Specifications

ManualsBrandsSamsung Electronics ManualsElectronicsRF MODULE

1. Functional Description

CBAQ210A is the module for BLE at embedded and Digital appliance applications. It is based on

Airoha AB1611 solution which comprises single chip with integrated BLE 5.0

2. Features

 BLE - compliant

 Supports Adaptive Frequency Hopping

 On chip support for serial peripheral interface (master and slave modes)

 Dimension : 22 mm x 10 mm / H max: 3.5 mm

 Interface : UART Interface

 RoHS compliant

 Supply Voltage : VCC 3.3V (1.9V~3.6V)

 Power Consumption : 100mW

3. Application

 Handheld BLE appliance

Summary of content (6 pages)

PAGE 1
. Functional Description CBAQ210A is the module for BLE at embedded and Digital appliance applications. It is based on Airoha AB1611 solution which comprises single chip with integrated BLE 5.0 2. Features  BLE - compliant  Supports Adaptive Frequency Hopping  On chip support for serial peripheral interface (master and slave modes)  Dimension : 22 mm x 10 mm / H max: 3.5 mm  Interface : UART Interface  RoHS compliant  Supply Voltage : VCC 3.3V (1.9V~3.
PAGE 2
5. Electrical Characteristics 1) Absolute Maximum Ratings Symbol Parameter VDD_3V3(VBAT) DC supply Min. Max. Unit 3.6V V voltage 2) Power Consumption Parameter Conditions Min. Nom. Max. Unit Tx current @9.5dBm TX Power 27.9 mA 6. RF Specifications 1) Transmitter Item Min. Typ. Max. 8.
PAGE 3
2) Receiver Item Min. Typ. Max. -90 Sensitivity dBm -10 Maximum input level Unit dBm Co-Channel interference, C/I 21 dB Adjacent channel F = F0+1MHz 15 dB interference, C/I F = F0-1MHz 15 dB F = F0+2MHz -17 dB F = F0-2MHz -15 dB F = F0+3MHz -27 dB F = F0-3MHz -9 dB -50 dBm 30-2000 MHz -30 dBm 2003-2399 MHz -35 dBm 2484-2997 MHz -35 dBm 3000-12750 MHz -30 dBm Intermodulation Blocking PER report integrity 7. Manufacturing Site PT.
PAGE 4
1) FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2) FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
PAGE 5
IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied.
PAGE 6
IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is still responsible for the IC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the IC RSS-102 radiation exposure limits set forth for an population/uncontrolled environment can be satisfied.