User manual S19E200NY S19E200BR S19E200NW S19E200BW S22E200NY S22E200N S22E200B S22E200BW S23E200B S24E200BL The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table Of Contents BEFORE USING THE PRODUCT PREPARATIONS CONNECTING AND USING A SOURCE DEVICE 7 Copyright 7 Icons used in this manual 8 Cleaning 9 Securing the Installation Space 9 Precautions for storage 10 Safety Precautions 10 11 12 14 Symbols Electricity and Safety Installation and Safety Operation and Safety 18 Correct posture to use the product 19 Checking the Components 19 Checking the Components 20 Parts 20 24 Frontal Buttons Reverse Side 25 Installation 25 26 27 28 29
Table Of Contents SCREEN SETUP CONFIGURING TINT 34 Brightness 34 Configuring Brightness 35 Contrast 35 Configuring Contrast 36 Sharpness 36 Configuring Sharpness 37 Eye Saver Mode 37 Configuring Eye Saver Mode 38 Game Mode 38 Configuring Game Mode 39 SAMSUNG MAGIC Bright 39 Configuring SAMSUNG MAGIC Bright 41 SAMSUNG MAGIC Angle (S19E200NY / S19E200NW / S22E200NY / S22E200N) 41 Configuring SAMSUNG MAGIC Angle 43 SAMSUNG MAGIC Upscale 43 Configuring SAMSUNG MAGIC Upscale 44
Table Of Contents RESIZING OR RELOCATING THE SCREEN SETUP AND RESET 51 Blue 51 Configuring Blue 52 Color Tone 52 Configuring the Color Tone Settings 53 Gamma 53 Configuring Gamma 54 Language 54 Changing the Language 55 Menu H-Position & Menu V-Position 55 Configuring Menu H-Position & Menu VPosition 56 Display Time 56 Configuring Display Time 57 Transparency 57 Changing Transparency 58 Reset 58 Initializing Settings (Reset) 59 Eco Saving Plus 59 Configuring Eco Saving P
Table Of Contents INFORMATION MENU AND OTHERS INSTALLING THE SOFTWARE TROUBLESHOOTING GUIDE SPECIFICATIONS 65 Source Detection (S19E200BR / S19E200BW / S22E200B / S22E200BW / S23E200B / S24E200BL) 65 Configuring Source Detection 66 INFORMATION 66 Displaying INFORMATION 67 Configuring Brightness, Contrast and Sharpness from the Initial Screen 68 Magic Tune 68 68 69 What is MagicTune? Installing the Software Removing the Software 70 MultiScreen 70 71 Installing the Software Removing the
Table Of Contents APPENDIX 95 Contact SAMSUNG WORLD WIDE 103 Responsibility for the Pay Service (Cost to Customers) 103 103 103 Not a product defect A Product damage caused by customer's fault Others 104 Correct Disposal 104 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) 105 Terminology INDEX Table Of Contents 6
Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. © 2015 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Before Using the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. 3. Wipe the monitor screen using a clean, soft and dry cloth.
Before Using the Product Securing the Installation Space Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. The exterior may differ depending on the product. 3.93 inches (10 cm) 3.93 inches (10 cm) 3.93 inches (10 cm) 3.93 inches (10 cm) 3.
Before Using the Product Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result. Do not plug many products into the same power socket. Otherwise, the socket may overheat and cause a fire. Do not touch the power plug with wet hands. Otherwise, an electric shock may result.
Before Using the Product Caution Do not unplug the power cord when the product is in use. The product may become damaged by an electric shock. Do not use the power cord for products other than authorized products supplied by Samsung. ! An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed. If any problem occurs in the product, unplug the power cable to completely cut the power to the product.
Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). The product may fall and break or cause a personal injury. Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. ! An electric shock or fire may result.
Before Using the Product Put down the product carefully. The product may fall and break or cause a personal injury. ! SAMSUNG ! Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical substances, extreme temperatures or a significant presence of moisture, or a place where the product will operate continuously for an extended period of time) may seriously affect its performance.
