Adjusting the Sound Settings The sound settings can be adjusted to suit your personal preferences. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the A or ¥ button to select Sound. Result: The options available in the Sound group are displayed. 3 Press the M button. 4 Press the A or ¥ button to select Equalizer. Press the IP button.
Extra Sound Settings + Auto Volume Each broadcasting station has its own signal conditions, and so iris not easy for you to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is fow. + Melody You can hear clear melody sound when the POP is powered on ar off.
Adjusting the Screen Position and Scale 1 Press the MENU bunion Beastly: The main menu is displayed 2 Press the A or ¥ bunion to select Setup. Result: The options available in the Setup group are displayed. 3 Press the » button. Result: The Screen Adjust is selected. 4 Press the button again. Has ult: The Screen Adjust menu is displayed with the Position selected. 5 Press the » button over again.
Adjusting the Image Preferences (PC1/PC2 Mode) 1 Press the MENU button. Result: The main menu is displayed 2 Press the A or '¥ button to select Setup. Result: The options available in the Setup group are displayed. 3 Press the » button. Result The mage Lock is selected, 4 Press the W button again. ult: The Image Lock menu is displayed with the Auto Adjustment selected, 5 Press the » button over again. Result The screen size and frequency are automatically reset with the Auto adjustment displayed.
Locking the Control buttons 1 Press the MENU bunion Result: The main many is displayed. 2 Press the A 0th button 0 select Setup. Result: The options available in the Setup group are displayed. 3 Press the » button. 4 Press the a or '¥ button to select Rey Lock 5 Press the «€or button to change the setting (On or Setting the Multiple Display Control (MDC) 1 Press the MENU bunion Result: The main menu is displayed, 2 Press the A or '¥ button fo select Setup.
Protecting the Screen Burning hdc ete You can prevent the residual image of the PDP. a 1 Press the MENU button. Result: The main menu is displayed. 2 Press the A or ¥ bunion to select Setup. Result: The options available in the Setup group are displayed. 3 Press the » bunion. 4 Press the A or '¥ button to select Burning Protection. 5 Press the » button, Result: The Burning Protection menu is displayed with the pixel Shift selected 6 Press the » button again.
Setting the Multiple Screen You can get the various display effect with many DPs. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the A or '¥ button to select Setup. Result: The options available in the Setup group are displayed. 3 Press the » button. 4 Press the A or '¥ button 10 select Video Wall. 5 Press the » button Result: The Video Wall menu is displayed with the Set selected. 6 Set to on by pressing the «or » bunion. 7 Press the A or ¥ button to select Screen Divider.
Displaying the PC Information 1 Press the MENU button. Result: The main menu is displayed. 2 Press the A or ¥ button {0 select Setup. Bsy The options available in the Setup group are displayed. 3 Press the » button.
Setting and Displaying the Current Time You can set the clock so that the current time is displayed. You must also set the time if you wish to use the automatic on or off timers. 1 Press the MENU button. Result The main menu is displayed. 2 Press the A or ¥ button to select Function. Result: The options available in the Function group are displayed. 3 Press the P button, 4 Press the A or ¥ button fo select Time.
Switching On and Off Automatically You can set the on or off time so that the PDF will: & Switch on automatically and tune to the volume of your choice at the time you select + Switch off automatically at the time you select 1 Crass the MENU button. Result: The main menu is displayed 2 Press the 4 or ¥ button to select Function. Basalt: The options available in the Function group are displayed, 3 Pies the » button. 4 Cross the A or ¥ button 10 select Time. Press the » button.
Setting the Sleep Timer You can select a time period of between 15 and 180 minutes after which the television automatically switches to Standby mode. 1 Press the TIMER button. result The Sleep timer menu is displayed. # If the sleep timer is not yet set, Off is displayed. if the sleep timer is already set, the remaining time before which the television switches to Standby mode is displayed.
Turning On the Fan You can use the Fan if you are anxious for the PDP. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the A or '¥ bunion {o select Function. Result The options available in the Function group are displayed. 3 Press the » button. 4 Press the A or ¥ button to select Electable Fan. 5 Press the 4 or > button to change the setting (on or OFF).
