User's Manual
Table Of Contents
- Table Of Contents
- Before Using the Product
- Preparations
- Connecting and Using a Source Device
- Screen Setup
- 3.1 Brightness
- 3.2 Contrast
- 3.3 Sharpness
- 3.4 Eye Saver Mode
- 3.5 Game Mode
- 3.6 SAMSUNG MAGIC Bright
- 3.7 SAMSUNG MAGIC Angle (S19E310HY / S22E310HY / S22E310H / S27E310H)
- 3.8 SAMSUNG MAGIC Upscale
- 3.9 Image Size
- 3.10 HDMI Black Level
- 3.11 Response Time (S24E310HL / S27E310H)
- 3.12 H-Position & V-Position
- 3.13 Coarse
- 3.14 Fine
- Configuring Tint
- Coordinating OSD
- Setup and Reset
- INFORMATION Menu and Others
- Installing the Software
- Troubleshooting Guide
- Specifications
- Appendix
- Index
69
Setup and Reset
6
6 Setup and Reset
6.5 Key Repeat Time
Control the response rate of a button when the button is pressed.
The functions available on the monitor may vary depending on the model. Refer to the actual product.
6.5.1 Configuring Key Repeat Time
1 When the Function Key Guide appears, select [ ] by pressing [ ] button on the DOME Type JOG
Button.
Next, press the [ ] button.
2 Press [ ] button to move to SETUP&RESET and press [ ] button on the monitor.
3 Press [ ] button to move to Key Repeat Time and press [ ] button on the monitor.
The following screen will appear.
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds
only once when a button is pressed.
4 Move the focus to the desired option by pressing [ ] button on the DOME Type JOG Button.
Press [ ] button.
5 The selected option will be applied.
Off
Acceleration
Auto
Acceleration
1 sec
2 sec
No Repeat
Reset All
Eco Saving Plus
Off Timer
PC/AV Mode
Key Repeat Time
Source Detection
Power LED On
Configure the
response rate of a
button when the button
is pressed.
SETUP&RESET