a» PD-MONITOR (Plasma Dis Play Pane) PPM42H3 Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference.
Thank You for Choosing Samsung! Thank vou for choosing Samsung! Your sens Samsung product represents the latest in PDP technology. We designed it with easy-to-use on-screen menus, making it one of the best products in its class. We are droop to offer you a product that will provide convenient, dependable service and enjoyment for years ta come.
Important Safety In formations (UL1492) * e+ 0 Read all safety and operating instructions before operating your PDP. Keep the safely and operating instructions tor future reference. Heed all warnings on the PRP and in the operating instructions. Follow all operating and use instructions. Unplug the PRP front the wall outlet before cleaning.
Important Safety In formations (UL1492) (continued) Avoid overhead power lines. An outside antenna system should not be placed in the vicinity of overhead power lines or other electric light or power circuits or where it can fal {nto such power fines or circuits. When installing an outside antenna stern, be extremely careful to keep from touching the power lines or circuits. Contact with such fines can be fatal, Da not overload the wall outlet or extension cords.
Important Safety Instructions {UL6500) Ses 0 +» Read these instructions. Keep these instructions. Heed oll warnings. Follow all instructions, Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings, Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus {including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug.
FCC Information User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes Lhe following warning: NOTE: This equipment has been tested and found to comply wile the limits ior a Class B digital device, pursuant te Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against tularemia interference in a residential installation, This equipment generates, uses, and can radiate radio frequency energy and.
Important Warranty Information Regarding PDP Format | Viewing Wile screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to #1 the screen if your model offers this feature and constantly moving.
User Instructions Screen Image retention Do not display a still image such as on a video gear or when hooking this PDP) on the plasma display panel for more than 2 heirs a3 it can cause screen image retention. This image retention is also known as “screen bum”. To avoid such image retention, reduce the degree of brightness and contrast of this screen when displaying a still image. Cell Defect ‘The plasma display panel consists of fin cells. Although the panels are produced with more than 99.
Wiring the Mains Power Supply Plug (UK Only) IMPORTANT Nd E Tha mains lead on this equipment is supplied with a molded plug incorporating 2 fuse. The value of the fuse is indicated on the pin fae of the plug and, i it requires replacing, a fuse approved fo BSI1362 of Ihe same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement phase cover is required. il must be of the same color as lhe pin ace of the plug.
Contents 4 FOREWORD Warning! Important Safety Instructions .. Important Safety In formations (UL1492) Important Safety In formations (LLG500) FCG information Important Warranty Information Regarding PDP Format Viewing User Instructions Wiring the Mains Power Supply Plug (UK Only). ® CONNECTING AND PREPARING YOUR Display Your New Plasma Display Panel.
Contents {continued} @ USING YOUR Dis Play (CONTINUED) = Locking the Control! buttons 3 w Setting the MDC (Multiple Display 31 = Protecting the Screen Burning 32 = Selling the Multiple Screen. 33 w Displaying the PC Information 34 = Displaying the Setting Information. 34 = Setting and Displaying the Current Time 3s = Switching On and Off Automatically 36 » Turning On the Fan ..
Your New Plasma Display Panel = 3 The actual configuration on your PDP may be different, &] depending on your model Speaker Speaker | i PPMG3HI & Power Indicator i + Power On; Off Timer On; Green ~ External input selection. + Glare your sittings in the menu. Her the Main menu is displayed on screen, | the Main menu is aol operated will: source key. | MENU | Q Menu display and exit SOURCE i 1 Power OF Red Remote Control Signal Receiver i Aim the remote control towards this spt on the ~ VOL + i POP.
Your New Plasma Display Panel = The actual configuration an your PDP may be different, depending an your model. BOO BOEOTIA B60 RS232C — IN: Used for ihe MDC function when connecting PC or RE232C output of inst her PIP, = OUT : Used for the MDC function when connecting with K nut of another POP. DVINA Connect lo the ico output jack for device with DVI output. AUDIO Connect to the audio output jack on your PC or any device with DVI output.
Becoming Familiar with the Remote Control The remote control is used mainly to: ® Change sources and adjust the volume 4 Set up the PDP using the on-screen menu system PDP ON == SOUND IS ODE SELECTION — MODE host CLOCK DELAY PICTURE MODE SELECTION NUMERIC BUTTONS PICTURE STILL VOLUME INCREASE TEMPORARY SOUND SWITCH-OFF + Prose i again bunion te turn tha sound back on.
Inserting the Batteries in the Remote Control You must insert or replace the batteries in the remote control when you: + Purchase the PDP + Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by dressing the symbol downwards and then pulling firmly to remove it, 2 Insert two R03, UMA, "AAA" 1.
