User's Manual

ManualsBrandsSamsung Electronics ManualsCamcordersDigital Video Camcorder

ENGLISH

Miscellaneous Information: Installing Programs

113113

ENGLISH

Miscellaneous Information: Installing Programs

112112

Installing Windows98SE Driver

To use the USB cable, you may need to install the Windows98SE Driver.

1. Insert the Software CD provided with the CAM

into the CD-ROM drive.

◆ The installation screen appears on your PC Monitor.

2. If the installation screen does not automatically appear,

click ‘Run’ on the Windows ‘Start’ menu and execute

the SETUP.EXE file to begin the installation.

◆ If your CD-ROM drive is set to ‘D:’ drive, type ‘D:\ setup.exe’

in the RUN...dialog press ‘Enter’ on your keyboard.

3. Follow the steps appeared on the PC monitor.

◆ You can use the USB Driver after restarting your PC.

✤

Do not connect your device to a PC before installing the program.

✤

The following instructions are based on Windows 98SE operating system.

Before you begin!

Installing Image Mixer

You can edit the video file with this program.

1. Quit the file and folder you work.

2. Insert the program CD into the CD-ROM drive.

◆ The Setup screen appears automatically.

◆ Open the CD-ROM Drive in ‘My Computer’ and double-click

<Install Image Mixer>.

3. Click <Image Mixer>.

4. Select the language.

5. Follow the steps appeared on the PC monitor.

◆ You can use the Image Mixer after restarting your PC.

Notes

✤

If Image Mixer is not installed, install it again after uninstalling. Uninstall Image Mixer in the ‘Control Panel’.

✤

Do not connect the USB cable before installing the USB Driver. If you click ’ImageMixer’, all files in the Software are installed automatically.

✤

You can install the programs except ’ImageMixer’ separately.

Windows