User Manual

AirLine ATX Wireless System 15
ENGLISHFRANÇAISDEUTSCHEESPAÑOLITALIANO
The CR99 receiver can be installed into a standard 19” rack for transport or
permanent installation using the included rack ears. Follow the simple steps below to
mount the CR99:
Rack Mounting
Attach the included rack ears by
screwing each rack ear into either
side of the CR99.
Position the CR99 receiver into
an available rack space and slide
in until the rack ears are touching
the rails of the rack case and are
aligned with the rack rail holes.
Mount the receiver into the rack
using the appropriate size rack
screws (not included). To ensure
equal tension and balance when
installing the receiver, you should
secure screws in a crisscross pattern
of opposite corners: top left ->
bottom right -> top right -> bottom
left.
In order to mount two CR99
receivers in one rack space, the
system includes a center connection
piece. Screw the center connection
piece into bottom of each receiver
and attach the short rack ears to
each receiver.
Mount the receivers into the
rack using the crisscross pattern
described above.