Installing the Display on the Wall Attachment Panel This wall mount bracket installation guide is for the following morals: WMN4230/WMNSOS/WMNE330. his installation guide may be different from ths PDP User's manual. Please refer fo the proper installation guide for your product. + [Do installation the PDP on any place other than vertical wails, + To protect the performance of the POF and prevent troubles, avoid the followings: ~ Do not install next to smoke and fire detectors.
Installing the Display on the Wall Attachment Panel 3 The exterior of the PDP may be different than the picture. {Assembly and installation of the plastic hanger is lhe same.) 1 Remove the screws from the back of the PDP. PPM4283 BOHEMIA 1 PPME3H3 T 2 Use the screws and assemble the plastic hanger. Please ask the installers to install the wall mount bracket. + Please te sure lo check if the plastic hanger is completely secured on both the left and right side after hanging the PDP an the all mount bracket.
Installing the Display Vertically You can install the PDP vertically, (PPM4253/50H3/63H3 models are available. Other manufactures da not guarantee a reliably working.) In this case, the fan automatically works. If you wish to stop the fan, position the FDP horizontally and then sel “delectable Fan” fo “0ff* in the “Function” mend. Please use the wall attachment panel exclusively when installing vertically. And you have to put left side of the PDP on top when viewed from front.
Connecting Speakers 1 Remove the screws on the rear of the PDP. 2 Hang the two “T” shaped hangers on the square holes on the rear of the FOP. PPM4283 PPM50H3 3 Tighten the PDP and the speaker bracket using the screws removed from the POP. When moving your PDP, do NOT hold the speaker connected to your PDP. It may damage the bracket clamping the speaker and your PDP together and result in a drop of your PDP and a risk of persona; damage and injury.
| Connecting Speakers (continued) Connect the speaker audio cable to the external speaker output jack on the rear of the PDP matching the and “= ends of the cable with the diagram on the PDP. | = # The speakers MUST have lo a power handling capability of 10 watts minimum {impedance 80). + When you connect the speaker wire to the external speaker out corrector, first bind the speaker wire round the fer rite core fo secure it. The fer rite cores are used to attenuate undesired signals.
Switching On and Off The mains lead is attached to the rear of your PDP. WF Ii you have purchased this PDP in the United Kingdom, refer to page 9 for further instructions on plug wining, 1 Plug the mains lead info an appropriate socket.
Selecting the Color System {video or $-Video Mode) >> Preset to the Video or S-Video mode by using Ihe SOURCE button. ¥ necessary, select the broadcasting standard which best corresponds to your viewing requirements. 1 Press the MENU bunion, Be suit: The options available in the picture group are displayed. 2 Press the » Moulton. Result: The color System is selected.
Adjusting the Picture Settings Your PDP bas several settings which allow you fo control picture quality, 1 Press the MENU nation. Result The options available in the Picture group are displayed. 2 Press the » bunion. 3 Press the A or ¥ bunion to select Adjust. Press the # bunion. Result The adjust menu is displayed, 4 Press the 4 or '¥ button to select the option (Contrast, Brightness, Sharpness, Color, Tint-SCENT only) tc be adjusted. Press the « or » bunion. Result The horizontal bar is displayed.
Adjusting the Picture Settings (PC or DVI Mode) ly, Gatorade © EIRE CLS >> Preset to the PC or DVI made by using Ihe SOURCE button, Press the MENU bunion Result: The options available in the picture group are displayed. Press the » button. Press bunion to select adjust. Press the » button. Resell: The Adjust menu is displayed. 24 Press the 4 or ¥ button to select the option (Contrast. Brightness, Sharpness) to be adjusted. Press the 4 or » bunion. Result: The horizontal bar is displayed.
Selecting the Picture Size You can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU outta. Result The options available in the Picture group are displayed. 2 Press the » button. 3 Press the A or ¥ button to select Size. Press the » bunion.
@® Freezing the Current Picture CD CBD C8) NG 5003 Yau can freeze the picture when watching a macing picture simply by pressing the “STILL” button. To return to normal viewing, press it again. 2= In the PIP mode, the main and sul pictures are stilted at the same time. Changing the Sound Mode You can select the type of special sound effect to be used when watching a given broadcast. Press the MENU bullpen. Result; The main menu is displayed. Press the A or ¥ bunion lo select sound.
