User's Manual

ENGLISH
Miscellaneous Information: Printing Photos
115115
ENGLISH
Miscellaneous Information: Connecting the CAM with other Devices
114114
Connecting the CAM to a PC using the USB cable
You can connect the CAM to a PC that supports USB connections.
Use the provided USB cable for connection to a PC.
1. Insert the cradle into the CAM.
2. Connect the provided USB cable to USB port of
the cradle.
3. Move [Mode Selector] down to turn on the CAM
and move it down again.
◆ The Mode Selection screen appears.
4. Connect the other side of the USB cable to the
USB port of your PC.
◆ If your Operating System is Windows XP,
a Removable Disk pop-up dialog will appear.
After completing the data transfer, you must disconnect the cable in the following way.
1. Select the removable disk icon and click the right mouse button to select ‘Safely Remove Hardware’.
2. Select ‘Stop’ and disconnect the USB cable when the pop-up screen disappears.
Disconnecting USB Connection
Notes
✤
If you disconnect the USB cable from the PC or the CAM during the data transfer,
the data transfer will stop and the data may be damaged.
✤
If you connect the USB cable to a PC using a USB HUB or with other device at the same time,
it might cause conflict and may not work properly. If this occurs, remove all other devices and try the connection again.
With the Pictbridge Support, you can control the printer directly through
the CAM in order to print out stored pictures.
For direct printing of your stored pictures using the PictBridge function,
you must connect the CAM to a PictBridge printer using a USB cable.
1. Connect the CAM to the PC with the USB cable.
2. Move [Mode Selector] down to turn on the CAM.
◆ USB menu screen appears automatically.
3. Move the [ ▲ / ▼ ] switch to select <PictBridge> and press the [OK] button.
4. Move the [ ▲ /▼ ] switch to select <Copies> and press the [OK] button.
5. Move the [ ▲ /▼ ] switch to select desired number and press the [OK] button.
◆ You can select the number of copy from 0 to 99.
6. Move the [ ▲ /▼ ] switch to select <Print> and press the [OK] button.
Back
USB Mode
PC-Cam
PictBridge
MassStorage
Print
Next
Previous
Date On
Copies
5
PictBridge 100-0056
Print
Next
Previous
Date On
Copies
1
PictBridge 100-0056
Printing with Pictbridge Function
Notes
✤
If you select <Back> in the menu, the previous menu appears.
✤
If you want to select the next or previous photo, select <Next> or <Previous> using [ ▲ /▼ ] switch.
✤
For further details about printing photos, refer to the User’s manual of the printer.