn the menu dial to select a image. 100-0025 19 20 22 23 21 24 [24/24] 4. To return to single playback mode, press the PHOTO button again.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 90 ENGLISH Digital Still Camera mode Copying still images from a cassette to M emory Stick ✤ You can copy still images recorded with PHOTO function on a cassette onto a Memory Stick. 1. Set the power switch to the PLAYER mode. VCR MODE 2. Press the MENU button. 3. Turn the MENU DIAL to highlight A/V and press the ENTER button. ■ The submenu will appear.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 91 ENGLISH Digital Still Camera mode M arking images for printing ✤ This camcorder supports the DPOF (Digital Print Order Format) print format. ✤ You can automatically print images recorded on a Memory Stick with a printer supporting DPOF. ✤ There are 2 ways to make a PRINT MARK. ■ THIS FILE : You can set a print mark on the photo image displayed on the LCD. ■ ALL FILES : To print 1 copy each of all of the stored images. 1.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 92 ENGLISH Digital Still Camera mode Protection from accidental erasure ✤ You can protect important images from accidental erasure. ■ If you execute FORMAT, all images including protected images will be erased. 1. Set the mode switch to MEMORY STICK. 2. Set the power switch to PLAYER. ■ The last recorded image appears. ■ If there are no recorded images on the Memory Stick, NO STORED IMAGE! and 3. Using the (FWD) and will display on the screen.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 93 ENGLISH Digital Still Camera mode D eleting Still images ✤ You can erase the still images recorded on the Memory Stick. ✤ If you want to delete protected images, you must first deactivate the image protection. ✤ An image which has been deleted cannot be recovered. 1. Set the mode switch to MEMORY STICK. 2. Set the power switch to PLAYER. 3. Using the (FWD) and (REW) buttons, search for the still image that you want to delete. 4.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 94 ENGLISH Digital Still Camera mode Formatting the M emory Stick ✤ You can use the MEMORY FORMAT functions to completely delete all images and options on the Memory Stick, including protected images. ✤ The format function restores the Memory Stick to its initial states. ✤ The Memory Stick supplied with this camcorder has been formatted already.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:06 PM Page 95 ENGLISH Maintenance After finishing a recording ✤ At the end of a recording you must remove the power source. ✤ When recording with a Lithium Ion Battery Pack, leaving the pack on the camcorder can reduce the life span of the battery. Hence, it should be removed from the camcorder. 1. Slide the TAPE EJECT switch in the direction of the arrow. ■ Opening the cassette door ejects the tape automatically.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:07 PM Page 96 ENGLISH Maintenance Cleaning and M aintaining the Camcorder Cleaning the VIEWFINDER ● Releasing the eyecup 1. Pull the VIEWFINDER out and lift it up. 2. Turn the two screws counter-clockwise and pull the EYECUP out. 3. Clean the EYECUP and the VIEWFINDER screen with a soft cloth and cotton swab or a blower. ● Reattaching the EYECUP 4. Put the EYECUP on the VIEWFINDER. 5. Refit the screws.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:07 PM Page 97 ENGLISH Maintenance U sing Your Camcorder Abroad ✤ Each country or region has its own electric and color systems. ✤ Before using your camcorder abroad, check the following items. Power sources ■ You can use your camcorder in any country or area with the supplied AC Power Adapter within 100V to 240V, 50/60 Hz. ■ Use a commercially available AC plug Adapter, if necessary, depending on the design of the local wall outlet.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:07 PM Page 98 ENGLISH Troubleshooting Troubleshooting ✤ Before contacting a Samsung authorized service center, perform the following simple checks. They may save you the time and expense of an unnecessary call. Self Diagnosis Display Display Blinking 2MIN Informs that... Action slow the battery pack is almost discharged. Change to a charged one. slow When the remaining time on the tape is about 2 minutes Prepare a new one. the tape reached its end.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:07 PM Page 99 ENGLISH Troubleshooting Self Diagnosis Display in M.REC/M.PLAY mode Display Blinking Informs that... Action MEMORY STICK! slow There no card in the camcorder. Insert a Memory Stick. MEMORY FULL! slow There is not enough memory to record. Change to a new Memory Stick erase recorded image. NO STORED IMAGE! slow There is no images recorded on the Memory Stick. Record new images. WRITE PROTECT! slow The Memory Stick is record protected.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:07 PM Page 100 ENGLISH Troubleshooting ✤ If these instructions do not allow you to solve the problem, contact your nearest Samsung authorized service centrer. Symptom Explanation/Solution You cannot switch the Check the battery pack or the AC Power Adapter. camcorder on. 100 START/STOP button does not operate while recording. Check the POWER switch is set to CAM. You have reached the end of the cassette. Check the record protection tab on the cassette.
00516B SCD86/D87-SEA (62~97) 3/29/02 3:07 PM Page 101 ENGLISH Specifications M odel name: SCD 86/ D 87 System Video signal Video recording system Audio recording system Usable cassette Tape speed Tape recording time FF/REW time Image device Lens Filter diameter LCD monitor/Viewfinder Size/dot number LCD monitor Method Viewfinder Connectors Video output S-video output Audio output DV input/output USB output External mic NTSC 2 rotary heads, Helical scanning system Rotary heads, PCM system Digital video
00516B SCD86/D87-SEA (62~97) 3/29/02 3:07 PM Page 102 ENGLISH INDEX -A- -L- Accessories ............................................................................................... 12 Audio dubbing ............................................................................................ 65 AUDIO MODE ........................................................................................... 53 LCD ..................................................................................................
