EO-BN920 User Manual English (EU). 09/2015. Rev.1.0 www.samsung.
Table of Contents Read me first Appendix 19 21 Getting started 4 5 6 7 8 Package contents Device layout Charging the battery Turning the headset on and off Notification light identification Connecting via Bluetooth 9 10 11 12 Bluetooth Connecting to other devices Connecting additional devices Reconnecting or disconnecting the devices Using the headset 13 14 15 17 18 Wearing the headset Wearing and connecting the headset Using the headset Using the ultra high quality Bluetooth (UHQ-BT) feature Sharing
Read me first Please read this manual before using the device to ensure safe and proper use. • Images may differ in appearance from the actual product. Content is subject to change without prior notice. • Before using the headset, make sure it is compatible with your device.
Getting started Package contents Check the product box for the following items: • Headset • Quick start guide • The items supplied with the device and any available accessories may vary depending on the region or service provider. • The supplied items are designed only for this device and may not be compatible with other devices. • Appearances and specifications are subject to change without prior notice. • You can purchase additional accessories from your local Samsung retailer.
Getting started Device layout Charger port Neckband (Vibration area) Notification light Microphone Microphone Magnet sensor Volume (+) button Volume (-) button Multifunction/Talk button Power switch Right earphone Left earphone Buttons and functions Name Function • Slide to turn the headset on or off. Power switch • Slide to the right and hold for approximately three seconds to enter Bluetooth pairing mode. • Press to answer or end calls.
Getting started Name Function • Press to adjust the volume during a call or media playback. • Press and hold the Volume (-) button to skip to the next file during media playback. Volume buttons • Press and hold the Volume (+) button to skip to the previous file during media playback. • Press and hold the Volume buttons (+ and -) simultaneously for about a second to turn the vibration feature on or off.
Getting started Connecting the charger improperly may cause serious damage to the headset. Any damage caused by misuse is not covered by the warranty. • You can charge the headset using the charger (sold separately). • The headset can be used while it is charging, but it may take longer to fully charge the battery. • While charging, the headset may heat up. This is normal and should not affect the headset’s lifespan or performance. If the battery gets hotter than usual, the charger may stop charging.
Getting started Notification light identification The notification light alerts you to the headset’s status.
Connecting via Bluetooth Bluetooth About Bluetooth Bluetooth is a wireless technology standard that uses a 2.4 GHz frequency to connect to various devices over short distances. It can connect and exchange data with other Bluetooth enabled devices, such as mobile devices, computers, printers, and other digital home appliances, without connecting via cables. Notices for using Bluetooth • To avoid problems when connecting your headset to another device, place the devices close to each other.
Connecting via Bluetooth Connecting to other devices This headset is compatible with Bluetooth-enabled devices. 1 Headset Slide the Power switch to the right and hold it for approximately three seconds to enter Bluetooth pairing mode. When you turn on the headset for the first time, it automatically enters Bluetooth pairing mode. 2 3 Other device Activate the Bluetooth feature and search for Bluetooth devices. For more information, refer to the other device’s user manual.
Connecting via Bluetooth Connecting additional devices The headset can connect to up to two Bluetooth-enabled devices at the same time. When you connect the headset to two devices, the last device you connect is recognised as the primary device. The other device is recognised as the secondary device. 1 2 Connect the headset to a device via Bluetooth. Slide the Power switch to the right and hold it for approximately three seconds to enter Bluetooth pairing mode. The first device will be disconnected.
Connecting via Bluetooth Reconnecting or disconnecting the devices Reconnecting the devices If the Bluetooth connection ends due to the distance between the devices, bring the devices closer together within a certain period of time. The devices will automatically reconnect. If the Bluetooth connection ends because of a device malfunction, access the Bluetooth menu on the connected device to pair them again.
Using the headset Wearing the headset The headset contains magnets in its earbuds. The American Heart Association (US) and the Medicines and Healthcare Products Regulatory Agency (UK) both warn that magnets can affect the operation of implanted pacemakers, cardioverters, defibrillators, insulin pumps or other electro medical devices (collectively, “Medical Device”) within the range of 15 cm (6 inches).
Using the headset Wearing and connecting the headset Wearing the headset Insert the earphones into your ears or wear the headset around your neck while the earphones are not connected to each other. Connecting the earphones Connect the earphones to each other using the built-in magnets.
Using the headset The magnetic sensor may not work properly if the earphones are not connected properly. Using the headset Various features are available when the headset is connected to another device. The following descriptions are based on a Samsung mobile device running Android 5.0. Some features may not be available depending on the connected device. Calling features Answering a call When a call comes in while you are wearing the headset, the headset will beep and vibrate.
Using the headset Adjusting the volume Press the Volume button. Switching sound output Use the connected device’s call features to switch call audio between the headset and the device. Ending a call Press the Talk button or connect the earphones. Playing multimedia files Control media playback, such as music and videos, using the Multifunction button. Playing and pausing a multimedia file Press the Multifunction button.
Using the headset Launching S Voice Press and hold the Multifunction button for one second. S Voice will launch on the connected device. This feature is available only with Samsung mobile devices supporting S Voice. Using Samsung Level On the connected device, download the Samsung Level app from Google Play Store or Galaxy Apps. With the app, you can check the remaining battery power and adjust the volume.
Using the headset Sharing audio via Sound with Me Share audio that you are listening to on your headset with other headsets that support the Sound with Me feature. Ensure that the headset that you want to share audio with is turned on. • Your headset must be connected to a mobile device, such as a smartphone or tablet. If your headset is connected to more than one mobile device, you cannot share audio with other headsets.
Appendix Troubleshooting Before contacting a Samsung Service Centre, please attempt the following solutions. Your headset does not turn on When the battery is completely discharged, your headset will not turn on. Charge the battery completely before turning on the headset. The battery does not charge properly (For Samsung-approved chargers) Ensure that the charger is connected properly. If the problem is still not resolved, contact a Samsung Service Centre.
Appendix Bluetooth connection is often disconnected • If there are obstacles between the devices, the operating distance may be reduced. • Ensure that your headset and the other Bluetooth device are within the maximum Bluetooth range (10 m). • When using the headset with other Bluetooth devices, the connection may be affected by electromagnetic waves. Use the headset in environments with fewer wireless devices present. You cannot hear others speaking • Adjust the device volume.
Appendix The battery depletes faster than when first purchased • When you expose the headset or the battery to very cold or very hot temperatures, the useful charge may be reduced. • The battery is consumable and the useful charge will get shorter over time. Removing the battery • To remove the battery, you must visit an authorised service centre with the provided instructions. • For your safety, you must not attempt to remove the battery.
Declaration of Conformity Product details For the following Product : Bluetooth Stereo Headset Model(s) : EO-BN920 Declaration & Applicable standards We hereby declare, that the product above is in compliance with the essential requirements of the R&TTE Directive (1999/5/EC) by application of: SAFETY SAR EMC RADIO and the Directive (2011/65/EU) on the restriction of the use of certain hazardous substances in electrical and electronic equipment by application of EN 50581:2012.
Copyright Copyright © 2015 Samsung Electronics This manual is protected under international copyright laws. No part of this manual may be reproduced, distributed, translated, or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or storing in any information storage and retrieval system, without the prior written permission of Samsung Electronics. Trademarks • SAMSUNG and the SAMSUNG logo are registered trademarks of Samsung Electronics.
