7. Time Control 1. Click Time of the main icons and the Time Control screen appears. Installing Stand Kit Connecting Your Monitor Multiple Display Control (MDC) Info Grid shows some basic information necessary to Time Control. 1) Current Time - Set the current time for the selected display (PC Time) - To change the current time, first change the PC Time.
Info Grid shows some basic information necessary to PIP Size Control. 1) Power - Shows the power status of the current display. Installing Stand Kit Connecting Your Monitor Multiple Display Control (MDC) 2) PIP Size - Shows the current PIP Size of the display in use. 3) PIP Source - Shows the current PIP Source of the display in use. 4) When you click PIP, the PIP Size tabs first appear.
9. Settings Control - Picture 1. Click Settings of the main icons and the Settings Control screen appears. Installing Stand Kit Connecting Your Monitor Multiple Display Control (MDC) Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is displayed in the slide. When Select All is selected, the default value (50) returns. If you change the value in the Settings Control screen, it switches to CUSTOM mode automatically.
Installing Stand Kit Connecting Your Monitor Multiple Display Control (MDC) Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is displayed in the slide. When Select All is selected, the default value (50) returns. If you change the value in the Settings Control screen, it switches to CUSTOM mode automatically. 1) Picture RGB - Available only for RGB 1, RGB 2, RGB 3.
9. Settings Control – Image Lock 1 1. Click Settings of the main icons and the Settings Control screen appears. Installing Stand Kit Connecting Your Monitor Multiple Display Control (MDC) Info Grid shows some basic information necessary to Settings Control. 1) Image Lock 1 - Available only for RGB 1, RGB 2, RGB 3. 2) Coarse - Adjusts Coarse of the selected display. 3) Fine - Adjusts Fine of the selected display. 4) Position - Adjusts Position of the selected display.
10. Diagnostics 1. Click Diagnostics of the main icons and the Settings Control screen appears. Installing Stand Kit Connecting Your Monitor Multiple Display Control (MDC) 1) SET ID - Shows the ID of the currently connected display. 2) Power Status - Shows the power status of the current display. 3) Lamp Time - Shows the LCD Lamp On time of the currently connected display. 11. Troubleshooting 1.
12. Settings Value Display In Multiple Display Mode Installing Stand Kit Connecting Your Monitor Multiple Display Control (MDC) When there are more than one displays connected, the settings values are displayed as follows. 1. No selection: Displays the Factory Default Value. 2. Selected one display: Fetches and displays the settings value for the selected display. 3.
Introduction remote control buttons The control button configuration may vary slightly depending on the monitor model. User Controls On-Screen Display Monitor Buttons | Remote Control Buttons | Monitor Buttons | For more information about screen adjustment, refer to On-Screen Display. 1. Auto button Press to self-adjust to the incoming PC signal. The values of fine,coarse and position are adjusted automatically.
6. Number buttons 7. PIP button 8. PIP Size button 9. P.Size button User Controls On-Screen Display 10. Still button 11. Display button 12. Sleep button 13. Menu button 14. Exit button 15. Swap button 16. Location button 1. Power button Use this button to turn the monitor on and off. 2. Auto button Press to self-adjust to the incoming PC signal. The values of fine,coarse and position are adjusted automatically.
Press to stop the action during a particular scene. Press again to resume normal video. User Controls On-Screen Display 11. Display button Shows a Resolution and Frequency on the upper center of the screen. 12. Sleep button Press to select a preset time interval for automatic shutoff. 13. Menu button When screen adjustment menu is off: Use this button to open the OSD and activate a highlighted menu item. 14. Exit button Press to exit the menu. 15.
OSD Functions Screen Adjustment Animation Clips User Controls On-Screen Display Characters and icons become highlighted in blue during adjustment for each menu. PC Control | Video Control | Audio Control | Function Control 1. PC Control For detailed information on Screen Adjustment in the PC mode, refer to PC mode Screen Adjustment Animation Clips. Brightness Adjust Brightness. Contrast Adjust Contrast. Color Temperature The tone of color can be changed from redish white to bluish white.
2. Video Control User Controls On-Screen Display For detailed information on Screen Adjustment in the Video mode, refer to Video mode Screen Adjustment Animation Clips. You can use this function only if your screen mode is Video 1 or Video 2 or Component. Brightness Adjust Brightness. Contrast Adjusting Contrast. Sharpness Use to adjust the difference between the lightest and darkest areas on the display. Color • Color : Use to adjust the lightness/darkness on the display.
4. Function Control For detailed information on Screen Adjustment in the Function mode, refer to Function mode Screen Adjustment Animation Clips. User Controls On-Screen Display ID (MDC Program) Assigns individual ID to the SET. 1) ID Setup : Assigning distinctive IDs to the SET. 2) ID Input : Use to select the transmitter functions of the individual SET. Only the SET whose ID corresponds to the transmitter setting becomes activated.
User Controls On-Screen Display BNC Source Select an input source from the BNC connection. 1) RGB 3 2) Component OSD 1) Language : You can choose one of 10 languages. 2) Position : Move the OSD Window to the vertical and horizontal direction. 3) Halftone : Change the opaqueness of the background of the OSD. 4) Duration : The number of seconds that the OSD will remain visible before disappearing. Information Display current display mode.