Before Using the Product If there is a thunderstorm or lightning strike, turn off the power and disconnect the power cable. ! An electric shock or fire may result. Do not drop objects on the product or apply impact. An electric shock or fire may result. ! Do not move the product by pulling the power cord or any cable. Otherwise, the cable may be damaged and product failure, an electric shock or fire may result. If a gas leakage is found, do not touch the product or power plug.
Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ! If you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver. -_! Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc.).
Before Using the Product Do not hold the monitor upside-down or move it by holding the stand. The product may fall and break or cause a personal injury. Do not use humidifiers or stoves around the product. An electric shock or fire may result. Rest your eyes for more than 5 minutes for every 1 hour of product use. Eye fatigue will be relieved. ! Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
Before Using the Product Correct posture to use the product Use the product in the correct posture as follows: Straighten your back. Allow a distance of 45 to 50 cm between your eye and the screen, and look slightly downward at the screen. Keep your eyes directly in front of the screen. Adjust the angle so light does not reflect on the screen. Keep your forearms perpendicular to your upper arms and level with the back of your hands. Keep your elbows at about a right angle.
1 1.1 Preparations Checking the Components 1.1.1 Checking the Components Contact the dealer from whom you purchased the product if any item is missing. The appearance of the components and items sold separately may differ from the image shown. Components Quick setup guide Warranty card (Not available in some locations) Regulatory guide User manual Power cable D-SUB cable (optional) DVI cable (optional) Stand Stand Connector (optional) Components may vary depending on the country.
1 1.2 Preparations Parts 1.2.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. S19E200NY / S19E200NW / S22E200NY / S22E200N Key Guide MENU EYE SAVER SOURCE AUTO MENU EYE SAVER SOURCE AUTO Icons Description MENU Open or close the onscreen display (OSD) menu, or return to the parent menu.
1 Preparations Icons Description Move to the upper or lower menu or adjust the value for an option on the OSD menu. Use this button to control the brightness, contrast and sharpness of the screen. Confirm a menu selection. Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/DVI). If you power on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.
1 Preparations S19E200BR / S19E200BW / S22E200B / S22E200BW / S23E200B / S24E200BL Key Guide MENU EYE SAVER SOURCE MENU EYE SAVER SOURCE Icons Description MENU Open or close the onscreen display (OSD) menu, or return to the parent menu. OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings. Enable: To lock the OSD control, press the [ MENU ] button for 10 seconds.
1 Preparations Icons Description Confirm a menu selection. Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/DVI). If you power on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen. This function is not available for products with an Analog interface only. Press the [AUTO] button to automatically adjust the screen settings.
1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. S19E200BR / S19E200BW / S22E200B S22E200BW / S23E200B / S24E200BL DVI IN DVI IN RGB IN RGB IN S19E200NY / S19E200NW / S22E200NY / S22E200N POWER IN RGB IN POWER IN Port POWER IN POWER IN RGB IN Ports Connect the power cord for your monitor to the POWER IN port on the back of the product. Connect to a PC using the DVI cable.
1 1.3 Preparations Installation 1.3.1 Attaching the Stand Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Insert the Stand Connector into the Stand in the direction shown by the figure. Check if the Stand Connector is firmly connected. Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
1 Preparations 1.3.2 Removing the Stand The exterior may differ depending on the product. Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product faces downwards. While holding the stand neck with one hand, pound the other fisted hand down onto the top of the stand base in the direction of the arrow to detach the stand base. Turn the connecting screw at the bottom of the stand base to separate it.
1 Preparations 1.3.3 Adjusting the Product Tilt The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -1° (± 2°) - 20° (± 2°) You can adjust the tilt of your monitor. Hold the lower part of the product and adjust the tilt carefully.
1 Preparations 1.3.4 Installing a Wall-mount Kit or Desktop Stand Before Installation Power the product off and remove the power cable from the power socket. Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion. Hold the main body of the product with your hand as shown by the figure. Pull the stand in the direction of the arrow as shown in the figure to separate it.
