Adjusting the Sound Settings The sound settings can be adjusted to suit your personal preferences. hie 1 Press the MENU button. Result: The main menu is displayed, 2 Press the A or ¥ bunion fo select Sound. Result The options available in the Sound group are displayed. if 3 Press the I button 4 Press the A or ¥ button to select Equalizer. Press the W button Result: The Equalizer menu is displayed with the current option.
Extra Sound Settings & Auto Volume Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by Towering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. * Melody You can hear clear melody sound when the PDP is powered on or off.
Adjusting the Screen Position and Scale 1 Press the MENU button. Result: The main menu is displayed. 2 Press the A or ¥ button to select Setup, Result: The options available in the Setup group are displayed. 3 Press the » button. Result: The Screen Adjust is selected. 4 Press the » button again. ~ Result: The Screen Adjust menu is displayed with the Position selected, 5 Press the » button over again. Adjust the screen position by pressing the button.
Adjusting the Image Preferences (PC1/PC2 Mode) Press the MENU bunion. Result The main menu is displayed. Press the A or ¥ button (0 select Setup. Result The options available in the Setup group are displayed. Press the » bunion, Result: The Image Lock is selected. Press the »» button again. Result: The Image Lock menu is displayed with the Auto Adjustment selected. 5 Press the » button over again. Result: The screen size and frequency are automatically reset with the Auto Adjustment displayed.
Locking the Control buttons 1 Press the MENU button. Result: The main menu is displayed. 2 Press the A or '¥ button (0 select Setup. Result: The options available in the setup group are displayed. 3 Press the » bunion. 4 Press the A or '¥ bunion to select Rey Lock, 5 Press the «€or » button to change the setting (on or Of), Setting the Multiple Display Control (MDC) 1 Press the MENU bunion Result The main menu is displayed. 2 Press the A of '¥ button to select Setup.
Protecting the Screen Burning You can prevent the residual image of the PDP. 1 Press the MENU button, Beset: The main men is displayed. 2 Press the A or '¥ bunion to select Setup. Result: The options available in the Setup group are displayed. 3 Press the » button. 4 Press the A or ¥ button to select Burning Protection. 5 Press the » button. Result The Burning Protection menu is displayed with the Pixel Shift selected. 6 Press the » button again.
Setting the Multiple Screen You can gel the various display effect with many DPs. 1 Press the MENU button. LE Result ) Wik oo result: The main menu is displayed Sean a 2 Press the A or '¥ button to select Setup. Result The options available in the Setup group are displayed 3 Press the » button. 4 Press the A or ¥ button to select Video Wall. 8 Press the » button. Result: The video Wall menu is displayed with the Set selected 6 Set to on by pressing the «or » button.
Displaying the PC Information 1 Press the MENU button. Result The main menu is displayed. 2 Press the 4 or ¥ button lo select Setup Result The options available in the Setup group are displayed 3 Press the » button. 4 Press the A or ¥ button to select Information. § Press the > button Result The resolution, vertical frequency and horizontal frequency are displayed. Displaying the Setting Information You can view the setting status you select by pressing the “INFO” button on the remote control.
Setting and Displaying the Current Time You can set the clock so that the current time js displayed. You must also set the time if you wish to use the automatic on or off timers. 1 Press the MENU button. Result The main menu is displayed. 2 Pres the A or ¥ button fo select Function. Result: The options available in the Unction group are displayed. 3 Press the » bunion. 4 Press the A or ¥ bunion to select Time. Press the » bunion Result The Time menu is displayed with the Clock option a Hd selected.
Switching On and Off Automatically You can set the on or off time so that the PDP will: & Switch on automatically and tune to the volume of your choice at the time you select Sn ll + Switch off automatically at the time you select 1 Press the MENU button. Result: The main menu is displayed. 2 Press the 4 or ¥ button fo select Function. Result: The options available in the Function group are displayed. 3 Press the » button. 4 Press the A or ¥ button to select Time. Press the » button.
Setting the Sleep Timer You can select a time period of between 15 and 180 minutes after which the television automatically switches to Standby mode. 1 Press the TIMER button Bellyful The Sleep timer menu is displayed. + If the sleep timer is not yet set, Off Is displayed if the sleep timer is already set, the remaining time before which the television switches to Standby mode is displayed.