Check the following items yourself before calling for service. Contact the service center for problems that you cannot solve by yourself. Check before calling for service Problems and Solutions Q&A Self-Test Feature Check | Video mode not supported | Dot Acceptable | Maintenance and Cleaning | Symptoms & Recommended Actions - Self-Test Feature Check Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. 1.
- Dot Acceptable Check before calling for service Problems and Solutions Q&A TFT LCD panel manufactured by using advanced semiconductor technology with precision of 99.999% above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness. The number of TFT LCD pixels : 2,949,120 - Maintenance and Cleaning 1.
The following table lists possible problems and their solutions. Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the warranty card, the phone number on the Information section or contact your dealer. Check before calling for service Problems and Solutions Q&A Installation | Screen | Audio | Remote Control 1.
Check before calling for service Problems and Solutions Q&A blinks every 0.5 or 1 seconds 3. Problems related to Audio Problems related to audio signals and their solutions are listed below. Problems No sound Solutions z Ensure that the audio cable is firmly connected to both the audio-in port on your monitor and the audio-out port on your sound card. (Refer to the Connecting Your Monitor) z Check the volume level. Sound level is too low. z Check the volume level.
Frequently asked questions are summarized here for your reference. Question Check before calling for service Problems and Solutions Q&A How can I change the frequency? Answer Frequency can be changed by reconfiguring the video card. Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) How can I adjust the resolution? Windows XP: Reset resolution by clicking Control Panel Theme Display Settings.
Design and specifications are subject to change without prior notice. General General PowerSaver Preset Timing Modes Model Name SyncMaster 403T LCD Panel Size 40.02 inch (Diagonal) / 39.6 inch (Diagonal) Display area 871.68 (H) x 523.008 (V) Pixel Pitch 0.681 (H) x 0.
Audio Characteristics General Audio Input 1 RCA Jack Red(R) White(L), 0.5Vrms (-9dB) PowerSaver Preset Timing Modes Audio Input 2 RCA Jack Red(R) White(L), 0.5Vrms (-9dB) PC Audio Input 3.5ØStereo Jack, 0.5Vrms (-9dB) Frequency RF: 80Hz ~ 15kHz (at -3dB) Response A/V: 80Hz ~ 20kHz (at -3dB) Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings.
General PowerSaver Preset Timing Modes This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you move the computer's mouse or press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. General PowerSaver Preset Timing Modes Table 1. Preset Timing Modes Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) MAC, 640 x 480 35.000 66.700 30.
Service Center Terms Regulatory Natural Color Authority U.S.A. : Samsung Computer Products Customer Service 400 Valley Road, Suite 201, Mt. Arlington, NJ 07856 Tel. : (973)601-6000, 1-800-SAMSUNG (1-800-726-7864) Fax. : (973)601-6001 http://www.samsungusa.com/monitor/ BRAZIL : Samsung Eletronica da Amazonia Ltda. R. Prof. Manoelito de Ornellas, 303, Terro B Chacara Sto. Antonio, CEP : 04719-040 Sao Paulo, SP SAC : 0800 124 421 http://www.samsung.com.br/ CANADA : Samsung Electronics Canada Inc.
Service Center Terms Regulatory Natural Color Authority United Kingdom : Samsung Electronics (UK) Ltd. Samsung House, 225 Hook Rise South Surbiton, Surrey KT6 7LD Tel. : (0208) 391 0168 Fax. : (0208) 397 9949 < European Service Center & National Service > Stafford Park 12 Telford, Shropshire, TF3 3BJ Tel. : (0870) 242 0303 Fax. : (01952) 292 033 http://samsungservice.co.
Service Center Terms Regulatory Natural Color Authority NETHERLANDS/BELGIUM/LUXEMBOURG : Samsung Electronics Benelux B. V. Fleminglaan 12 2289 CP Rijiswijk, NEDERLANDS Service and informatielijn ; Belgium :0800-95214, http://www.samsung.be/ Netherlands : 0800-2295214, http://www.samsung.nl/ CHILE : SONDA S.A. Teatinos 550, Santiago Centro, Santiago, Chile Fono: 56-2-5605000 Fax: 56-2-5605353 56-2-800200211 http://www.sonda.com/ http://www.samsung.cl/ MEXICO : Samsung Electronics Mexico S.A. de C.V.
Sync Signal Service Center Terms Regulatory Natural Color Authority Sync (Synchronized) Signals refer to the standard signals that are required to display desired colors on the monitor. They are divided into Vertical and Horizontal Sync Signals. These signals display normal color images by the set resolution and frequency. Types of Sync Signals Separate This is a scheme of transmitting individual vertical sync signals to the monitor.
FCC Information | IC Compliance Notice | MPR II Compliance | European Notice (Europe only) | PCT Notice | VCCI | Service Center Terms Regulatory Natural Color Authority FCC Information User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes the following warning: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
This monitor complies with SWEDAC(MPR II) recommendations for reduced electric and magnetic fields. Service Center Terms Regulatory Natural Color Authority European Notice (Europe only) Products with the CE marking comply with the EMC Directive(89/336/EEC), (92/31/EEC), (93/68/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
Natural Color Software Program Service Center Terms Regulatory Natural Color Authority One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor. The Natural Color S/W is the very solution for this problem.
Information in this document is subject to change without notice. © 2003 Samsung Electronics Co., Ltd. All rights reserved. Service Center Terms Regulatory Natural Color Authority Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