1 Preparations Notes Using a screw longer than the standard length can damage the internal components of the product. The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications. Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit or desktop stand using excessive force. The product may get damaged or fall and cause personal injury.
2 2.1 Connecting and Using a Source Device Before Connecting DVI IN POWER IN RGB IN 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. 2.2 Check the types of ports at the back of the product you want to connect.
2 2.3 Connecting and Using a Source Device Connecting and Using a PC 2.3.1 Connecting to a PC Select a connection method suitable for your PC. Connecting parts may differ in different products. Connection Using the D-SUB Cable (Analog Type) Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. RGB IN 1 2 Connect the D-SUB cable to the [RGB IN] port on the back of the product and the RGB port on the PC.
2 Connecting and Using a Source Device 2.3.2 Driver Installation You can set the optimum resolution and frequency for this product by installing the corresponding drivers. An installation driver is contained on the CD supplied with the product. If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and download the file. 1 2 3 4 Insert the user manual CD provided with the product into the CD-ROM drive.
2 Connecting and Using a Source Device 2.3.3 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on the product and change the resolution on your PC to the optimum setting. 6HWXS *XLGH 7KH RSWLPDO UHVROXWLRQ IRU WKLV PRQLWRU LV DV IROORZV ****x**** **Hz 8VH WKH DERYH VHWWLQJV WR VHW WKH UHVROXWLRQ RQ \RXU 3& (QJOLVK 2.
3 3.1 Screen Setup Configure the screen settings such as brightness. Brightness You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. This menu is not available when Eco Saving Plus is set. This menu is not available when Eye Saver Mode is enabled. The functions available on the monitor may vary depending on the model.
3 3.2 Screen Setup Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. This menu is not available when Game Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.2.
3 3.3 Screen Setup Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. SAMSUNG This menu is not available when MAGIC Upscale is in Mode1 or Mode2. This menu is not available when Game Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.3.
3 3.4 Screen Setup Eye Saver Mode Set to an optimum picture quality suitable for eye relaxation. TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for lower blue light levels. When Eye Saver Mode is 'On', the blue light that wavelength is around 400nm will become lower and lower, and one hour later it will approach the optimum picture quality suitable for eye relaxation.
3 3.5 Screen Setup Game Mode Configure the product screen settings for game mode. Use this feature when playing games on a PC or when a game console such as PlayStation™ or Xbox™ is connected. This menu is not available when Eye Saver Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.5.1 Configuring Game Mode 1 Press any button on the front of the product to display the Key Guide.
3 3.6 Screen Setup SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used. This menu is not available when Eco Saving Plus is set. This menu is not available when Game Mode is enabled. This menu is not available when Eye Saver Mode is enabled. SAMSUNG This menu is not available when MAGIC Angle is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product.
3 Screen Setup Standard: Obtain a picture quality suitable for editing documents or using Internet. Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content. 4 5 Dynamic Contrast: Obtain balanced brightness through automatic contrast adjustment. Press [ ] to move to the option you want and press [ ]. The selected option will be applied.
3 3.7 Screen Setup SAMSUNG MAGIC Angle (S19E200NY / S19E200NW / S22E200NY / S22E200N) SAMSUNG MAGICAngle allows you to configure the settings to obtain the optimum picture quality according to your viewing angle. SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. This menu is not available when Game Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product.
3 Screen Setup 4 5 Press [ ] to move to the option you want and press [ ]. The selected option will be applied.
3 3.8 Screen Setup SAMSUNG MAGIC Upscale SAMSUNG MAGICUpscale function can enhance the layers of the picture details and the vividness of the picture. The function has more obvious effects on low-resolution pictures. SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. This menu is not available when Game Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.8.
3 3.9 Screen Setup Image Size Change the picture size. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.9.1 Changing the Image Size 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to PICTURE and press [ Press [ ] to move to Image Size and press [ ] on the product. ] on the product. The following screen will appear.
