Bluetooth HEADSET HS3000
Please read this manual before operating your headset, and keep it for future reference. Graphics used in this manual is for illustration purposes. The actual products may vary. Copyright Copyright © 2010 Samsung Electronics This user manual is protected under international copyright laws.
Please read all Safety precautions before using your headset to ensure safe and proper use. Safety precautions •• When using your headset while driving, follow local regulations in the region you are in. •• Never disassemble or modify your headset for any reason. Doing this may cause the headset to malfunction or become combustible. Bring the headset to an authorised service centre to repair it. •• Keep your device and all accessories out of the reach of small children or animals.
Charging the headset This headset has a rechargeable internal battery which is non-removable. Ensure that you fully charge the battery before using the headset for the first time. 1 Plug the small end of the travel adapter into the charger jack. 2 Plug the large end of the travel adapter into a power outlet. During charging, the indicator light will turn red. If charging does not begin, unplug the travel adapter and plug it in again. 3 When the headset is fully charged, the indicator light changes to blue.
Checking the battery level At the same time, press and hold the Volume down button and the Talk button. Depending on the battery level, the indicator light flashes 5 times in one of the following colors: Battery level Indicator light color Above 80% Blue 80 ~20% Violet Below 20% Red When the battery power is low The headset beeps and the indicator light flashes red. Recharge the battery. If the headset powers off during a call, the call will be automatically transferred to the phone.
Using your headset This section explains how to turn the headset on, pair and connect to the phone, and use various functions. •• Activated functions and features may differ depending on the phone type. •• Some devices, especially those that are not tested or approved by Bluetooth SIG, may be incompatible with your headset. To ensure you get the best performance from your headset.
Using voice prompts Voice prompts will inform you about the current status of the headset and usage instructions. To turn voice prompts on With the headset turned on, press and hold the Volume up button for 4 seconds. To turn voice prompts off With the headset turned on, press and hold the Volume down button for 4 seconds. To select languages With the headset turned on, press and hold the Volume up and down button simultaneously.
1 Enter Pairing mode. With the headset turned on, press and hold the Talk button until the indicator light turns blue and stays lit after blinking. When you turn on the headset for the first time, it automatically enters Pairing mode. 2 Activate the Bluetooth feature on your phone and search for the headset (see your phone’s user manual). 3 Select the headset (HS3000) from the list of devices found by your phone.
1 Connect with the first Bluetooth phone. 2 Activate Multi-point feature. ••Enter Pairing mode and press and hold the Volume up button. 3 Activate the Bluetooth feature on the second Bluetooth phone and search for the headset (see your phone’s user manual). 4 Select the headset (HS3000) from the list of devices found by the second Bluetooth phone. 5If requested, enter the Bluetooth PIN 0000 (4 zeros) to connect the headset to the second Bluetooth phone.
each time you turn it on. This feature may be unavailable on some phones. If the headset does not automatically attempt to reconnect, Press the Talk button or use the Bluetooth menu on your phone. If the Multi-point feature is activated, your headset will attempt to reconnect to the two most recently connected phones. Pairing via the Active pairing feature With the Active pairing feature, your headset can automatically search for a Bluetooth phone and try to make a connection with it.
Using call functions ••Available call functions may vary depending on the phone. •• * These functions are available only on the Hands-Free profile. For more information, see your phone’s user manual. Making a call Redialing the latest Number dialed To redial the latest number of the primary phone, press and hold the Talk button. To redial the latest number of the secondary phone, press the Talk button twice. For some phones, pressing the Talk button opens the call log list.
Ending a call Press the Talk button to end a call. Rejecting a call* Press and hold the Talk button to reject a call when a call comes in. Using options during a call You can use the following functions during the call. Adjusting the volume Press the Volume up or down button to adjust the volume. Muting the microphone Press and hold the Volume up or down button to turn the microphone off so that the person with whom you are speaking cannot hear you.
Answering a second call* •• Press the Talk button to end the first call and answer a second call from the same phone when you hear call waiting tones. •• Press and hold the Talk button to place the first call on hold and answer a second call of the same phone when you hear call waiting tones. •• To switch between the current call and the held call, press and hold the Talk button.
3 Search for, pair, and connect with the music device you want. (see your music device’s user manual) 4 Connect with the first paired phone. 5 When the phone and the device are successfully connected with the headset, you can make or answer a call while you are listening to music. If your headset is already connected with the Bluetooth phone using A2DP(Advanced Audio Distribution Profile), you cannot connect with another music device.
Appendix Frequently asked questions Will my headset work with laptops, PCs, and PDAs? Your headset will work with Bluetooth devices that support same headset’s Bluetooth profiles. Why do I hear static or interference while on a call? Appliances such as cordless phones and wireless networking equipment may cause interference, which usually sounds like static. To reduce any interference, keep the headset away from other devices that use or produce radio waves.
easily monitored by third parties because Bluetooth wireless signals are significantly lower in radio frequency power than those produced by a typical mobile phone. Why do I hear an echo while on a call? Adjust the headset volume, or move to another area and try again. How do I clean my headset? Wipe it with a soft dry cloth. The headset does not fully charge. The headset and the travel adapter may not have been connected properly.
Certification and Safety approvals FCC FCC ID: A3LHS3000 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
UL certified travel adapter The travel adapter for this headset has met applicable UL safety requirements. Please adhere to the following safety instructions per UL guidelines. FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE. IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS. DANGER – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.
STANDARD LIMITED WARRANTY What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, LLC (“SAMSUNG”) warrants to the original purchaser (“Purchaser”) that SAMSUNG’s phones and accessories (“Products”) are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase and continuing for the following specified period of time after that date: Phone 1 Year Batteries 1 Year Case/Pouch/Holster 90 Days Other Phone Accessories 1 Year What i
(d) any plastic surfaces or other externally exposed parts that are scratched or damaged due to normal use; (e) malfunctions resulting from the use of Product in conjunction or connection with accessories, products, or ancillary/peripheral equipment not furnished or approved by SAMSUNG; (f) defects or damage from improper testing, operation, maintenance, installation, service, or adjustment not furnished or approved by SAMSUNG; (g) defects or damage from external causes such as collision with an object, or
return Product to an authorized phone service facility in an adequate container for shipping, accompanied by Purchaser’s sales receipt or comparable substitute proof of sale showing the original date of purchase, the serial number of Product and the sellers’ name and address. To obtain assistance on where to deliver the Product, call Samsung Customer Care at 1-888-987-4357. Upon receipt, SAMSUNG will promptly repair or replace the defective Product.
• WARRANTIES OF TITLE OR NON-INFRINGEMENT; • DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT; • THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR • COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT.
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER’S EXCLUSIVE REMEDY.
This Limited Warranty allocates risk of Product failure between Purchaser and SAMSUNG, and SAMSUNG’s Product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty. The agents, employees, distributors, and dealers of SAMSUNG are not authorized to make modifications to this Limited Warranty, or make additional warranties binding on SAMSUNG.
www.samsungmobileusa.com Printed in China GH68-XXXXXA NA. 12/2010. Draft.
