Owners Manual

6
1. DC Input - Connect the supplied power adapter here.
WARNING: Do not substitute any other kind of power adapter. Doing so can cause severe
damage to the AR299m and will void your warranty.
2. MIX OUTPUTS - Use these unbalanced 1/4” and 1/8” jacks when connecting the AR299m
to consumer (-10 dBV) audio equipment. Both jacks carry a combined signal of CH1 &
CH2. Wiring is as follows: tip hot, sleeve ground.
3. CH 1 & CH 2 XLR OUTPUTS - Use these electronically balanced low impedance (600 Ohm)
XLR jacks when connecting the AR299m to professional (+4 dBu) audio equipment. Pin
wiring is as follows: Pin 1 ground, Pin 2 high (hot), and Pin 3 low (cold).
AR299m Receiver Features Rear Panel
1
2 2
3 3