3 Screen Setup In AV mode (S19E200BR / S19E200BW / S22E200B / S22E200BW / S23E200B / S24E200BL) PICTURE SAMSUNG MAGIC Upscale Image Size H-Position V-Position 4:3 Choose the size and aspect ratio of the picture displayed on screen. 16:9 Screen Fit Coarse Fine AUTO PICTURE SAMSUNG MAGIC Upscale Image Size H-Position V-Position 4:3 Choose the size and aspect ratio of the picture displayed on screen. Wide Screen Fit Coarse Fine AUTO 4:3: Display the picture with an aspect ratio of 4:3.
3 Screen Setup 3.10 H-Position & V-Position H-Position: Move the screen to the left or right. V-Position: Move the screen up or down. This menu is available in Analog mode. This menu is only available when Image Size is set to Screen Fit in AV Mode. When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally ,select Screen Fit to adjust horizontal position in 0-6 levels. The functions available on the monitor may vary depending on the model.
3 Screen Setup 3.11 Coarse Adjust the screen frequency. This menu is available in Analog mode only. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.11.1 Adjusting Coarse 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to PICTURE and press [ Press [ ] to move to Coarse and press [ ] on the product. ] on the product.
3 Screen Setup 3.12 Fine Fine-adjust the screen to obtain a vivid picture. This menu is available in Analog mode only. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.12.1 Adjusting Fine 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to PICTURE and press [ Press [ ] to move to Fine and press [ ] on the product.
4 Configuring Tint A detailed description of each function is provided. Refer to your product for details. SAMSUNG Adjust the tint of the screen. This menu is not available when MAGIC Bright is set to Cinema or Dynamic Contrast mode. This menu is not available when Game Mode or Eye Saver Mode is enabled. 4.1 Red Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. SAMSUNG This menu is not available when MAGIC Bright is in Web mode mode.
4 4.2 Configuring Tint Green Adjust the value of the color green in the picture. (Range: 0~100) A higher value will increase the intensity of the color. SAMSUNG This menu is not available when MAGIC Bright is in Web mode mode. 4.2.1 Configuring Green 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ Press [ ] to move to Green and press [ ] on the product.
4 4.3 Configuring Tint Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. SAMSUNG This menu is not available when MAGIC Bright is in Web mode mode. 4.3.1 Configuring Blue 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ Press [ ] to move to Blue and press [ ] on the product. ] on the product.
4 4.4 Configuring Tint Color Tone Adjust the general color tone of the picture. SAMSUNG This menu is not available when MAGIC Angle is enabled. 4.4.1 Configuring the Color Tone Settings 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ Press [ ] to move to Color Tone and press [ ] on the product. ] on the product. The following screen will appear.
4 4.5 Configuring Tint Gamma Adjust the mid-range brightness (Gamma) of the picture. SAMSUNG This menu is not available when MAGIC Bright is in Web mode mode. SAMSUNG This menu is not available when MAGIC Angle is enabled. 4.5.1 Configuring Gamma 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ ] on the product.
5 5.1 Resizing or Relocating the Screen Language Set the menu language. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. 5.1.1 Changing the Language 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to MENU SETTINGS and press [ Press [ ] to move to Language and press [ ] on the product.
5 5.2 Resizing or Relocating the Screen Menu H-Position & Menu V-Position Menu H-Position: Move the menu position to the left or right. Menu V-Position: Move the menu position up or down. 5.2.1 Configuring Menu H-Position & Menu V-Position 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to MENU SETTINGS and press [ ] on the product.
5 5.3 Resizing or Relocating the Screen Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. 5.3.1 Configuring Display Time 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
5 5.4 Resizing or Relocating the Screen Transparency Set the transparency for the menu windows: 5.4.1 Changing Transparency 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to MENU SETTINGS and press [ Press [ ] to move to Transparency and press [ ] on the product. ] on the product. The following screen will appear.