Turning On the Fan You can use the Fan if you are anxious for the PDP. 1 Crass the MENU button, Result. The main menu is displayed. 2 Press the A or ¥ button to select Function. Result The options available in the Function group are displayed 3 Press the » button. 4 Press the A or ¥ bunion lo select Electable Fan.
Viewing the Picture In Picture (PIP) You can display a sub picture within the main picture. In this way you can monitor the video input from any connected devices while monitoring other video input. 1 Press the MENU button. Result: The main menu is displayed, 2 Press the A or ¥ bunion to select pp. 3 Press the » button, Result: The PIP option is selected. So Locate Se 4 Set to om by pressing the «€or » bunion for activating the PIP feature. Result: The options available in the PIP group are displayed.
Viewing the Picture In Picture (PIP) (continued) ENTER Jr AUTO EFFECT ASPECT MOC om Co OD TPP TSE LOCATE Sore] SWAP BESSEL | <2 | Easy functions of remote control, Buttons Feature PINON Used to activate or deactivate the PIP feature directly, SZE Used to select a size of sub picture (Large, Wall, Double, Double. LOCATE Used to move the sub picture counterclockwise. SOURCE Used to assign a source of sub picture. SWAP Used to interchange the main picture and the sub picture.
Listening to the Sound of the Sub Picture During the PIP feature is activating, you can listen to the sound of the sub picture. 1 Press the MENU button, Result: The main menu is displayed. 2 Press the A or ¥ button fo select PIP Result: The options available in the BIP group are displayed. 3 Press the > button. 4 Press the & or ¥ button to select Sound Se.
Connecting to the Audio/Video Input The “VIDEO IN” connectors are used for equipment, such as a camcorder or VCR. Rear of the PDP VCR [Eh N Decoder / Video game device Video disc player The “VIDEO QUT” connectors used for the equipment with an Composite output, such as video game devices or video disc players.
Connecting to the S-Video Input The S-VIDEO and RCA connectors are used for equipment with an S-Video output, such as a camcorder or VCR, Camcorder Co Ee] lic] @ To play picture and sound, both the DIVIDED and RCA conciliators must be used.
Connecting to the DVI Input The “DVI IN” (video) and “AUDIO” connectors are used for equipment with a DVI output.
Setting up Your PC Software (Windows only) The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.
Input Mode (PC/DVI) Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: Standard Dot x Line Vertical Horizontal Vertical Horizontal frequency (Hz) frequency (kHz) polarity polarity VGA 640 x 350 75 ats N P 85 37.9 N P 640 x 400 85 ard P N 720 x 400 70 315 P N 85 arg P N 640 x 480 80 315 N N 72 37.9 N N 75 375 N N 85 433 N N SAGA B00 x 600 56 35.2 NP NP. 80 37.4 Pe P 72 48.1 P P 75 46.9 e P 85 53.
Pin Configurations PC Input Connector (pippin) CHERRY! centavo ff Converse) DVI Input {pippin) Connector i pin PIN PL ein Signal | 1 Hed (F) io 1 TM.D.S. Data 2 Green (G) } 2 T.M.D.S. Data i 3 Blue {B) 3 TM.D.8 Data Shield 4 Grounding 4 TMD.S. Data 5 Grounding (DDC) 8 T.M.0.8. Data i 6 Red (R) Grounding 6 Clock (DDC) Po Green (G) Grounding Po Data (DDC) 8 Blue {B) Grounding | 8 Not Connected i 9 Reserved | 9 TMD. Dali 10 Sync Grounding Loo TM.D.S. Data | i Grounding | 11 TMD.
Troubleshooting: Before Contacting Service Personnel Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the POP and contact your local dealer. Check that the mains lead has been connected to a wall socket Check that you have pressed the ON or OFF button Check the picture contrast and brightness settings, Hack the volume No sound or picture Check the volume.
Technical Specifications Exterior design and product specifications are subject to change without prior notice to improve the performance of this product. This PDP applies to Class B digital device for home use. This PDP has been registered for residential use in terms of EMI. So it can be used in all areas as well as residential areas. . : Exterior desire oo performance Dimensions. PPM4283 ~ 1027 x 79 x 630.5 mm ; 40.43 x 3.11 x 24.82 inches This PDP 2 (WxDxH) PPMS0H3 — 1204.6 x 79 x 724 mm ; 47.43 x 3.
~ AFTER SALES SERVICE Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
