Owner's Manual
Quick
Start
In
order
for
your
wireless
system
to
work
correctly,
both
the
receiver
and
transmitter
must
be
set
to
the
same
channel.
Follow this basic procedure for setting up and using your Stage
212
wireless system:
Physically place the SR212 receiver where
it
will be used, and
fully
extend the antennas
vertically. The general
ru
le
of
thumb
is to maintain
"line
of
sight" between the receiver and
transmitter
so
that
the person using or wearing the transmitter
ca
n
see
the receiver.
With the
SR212
powered off, connect the included power adapter. Turn the
SR212
on
momentarily to confirm
that
the
unit
is receiving power. You'll
see
the
LED
display light up.
Then turn the
SR212
power off.
ij
ij
,!,.
~
©
---
--
s.
With your amplifier or mixer
off
and
vo
lume control
all the
way
down, connect the SR212 receiver
1/4"
outputs (or
XLR
Mix Output) to the inputs of a mixer
or amplifier.
Tu
rn
the Level knob
on
the SR212
completely counterclockwise, then turn its power
on
.
10
SAMSON