6 6.1 Setup and Reset Reset Return all the settings for the product to the default factory settings. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.1.1 Initializing Settings (Reset) 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Reset and press [ ] on the product. ] on the product.
6 6.2 Setup and Reset Eco Saving Plus The Eco Saving Plus function reduces power consumption by controlling the electric current used by the monitor panel. SAMSUNG This menu is not available when MAGIC Bright is in Dynamic Contrast mode. This menu is not available when Game Mode is enabled. This menu is not available when Eye Saver Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.2.
6 Setup and Reset 4 High: The power consumption will be reduced by 50% over the default setting. Move the focus to the desired option by pressing [ Press [ 5 ] button on the DOME Type JOG Button. ] button. The selected option will be applied.
6 6.3 Setup and Reset Off Timer You can set the product to automatically turn off. 6.3.1 Configuring Off Timer 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Off Timer and press [ ] on the product. Press [ ] to move to Off Timer and press [ ] on the product. The following screen will appear.
6 Setup and Reset 6.3.2 Configuring Turn Off After 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Off Timer and press [ Press [ ] to move to Turn Off After and press [ ] on the product. ] on the product. ] on the product. The following screen will appear. Off Timer Set the monitor to automatically turn off after a certain time period.
6 6.4 Setup and Reset PC/AV Mode (S19E200BR / S19E200BW / S22E200B / S22E200BW / S23E200B / S24E200BL) Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. This function does not support Analog mode. Supplied for the wide models only such as 16:9 or 16:10. If the monitor (when set to DVI) is in power saving mode or is displaying the message Check Signal Cable, press the [ MENU ] button to display the On Screen Display (OSD).
6 6.5 Setup and Reset Key Repeat Time Control the response rate of a button when the button is pressed. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.5.1 Configuring Key Repeat Time 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Key Repeat Time and press [ ] on the product.
6 6.6 Setup and Reset Source Detection (S19E200BR / S19E200BW / S22E200B / S22E200BW / S23E200B / S24E200BL) You can activate Source Detection. 6.6.1 Configuring Source Detection 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Source Detection and press [ ] on the product. ] on the product. The following screen will appear.
7 7.1 INFORMATION Menu and Others INFORMATION View the current input source, frequency and resolution. 7.1.1 Displaying INFORMATION 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 Press [ ] to move to INFORMATION. The current input source, frequency and resolution will appear.
7 7.2 INFORMATION Menu and Others Configuring Brightness, Contrast and Sharpness from the Initial Screen Adjust the Brightness, Contrast and Sharpness setting using the [ ] buttons in the initial screen (where no OSD menu is displayed). Brightness : SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. This menu is not available when Eco Saving Plus is enabled. This menu is not available when Eye Saver Mode is enabled.
8 8.1 Installing the Software Magic Tune 8.1.1 What is MagicTune? MagicTune is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor functions and easy-to-understand guidelines. You can adjust the product with the mouse and the keyboard without using the operating buttons of the product. 8.1.2 Installing the Software 1 2 Insert the installation CD into the CD-ROM drive. Select the MagicTune setup program.
8 Installing the Software 8.1.3 Removing the Software You can only remove MagicTune™ through [Add or Remove Programs] in Windows. To remove MagicTune™, complete the following steps. 1 Click [Start] select [Settings], and select [Control Panel] from the menu. For Windows XP, click [Start], and select [Control Panel] from the menu. 2 3 4 5 6 Double-click the [Add or Remove Programs] icon in the Control Panel. In the [Add/Remove] window, find and select MagicTune™so that it is highlighted.
8 8.2 Installing the Software MultiScreen MultiScreen MultiScreen enables users to use the monitor by partitioning multiple sections. 8.2.1 Installing the Software 1 2 Insert the installation CD into the [CD-ROM drive]. Select the "MultiScreen" setup program. If the pop-up screen for the software installation does not appear on the main screen, find and double-click the "MultiScreen" setup file on the [CD-ROM]. 3 4 When the Installation Wizard appears, click [Next].
