Installing Stand Kit Only the supplied bolts should be used. Samsung Electronics will not be responsible for damages caused by using a base other than those specified. 1. Installing the Semi Stand Left stand Right stand 1. A 'Cover-Protector' is used to protect the hole at the bottom of the monitor, where the stand is inserted.
Installing Stand Kit 2. Installing Stand Kit (sold separately) 1. A 'Cover-Protector' is used to protect the hole at the bottom of the monitor, where the stand is inserted. Be sure to remove the 'Cover-Protector' when attaching the provided Semi Stand or stand kit (sold separately) and cover the hole using the 'Cover-Hole' when attaching the wall mount kit. 2. Make sure you put the parts in the right direction and in the right place. (M5 × 4) 3. Put the stand into the hole at the bottom of the monitor. 4.
Installing Stand Kit Only the supplied bolts should be used. Samsung Electronics will not be responsible for damages caused by using a base other than those specified. 1. Installing the Semi Stand Left stand Right stand 1. A 'Cover-Protector' is used to protect the hole at the bottom of the monitor, where the stand is inserted.
Installing Stand Kit 2. Installing Stand Kit (sold separately) 1. A 'Cover-Protector' is used to protect the hole at the bottom of the monitor, where the stand is inserted. Be sure to remove the 'Cover-Protector' when attaching the provided Semi Stand or stand kit (sold separately) and cover the hole using the 'Cover-Hole' when attaching the wall mount kit. 2. Make sure you put the parts in the right direction and in the right place. (M5 × 4) 3. Put the stand into the hole at the bottom of the monitor. 4.
Connecting Your Monitor AV input devices like DVDs, VCRs or Camcorders as well as your computer may be connected to the monitor. For detailed information on connecting AV input devices, refer to User Controls under Adjusting Your Monitor. Connecting to a Computer | Connecting to a VCR | Connecting to a DVD Player | Connecting a Camcorder Connecting DTV Set Top Box | Connecting Speakers | Connecting to an Audio System 1. Connecting to a Computer 1.
Connecting Your Monitor 2. Connecting to a VCR 1. AV input devices like VCRs or Camcorders are connected to the S-Video Connection Terminal or CVBS Video Connection Terminal of the monitor using the S-VHS or BNC cable. S-VHS or BNC cable is optional. 2. Connect the Audio (L) and Audio (R) terminals of a VCR or Camcorders to the monitor's CVBS, SVideo Audio Connection Terminal using audio cables. 3.
Connecting Your Monitor 4. Connecting a Camcorder 1. Locate the A/V output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the CVBS, S-Video Audio Connection Terminal on the Monitor. 2. Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the CVBS Video Connection Terminal on the Monitor. 3.
Connecting Your Monitor 1. Connect the Left, Right audio speaker cable to the external speaker output jacks on the rear of the Monitor, matching the red "+" and the black "-" ends of the cable with the diagram on the Monitor. 7. Connecting to an Audio System 1. Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and the Audio Line-out Connection Terminal on the Monitor.
Connecting Your Monitor AV-inputenheder som DVD'er, videoafspillere eller Camcordere samt computeren kan tilsluttes skærmen. Yderligere oplysninger om tilslutning af AV-inputenheder finder du under Brugerkontrolelementer under Justering af skærmen. 1. Tilslutning til en computer 1. Forbind skærmens strømkabel til strømstikket på skærmens bagpanel. Tænd for tænd/sluk-knappen. 2. Tilslut signalkablet til PC-videotilslutningsterminal på computeren.
Connecting Your Monitor 2. Tilslutning til en videobåndoptager 1. AV-inputenheder som videoafspillere eller Camcordere er tilsluttet S-videotilslutningsterminal or CVBS-videotilslutningsterminal til skærmen ved hjælp af S-VHS- eller BNC-kablet. S-VHS- eller BNC-kablet er valgfrit. 2. Tilslut lyd- (L) og lyd (R)-terminalerne til en videoafspiller eller Camcorder til skærmens L- og Rlydinputterminaler ved hjælp af lydkabler. 3.
Connecting Your Monitor 4. Tilslutning til en camcorder 1. Find AV-udgangsstikkene på camcorderen. De er normalt placeret bag på eller på siden af camcorderen. Tilslut et sæt audiokabler mellem AUDIO OUTPUT-stikkene på camcorderen og CVBS-, Svideoaudiotilslutningsterminal (input) på skærmen. 2. Tilslut et videokabel mellem VIDEO OUTPUT-stikket på camcorderen og VIDEO-stikket på skærmen. 3. Vælg Video 1, der er tilsluttet en Camcorderen, med kildeknappen foran på skærmen. 4.
Connecting Your Monitor 6. Tilslutning af højttalere 1. Tilslut venstre og højre højttalerkabel til de eksterne udgangsstik til højttalerne bag på skærmen. Sørg for, at kabelenderne, henholdsvis den røde "+" og den sorte "-", passer til diagrammet på skærmen. 7. Tilslutning til et audiosystem 1. Tilslut et sæt audiokabler mellem stikkene AUX L, R på lydsystemet og stikkene Audiotilslutningsterminal til udgående linje (output) på skærmen.
Multiple Display Control (MDC) 1. Introduction 2. Install 3. Beginning : Main Screen | Port Setting | Port Change 4. Power Control 5. Input Source Control 6. Image Size Control : RGB 1, 2, 3 | Video 1, 2, Component 7. Time Control 8. PIP Control : PIP Size | PIP Source 9. Settings Control : Picture | Picture RGB | Audio | Image Lock 1 | Image Lock 2 10. Diagnostics 11. Troubleshooting 12. Settings Value Display In Multiple Display Mode 1.