_ Adjusting the Sound Settings The sound settings can be adjusted to suit your personal preferences. 1 Press the MENU button. Result The main menu is displayed. 2 Press the A or ¥ button lo serest Sound. Heelless: The optics available in the Scan group are displayed. 3 Press the » button. 4 Press the A or ¥ bullion to select Equalizer. Press lhe » button. Result: The Equalizer menu is displayed with the current option.
Extra Sound Settings ® Auto Volume Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the value every time the channel is changed. This feature lets you automatically adjust the velum of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
Adjusting the Screen Position and Scale Press the MENU button. Result The main menu is displayed. 2 Press the A or ¥ button to select Setup, Result The options available in the Setup group are displayed. 3 Press the I button. Result The Screen Adjust is selected. 4 Press the & button again. Heresy The Screen Adjust menu is displayed with the Position selected. 5 Press he » button over again.
Adjusting the Image Preferences (PC Mods) 30 1 Press the MENU tuition. Result: The main menu is displayed, 2 Press the A or ¥ bullion lo select Setup, Result: The options available in the Setup group are displayed. 3 Press the » button. Result: The Image Lock is selected. 4 Press the » bunion again. Result The Image Lock menu is displayed with the Alta Adjustment selected. § Press the » bunion aver again. Result: The screen size and frequency are autocratically reset with the Lute Adjustment displayed.
Locking the Control buttons | This feature allows you to lock the PDP so that it cannot be switched on via the front panel. It can, however, still be switched on via the remote control. Thus, by keeping the remote control away from unauthorized users. 1 Press the MENU button, Suttee The main menu is displayed. 2 Press the A or ¥ bunion fo select Setup. Result: The options available ir the Setup group are displayed. 3 Press the > button, 4 Press the 4 or ¥ bunion to select key Lock.
Protecting the Sci teen Burning You can prevent the residual image of the PDP. Press the MENU button. Result The main menu is displayed. Press the A or ¥ button lo select Setup. Result: The options available in the Setup group are displayed. Press the » button. Press the A or ¥ button to select! Burning Protection. ‘reds the » bunion, Bessel: The Burning Protection menu is displayed wile the Pixel shift selected. Press the » bunion again. Heelless: The Pixel Shift menu is displayed with the Set selected.
| Setting the Multiple Screen You can get the various display effect with many DPs. 1 Crass the MENU button Be suit: The main menu is displayed. 2 Press the & or ¥ bullion to select Setup. Result: The options avails in the setup group are displayed. 3 Press the tuition. 4 Pressie A or ¥ button to select idea Wall. 5 Press tre » bunion. Result The Viced Wall menu is displayed with the Set selected, 6 Soto on by pressing the «€ or > bunion. 7 Press the 4 or '¥ button fo select Screen Divider.
Displaying the PC Information 1 Press the MENU button. Bessel: The main menu is displayed, 2 Press tire 4 or ¥ glutton fo select setup. Result: The optics available in the Setup group are displayed 3 Press the »button. 4 Press the A or ¥ bunion to select Information. § Press the » button. Result The resolution, vertical frequency and horizontal frequency are displayed. Displaying the Setting Information You can view the setting status you select by pressing the “INFO” button on the cremate control.
Setting and Displaying the Current Time You can sel the clock so that the current time is displayed. You must lase set the time if you wish to use the automatic on or off timers. 1 Press the MENU bunion. Best: The main menu Is displayed. 2 Press the 4 or ¥ bullion to select Unction. Result: The opticians available in the Function group are displayed. 3 Press the » button 4 Press the A or ¥ button to select Time. Press the » button, Result The Tine menu is displayed with the Clock option selected.
Switching On and Off Automatically You can set the on or off time so that the PDP will: ® Switch on automatically and tune to the volume of your choice at the time you select * Switch off automatically at the time you select Press the MENU button. Result: The main menu is displayed. 2 Press the 4 or ¥ button to select Fun ct ion Result The options available in the Unction group are displayed. 3 Press the I button. 4 Press the 4 or ¥ bullion to select Time. Press the » button.
Turning On the Fan You can use the Fan if you are anxious for the PDP. Press The MENU button. Result The main menu is displayed. Press the 4 or ¥ button to select Function. Result: The options available in the Function group are displayed. Press the » button Press the & or '¥ button to select Electable Fan, Press the « or » button te change the setting {On or OLE). P= if your PDP is displayed vertically, the fan automatically works. + The message Check Fan is displayed if there is a fan problem.
Viewing the Picture In Picture (PIP) You can display a sub picture within the main picture. In this way you can monitor the vied input from any connected devices while monitoring other video input. 1 Press the MENU bullion, Result: The main menu is displayed. 2 Pressie 4 or ¥ button to select piv 3 Press the » button. Result: The PIP caption is selected. 4 Set to On by pressing the « or » bouillon for activating the PIP feature. Result: The options available in the PIP group afe displayed.