8 Installing the Software 8.2.2 Removing the Software Click [Start], select [Settings]/[Control Panel], and then double-click [Add or Remove Programs]. Select "MultiScreen" from the program list and click the [Add/Delete] button.
9 9.1 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function. If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC, perform a self-diagnosis test.
9 Troubleshooting Guide Screen issue Issues Solutions The power LED is off. The screen will not switch on. Check that the power cable is connected properly. (Refer to "2.3 Connecting and Using a PC") The message Check Signal Cable appears. Check that the cable is properly connected to the product. (Refer to "2.3 Connecting and Using a PC") Check that the device connected to the product is powered on. Not Optimum Mode is displayed.
9 Troubleshooting Guide Issues There is no image on the screen and the power LED blinks every 0.5 to 1 second. Solutions The product is operating in power-saving mode. Press any key on the keyboard or move the mouse to return to normal operating mode. Source device issue Issues Solutions A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced. The LED lights on the frame of the product may be seen depending on the user's viewing angle.
9 9.2 Troubleshooting Guide Q&A Question How can I change the frequency? Answer Set the frequency on your graphics card. Windows XP: Go to Control Panel Appearance and Themes Advanced Display Settings Monitor, and adjust Refresh rate under Monitor settings. Windows ME/2000: Go to Control Panel Settings Advanced Display Monitor, and adjust Refresh rate under Monitor settings.
9 Troubleshooting Guide Question How can I change the resolution? Answer Windows XP: Go to Control Panel Appearance and Themes Display Settings, and adjust the resolution. Windows ME/2000: Go to Control Panel Display Settings, and adjust the resolution. Windows Vista: Go to Control Panel Appearance and Personalization Personalize Display Settings, and adjust the resolution.
10 Specifications 10.1 General (S19E200NY / S19E200NW) Model Name Size Panel S19E200NY 18.5 Inches (47 cm) 19.0 Inches (48 cm) 409.8 mm (H) x 230.4 mm (V) 408.24 mm (H) x 255.15 mm (V) 16.1 Inches (H) x 9.1 Inches (V) 16.1 Inches (H) x 10.0 Inches (V) 0.300 mm (H) x 0.300 mm (V) 0.2835 mm (H) x 0.2835 mm (V) 0.011811 Inches (H) x 0.011161 Inches (H) x 0.011161 Inches (V) Display area Pixel Pitch S19E200NW 0.011811 Inches (V) This product uses 100 to 240V.
10 Specifications 10.2 General (S19E200BW / S19E200BR) Model Name Size Panel Display area Pixel Pitch S19E200BW S19E200BR 19.0 Inches (48 cm) 19.0 Inches (48 cm) 408.24 mm (H) x 255.15 mm (V) 376.32 mm (H) x 301.06 mm (V) 16.1 Inches (H) x 10.0 Inches (V) 14.8 Inches (H) x 11.9 Inches (V) 0.2835 mm (H) x 0.2835 mm (V) 0.294 mm (H) x 0.294 mm (V) 0.011161 Inches (H) x 0.011161 Inches (V) 0.011575 Inches (H) x 0.011575 Inches (V) This product uses 100 to 240V.
10 Specifications 10.3 General (S22E200NY / S22E200N) Model Name Size Panel Display area Pixel Pitch S22E200NY / S22E200N 21.5 Inches (54 cm) 476.64 mm (H) x 268.11 mm (V) 18.8 Inches (H) x 10.6 Inches (V) 0.24825 mm (H) x 0.24825 mm (V) 0.009774 Inches (H) x 0.009774 Inches (V) This product uses 100 to 240V. Power Supply Dimensions (W x H x D) / Weight Refer to the label at the back of the product as the standard voltage can vary in different countries. Without Stand With Stand 504.3 x 301.9 x 77.