Multiple Display Control (MDC) 2. Install 1. PC Requirements (recommended) : Pentium II, 64M or greater RAM, 800 x 600, 256 color or higher PC display. 2. OS: Windows 95, Windows 98, Windows ME, Windows 2000, Windows XP and XP Professional Minimum system requirement for MDC Program - Windows 98/ME/2000/XP : Support both English and Others version. 3. Click SETUP.EXE, and the following screen appears and the basic files for setup are copied.
Multiple Display Control (MDC) 5. Select the folder in which you want to install the program and then click Install button. Now installationation is completed.
Multiple Display Control (MDC) 3. Beginning – Main Screen Click Start > Program > Multiple Display Control to start the program. Select a set to see the volume of the selected set within the slider. Main Icons Control Tools Select Button Remocon Display Selection Title Info Grid Comm. Status 1. Use the main icons to switch into each screen. 2. Click Select all or Clear to select or clear all displays. 3. Select a display from Display Selection. 4.
Multiple Display Control (MDC) 3. Beginning – Port Setting 1. The Multiple Display Control uses only “Com1.” The Control does not function with any other ports. 2. To check which port is installed, go to Control Panel > System > Hardware > Device Manager > Ports. 3. If the port installed is Com2, change to Com1 in Windows 2000 (See next chapter). For all the other operating systems, the change can be made from the BIOS Setup of your PC. 4. Use Exit to end the program.
Multiple Display Control (MDC) 4. Power Control 1. Click Power Control of the main icons and the Power Control screen appears. Info Grid shows some basic information necessary to Power Control. 1) Power Status 2) Input Source 3) Aspect Ratio 4) On Timer Status 5) Off Timer Status 2. Use the Select All button or Check Box to choose a display to control. Power Control allows controlling some of the functions of the selected display. 1) Power On/Off - Turns the power of the selected display On/Off.
Multiple Display Control (MDC) - Controls the volume level of the selected display. It receives the volume value of the selected display from the sets and displays it in the slider. (When you cancel the selection or choose Select All, the value returns to the default value 10) 3) Mute On/Off - Turns the mute of the selected display On/Off . When selecting one set at a time, if the selected set is already set to MUTE, you must mark the MUTE display.
Multiple Display Control (MDC) Info Grid shows some basic information necessary to Image Size Control. 1) Power - Shows the power status of the current display. 2) Aspect - Shows the current Image Size of the display in use. 3) Input Source - Shows the current Input Source of the display in use. 4) Info Grid displays only the displays whose Input Source is RGB 1, 2, 3. 5) When you click Image Size, the RGB 1, 2, 3 tabs first appear.
Multiple Display Control (MDC) 6. Image Size Control - Video 1, 2, Component 1. Click Image Size of the main icons and the Image Size control screen appears. Info Grid shows some basic information necessary to Image Size Control. 1) Click the Video 1, 2, Component tab to adjust Image Size for Video 1, 2, Component. Click Select All or use Check Box to select a display to control. 2) Info Grid displays only the display having Video 1, 2, Component as input source.
Multiple Display Control (MDC) Current time is equivalent to PC time, If the Current time is not correct set the PC time The shown current time will not be applien before pressing Apply button. 2) On Time Setup - Set the hour, minute, AM/PM of On Time, Status, Source, volume of the selected display. 3) Off Time Setup - Set the hour, minute, and AM/PM, Status for Off Timer of the selected display. 4) Shows the On Timer settings. 5) Shows the Off Timer settings.
Multiple Display Control (MDC) 8. PIP Control - PIP Source 1. Click PIP of the main icons and the PIP control screen appears. Info Grid shows some basic information necessary to PIP Source Control. 1) Click the PIP Source tab to adjust PIP Source. Click Select All or use Check Box to select a display to control. • RGB 1 : Changes the source of the PIP of the selected display to RGB 1. • RGB 2 : Changes the source of the PIP of the selected display to RGB 2.
Multiple Display Control (MDC) Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is displayed in the slide. When Select All is selected, the default value (50) returns. 1) Picture - Available only for VIDEO 1, VIDEO 2, COMPONENT. 2) Contrast - Adjusts Contrast of the selected display. 3) Brightness - Adjusts Brightness of the selected display. 4) Sharpness - Adjusts Sharpness of the selected display.
Multiple Display Control (MDC) 9. Settings Control - Audio 1. Click Settings of the main icons and the Settings Control screen appears. Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is displayed in the slide. When Select All is selected, the default value (50) returns. 1) Audio - Controls audio settings for all input sources. 2) Treble - Adjusts Treble of the selected display.
Multiple Display Control (MDC) 9. Settings Control – Image Lock 1 1. Click Settings of the main icons and the Settings Control screen appears. Info Grid shows some basic information necessary to Settings Control. 1) Image Lock 1 - Available only for RGB 1, RGB 3. 2) Coarse - Adjusts Coarse of the selected display. 3) Fine - Adjusts Fine of the selected display. 4) Position - Adjusts Position of the selected display. 5) Auto Adjustment - Self-Adjust to the incoming PC signal.
Multiple Display Control (MDC) 9. Settings Control – Image Lock 2 1. Click Settings of the main icons and the Settings Control screen appears. Info Grid shows some basic information necessary to Settings Control. 1) Image Lock 2 - Available only for VIDEO 1, VIDEO 2. 2) Zoom - Magnifies the size of the picture on screen. 3) Panning - Moves the position of the magnified image on the screen either vertically or horizontally.