Viewing the Picture In Picture (PIP) You can display a sub picture within the main picture. tn this way you can monitor the video input from any connected devices while monitoring other video input. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the A or ¥ button to select PIP. 3 Press the » button. Result: The PIP option is selected 4 Set to on by pressing the « or I button for activating the PIP feature. Result The options available in the PIP group are displayed.
| Viewing the Picture In Picture (PIP) (continued) AUTO EFFECT ASPECT MDC [RFT SE LOCATE SOURCE | Eh COC CO i SWAP BESSEL : CC Easy functions of remote control. Buttons Feature PIP ON Used to activate or deactivate the PIP feature directly. SIZE Used to select a size of sub picture (Large, Small, Dowel, Double). LOCATE Used to move the sub picture counterclockwise. SOURCE Used to assign a source of sub picture. SWAP Used to interchange the main picture and the sub picture.
Listening to the Sound of the Sub Picture During the PIP feature is activating, you can listen to the sound of the sub picture. 1 Press the MENU bunion, Result: The main menu is displayed. 2 Press the 4 or ¥ button fo select PIP. Result: The options available in the PIP group are displayed 3 Press the » button. 4 Press the A or ¥ button {0 select Sound Se. Set to sub by pressing the «€or » button.
Connecting to the Audio/Video Input The “DIVED IN" connectors are used for equipment, such as a camcorder or VCR, Rear of the PDP VCR (Input) off i Decoder { Video game device Lo Video disc player The “VIDEO DUT” connectors used for the equipment with an Campsite output, such as video game devices or video disc players.
Connecting to the S-Video Input The DIVIDED and RCA connectors are used for equipment with an S-Video output, such as a camcorder or VCR. O =H fp cxf io HTH oles Tm aE El Camcorder @ To play picture and sound, both the S-VIDEO and RCA connectors must be used. Connecting to the DVD Input The “COMPONENT IN” {or (video) and “AUBIO™) connectors are used for equipment with a DVD output.
Connecting to the DVI Input The “DVI IN” (video) and “AUDIO” connectors are used for equipment with a DV| output.
Setting up Your PC Software (Windows only) The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably he different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.
Input Mode (PC/DVI) Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: . Vertical Horizontal Vertical Horizontal Standard Dot Line frequency (Hz) frequency (kHz) polarity polarity VGA 640 x 350 75 31.5 N P 85 37.8 N P 640 x 400 85 87.8 P N 720 x 400 70 315 P N 85 378 P N 640 x 480 37.9 N N 75 375 N N 85 43.3 N N SAGA 800 x 600 56 3B2 NP NE 80 37.9 P e 72 48.1 P P 75 48.
Pin Configurations PC Input Connector P6000) L(15Pim ese DVI input Connector (pippin) Pin PIN Pin Signal 1 Red (R) 1 T.M.D.8. Data Green {G} 2 T.M.0.8. Data 3 Blue (B) 3 T.M.D.S. Data Shield } 4 Grounding 4 T.MD.8. Data 5 Grounding (DDC) 5 T.M.D.S. Data i 6 fad (R) Grounding i 6 Clock (DDC) i 7 Green (GQ) Grounding | | 7 Data (DDC) | 8 Blue (B} Grounding Pod 8 Not Connected 3 9 Reserved Pod 9 T.MD.S Data Sync Grounding | 10 TEDS. Datatype 11 Grounding Pod 1" T.M.D.8. Data Shield 12 Data (DDC} 12 T.M.D.S.
Troubleshooting: Before Contacting Service Personnel Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and special number of the PDP and contact your local dealer. Check that the mains lead has been connected to a wall socket. Check that you have pressed the ON or OFF button. Check the picture contrast and brightness settings. Check the volume. Ng sound or picture Check the volume.
Technical Specifications Exterior design and product specifications are subject to change without prior notice to improve the performance of this predict. This PDP applies to Class B digital device for home use. This PDP has been registered for residential use in terms of EMI So it can be used in all areas as well as residential areas. Exterior desist performance Dimensions PPM4283 ~ 1027 x 79 x 630.5 mm ; 40.43 x 3.11 x 24.82 inches This PDP a (WxDxH) PPMBOH3 — 1204.6 x 79 x 724 mm ; 47.43 x 3.11 x 28.
~ AFTER SALES SERVICE Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
