Owner's Manual

Troubleshooting
Is s ue
Solutions
Turn on the VH12 transmitter using the Power/ Mutr switch.
Ensure the VH12 transmitter's batteries are installed correctly.
Confirm that the SR212 adaptor is correctly connected and
plugged into an electrical outlet.
No Audio
Turn on the SR212 receiver.
Make sure the SR212 output and audio input connections are
securely connected.
Ensure that the SR212 receiver and VH 12 transmitters are in
line of sight with one another.
Check the receiver and audio input device level controls.
Check the receiver output level and audio input device level.
Distorted Audio
Check the VH l 2's batteries and replace if l ow.
Another transmitter may be broadcasting on the same channe l.
Turn off transmitter that may be ca using interference.
The transmitter may be too far away from the receiver. Move
Audio Dropout
closer to the receiver, or reposition the antennas.
Remove any sources that may cause RF interference, such as cell
phones, cordless phones, lighting equipment, computers, etc.
Transmitters and Contact your Samson reseller or distributor for assistance.
Receiver on Different
Channels
14 SAMSON