Viewing the Picture In Picture (PIP) (continued) Easy functions af cremate control. Buttons Feature PIP ON Used to activate or deactivate the PIP feature directly. 128 Size ee ake of sub picture {Large, Small, = SERF CT pI 5 LOCATE Used to move the sub picture counterclockwise. SOURCE Used to assign a source of sub picture. Swap Used to interchange the main picture and the sub ! picture. i S.8EL Used to listen the sound of the sub picture. wo.
Listening to the Sound of the Sub Picture During the PIP feature is activating, you can listen to the sound of the sub picture. 1 Press the MENU button. Bessel: The main menu is displayed. 2 Press the 4 or ¥ button fo select p12. Result The options available in the PIP group are displayed. 3 Press the » glutton. EFF S Lee MI . & EEX 4 Press the A or ¥ button 10 select Sound Se. Set to Sub by pressing the « or I button. Result: You can listen to the sound of the sub picture.
Connecting to the Audio/Video Input The “VIDEO IN" connectors are used for the equipment with an Composite Video output, such as video game devices or video disc players. Rear of the PDP VCR Ho pub re oO [ETE DvD pti B » fee | Decoder / be Video game device Video disc player The "VIDEO OUT" connectors are used for the equipment with an Composite Video input, such as a camcorder ar VCR.
Connecting to the S-Video Input The S-VICED and RCA connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Camcorder . =] B and VCR ET ssn play picture and sound, both the S-VIDEO and RGA connectors must be used. Connecting to the DVD/DTV RECEIVER Input The "COMPONENT IN" (or (video) and “AUDIO"} connectors are used for equipment with a DVD DTV RECEIVER output.
Connecting to the DVI Input The “DVI IN” {video) and “AUDIO” connectors are used for equipment with 2 DVI output, Rear of the PDP IB: AL and A Personal Computer Connecting to the RGB(PC) Input The “RGB1(PC1) IN" {or and “AUDIO” connectors are used for interfacing with your PC, Rear of the PDP
| Setting up Your PC Software (Windows only) The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. Rut even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.
Pin Configurations RGB(PC) Input Connector (pippin i DVI Input Connector i (fain) Pin RGB(PC) IN Pin Signal 1 Red (R) 1 TH MOS, Data; 2 Green (G) 2 T.M.O.S. Data ; 3 Blue (B} 3 T.A.D.8. Data Shield i 4 Grounding 4 TEDS. Data 5 Grounding (DDC) 5 TMD.S, Data | 6 Red {R) Grounding 8 Clock {DDC} i 7 Green (G) Grounding 7 Data (DDC) | 8 Blue (8) Grounding 8 Nol Connected g Reserved 9 TM.D.8. Data Sync Grounding 10 TMD. Data Ll Grounding 11 T.M.0.S. Data Shield 12 Data (DDC) 12 IDS. Metadata Horizontal syn.
| Input Mode (PC/DVI) Bath screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display dames that are supported: Resolution re iz a) LIPPMANN | PPM5O0H3 | PPMG3H3 VGA 640 x 350 70 315 379 v v v 540 x 400 85 37.9 v v v 720 x 400 70 315 640 x 480 80 315 vio vie vig 72 37.9 375 43.3 v v v SAGA | 800x600 56 352 379 vi® vi vie 22 48.1 459 53.7 v v v XGA 1024 x 768 60 484 vig v v 70 565 60.0 v I7E] vig 85 687 v v v WGA 848 x 480 8) 23.
Power Saver (PC1 mode only) This monitor has a built-in power management system called Power Saver. This power management system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time, This power management system operates with a VASE DIMS compliant video card installed in your computer. You use a software utility installed on your computer fo sef up this feature. See the table below for details.
Troubleshooting: Before Contacting Service Personnel Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the prob lent using the instructions below, note the model and serial number of the PDP and contact your focal dealer. No sound or picture Check that the mains lead has been connected to & wall socket. Check that you have pressed the ON or OFF button, Check the picture conferral and brightness settings. Check the volume.
Technical Specifications Exterior design and product specifications arc subject fo change without prior notice to improve the performance of this product. This PDP applies to Class B digital device for home use. This PDP has been registered for residential use in terms of EMI, So it can be used in all areas as well as residential areas. Dimensions HELPMATE ~ 1027 x 79 x 630.5 mm ; 40.43 x 3.11 x 24.
— AFTER SALES SERVICE ~ Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
