User's Manual

6
PXD1 Controls
1. Input Connector - Connect the input device via the mini-XLR connector.
The PXD1 is supplied with either a lavalier or headset microphone.
2. Status Indicator - This LED displays the operation mode:
Amber: Normal Operation
Flashing Amber: Pairing / Low Battery
3. Power/Pair Switch - Press for <5 seconds to turn the unit on or off.
Press for more than 5 seconds to enter pairing mode.
4. Input GAIN Control - This control adjusts the transmitter input sensitivity.
5. Battery Holder - Insert two standard AA (LR6) batteries here, being sure
to observe the plus and minus polarity markings shown. WARNING: Do
not insert the batteries backwards; doing so can cause severe damage
to the PXD1 and will void your warranty.
6. Screwdriver - Used to adjust the input GAIN control.