User's Manual

ENGLISH
Miscellaneous Information: Connecting the CAM with other Devices
111111
ENGLISH
Miscellaneous Information: Connecting the CAM with other Devices
110110
You can copy your recorded files to a regular blank video tape. Connect the CAM to a VCR using the Audio/Video cable before
recording.
1. Insert the blank video tape to the VCR and select ‘Line Input’.
2. Move [Mode Selector] down to turn on the CAM and move it down again.
◆ The Mode Selection screen appears.
3. Select <Out> in System Setting and press the [OK] button. (Refer to page 106)
4. Select <Play> in the Video mode to find the desired recorded file with the [ ▲ / ▼ ] switch.
(Refer to page 36)
5. Move the [ ▲ / ▼ ] switch to find the video file you want to copy and press the [OK] button.
6. Press the [Record /Stop] button on the VCR to start recording.
Notes
✤
Refer to operating instructions of your TV or VCR for detailed information on connecting external devices.
✤
You can playback and stop using the button same as Playing video file on the LCD Monitor. (Refer to page 36)
Copying Video files to a VCR Tape
3
Recording TV program to the CAM
You can record the TV program to the CAM using Video/Audio cable.
If you want to know about connecting the CAM to a TV set,
refer to page 107.
1 2 3 4 5
6 7 8 9 10
ALARM IN ALARM OUT ALARM RESET GND TRIGGER OUT
TAPE END OUT SERIES OUT GND SERIES IN 1 SHOT REC IN
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
IN
OUT
OUT
IN
Note
✤
Refer to operating instructions of your TV or VCR for detailed information on connecting external devices.
1. Turn your TV on and select the program to be recorded.
2. Move [Mode Selector] down to turn the CAM on.
◆ The Mode Selection screen appears.
3. Select <In> in <Display> menu and press the [OK] button. (Refer to page 106)
◆ Press the [Menu] button to finish setting.
4. Press the [Record/Stop] button in Video Record mode to start recording.
◆ Press the [Record/Stop] button again to pause and press it again to start recording.
System Settings
Date/Time
System
Display
Memory
Back
Settings: Display
Back
Line In/Out
In
LCD Color
50 %
LCD Brightness 50 %
Line Output
Line Output
Line Input
Connecting the Video/Audio
cable directly is available