10 Specifications 10.4 General (S22E200B / S22E200BW) Model Name Size Panel Display area S22E200B S22E200BW 21.5 Inches (54 cm) 22.0 Inches (55 cm) 476.64 mm (H) x 268.11 mm (V) 473.76 mm (H) x 296.1 mm (V) 18.8 Inches (H) x 10.6 Inches (V) 18.7 Inches (H) x 11.7 Inches (V) 0.24825 mm (H) x 0.24825 mm (V) 0.282 mm (H) x 0.282 mm (V) Pixel Pitch 0.009774 Inches (H) x 0.009774 Inches (V) 0.011102 Inches (H) x 0.011102 Inches (V) This product uses 100 to 240V.
10 Specifications 10.5 General (S23E200B / S24E200BL) Model Name Size Panel Display area Pixel Pitch S23E200B S24E200BL 23.0 Inches (58 cm) 23.6 Inches (59 cm) 509.76 mm (H) x 286.74 mm (V) 521.28 mm (H) x 293.22 mm (V) 20.1 Inches (H) x 11.3 Inches (V) 20.5 Inches (H) x 11.5 Inches (V) 0.2655 mm (H) x 0.2655 mm (V) 0.2715 mm (H) x 0.2715 mm (V) 0.010453 Inches (H) x 0.010453 Inches (V) 0.010689 Inches (H) x 0.010689 Inches (V) This product uses 100 to 240V.
10 Specifications 10.6 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power-saving mode functions only when the product is connected to a PC that has a power-saving function.
10 Specifications PowerSaver Power Consumption Normal operation mode Typical 25 W Energy Star Power Consumption Power saving mode Power off (Power button) Typical 22 W Less than 0.1 W Less than 0.1 W (S23E200B) Power Consumption Typical 25 W Typical 22 W Less than 0.1 W Less than 0.1 W (S24E200BL) The displayed power consumption level can vary in different operating conditions or when settings are changed. (S**E200** Model Power saving mode / Power off (Power button) : Less than 0.
10 Specifications 10.7 Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product. Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
10 Specifications S19E200NY Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.
10 Specifications S19E200NW Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S19E200BW Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S19E200BR Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S22E200NY Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S22E200N Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S22E200B Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S22E200BW Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S23E200B Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S24E200BL Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com/us/ support CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca/ support (English) http://www.samsung.com/ca_fr/ support (French) LATIN AMERICA ARGENTINE 0800-555-SAMSUNG (0800-555-7267) http://www.samsung.com/ar/ support BOLIVIA 800-10-7260 http://www.samsung.
Appendix LATIN AMERICA EL SALVADOR 800-6225 800-0726-7864 http://www.samsung.com/latin/ support (Spanish) http://www.samsung.com/latin_en/ support (English) GUATEMALA 1-800-299-0013 1-800-299-0033 http://www.samsung.com/latin/ support (Spanish) http://www.samsung.com/latin_en/ support (English) HONDURAS 800-2791-9267 800-2791-9111 http://www.samsung.com/latin/ support (Spanish) http://www.samsung.com/latin_en/ support (English) JAMAICA 1-800-234-7267 1-800-SAMSUNG (726-7864) http://www.samsung.
Appendix LATIN AMERICA URUGUAY 000-405-437-33 http://www.samsung.com/latin/ support (Spanish) http://www.samsung.com/latin_en/ support (English) VENEZUELA 0-800-SAMSUNG (726-7864) http://www.samsung.com/ve/ support EUROPE AUSTRIA 0800-SAMSUNG (0800-7267864) http://www.samsung.com/at/ support BELGIUM 02-201-24-18 http://www.samsung.com/be/ support (Dutch) http://www.samsung.com/be_fr/ support (French) BOSNIA 055 233 999 http://www.samsung.
Appendix EUROPE GREECE 80111-SAMSUNG (80111 726 7864) only from land line http://www.samsung.com/gr/ support (+30) 210 6897691 from mobile and land line HUNGARY 0680SAMSUNG (0680-726-786) 0680PREMIUM (0680-773-648) http://www.samsung.com/hu/ support ITALIA 800-SAMSUNG (800.7267864) http://www.samsung.com/it/ support LATVIA 8000-7267 http://www.samsung.com/lv/ support LITHUANIA 8-800-77777 http://www.samsung.com/lt/ support LUXEMBURG 261 03 710 http://www.samsung.
Appendix EUROPE SWEDEN 0771 726 7864 (0771-SAMSUNG) http://www.samsung.com/se/ support SWITZERLAND 0800 726 78 64 (0800-SAMSUNG) http://www.samsung.com/ch/ support (German) http://www.samsung.com/ch_fr/ support (French) UK 0330 SAMSUNG (7267864) http://www.samsung.com/uk/ support CIS ARMENIA 0-800-05-555 http://www.samsung.com/support AZERBAIJAN 0-88-555-55-55 http://www.samsung.com/support BELARUS 810-800-500-55-500 http://www.samsung.com/support GEORGIA 0-800-555-555 http://www.
Appendix CHINA HONG KONG (852) 3698 4698 http://www.samsung.com/hk/ support (Chinese) http://www.samsung.com/hk_en/ support (English) MACAU 0800 333 http://www.samsung.com/support S.E.A AUSTRALIA 1300 362 603 http://www.samsung.com/au/ support INDONESIA 021-56997777 http://www.samsung.com/id/ support 08001128888 JAPAN 0120-363-905 http://www.samsung.com/jp/ support MALAYSIA 1800-88-9999 603-77137477 (Overseas contact) http://www.samsung.
Appendix MENA ALGERIA 021 36 11 00 http://www.samsung.com/n_africa/ support BAHRAIN 8000-GSAM (8000-4726) http://www.samsung.com/ae/ support (English) http://www.samsung.com/ae_ar/ support (Arabic) EGYPT 08000-7267864 16580 http://www.samsung.com/eg/ support IRAN 021-8255 [CE] http://www.samsung.com/iran/ support JORDAN 0800-22273 http://www.samsung.com/Levant/ support (English) 06 5777444 KUWAIT 183-CALL (183-2255) http://www.samsung.com/ae/ support (English) http://www.samsung.
Appendix MENA TURKEY 444 77 11 http://www.samsung.com/tr/ support U.A.E 800-SAMSUNG (800 - 726 7864) http://www.samsung.com/ae/ support (English) http://www.samsung.com/ae_ar/ support (Arabic) AFRICA BOTSWANA 8007260000 http://www.samsung.com/support BURUNDI 200 http://www.samsung.com/support CAMEROON 7095-0077 http://www.samsung.com/africa_fr/ support COTE D’ IVOIRE 8000 0077 http://www.samsung.com/africa_fr/ support DRC 499999 http://www.samsung.
Appendix Responsibility for the Pay Service (Cost to Customers) When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. If a service technician gives instructions on how to use product or simply adjusts options without disassembling product. If a defect is caused by external environmental factors.
Appendix Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Appendix Terminology OSD (On Screen Display) On screen display (OSD) allows you to customize on-screen settings to optimize the picture quality as required. You can change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.
Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g. A resolution of 1920 x 1080 consists of 1920 horizontal pixels (horizontal resolution) and 1080 vertical lines (vertical resolution).
Index B INFORMATION 66 Before Connecting 30 Installation 25 Blue 51 Brightness 34 K Key Repeat Time 64 C Cleaning 8 Coarse 47 L Language 54 Color Tone 52 Connecting and Using a PC 31 Contact SAMSUNG WORLD WIDE 95 Contrast 35 M MultiScreen 70 Copyright 7 Correct Disposal 104 O Correct posture to use the product 18 Off Timer 61 D P Display Time 56 Parts 20 PC/AV Mode 63 E Eco Saving Plus 59 Q Eye Saver Mode 37 Q & A 75 F R Fine 48 Red 49 Requirements Before Contacting Samsung Custome
Index SAMSUNG MAGIC Upscale 43 Sharpness 36 Source Detection 65 Standard Signal Mode Table 84 T Terminology 105 Transparency 57 Index 108
