Specifications

Studio GT Owner’s Manual9
STUDIO GT QUICK START
DIRECT MONITORING
1. To send a mono mix from the CHANNEL 1 and CHANNEL 2 inputs to the Studio GT
speakers and headphone outputs, set the MONO/STEREO button to the up, MONO
position.
2. To separate the mix from the CHANNEL 1 and CHANNEL 2 inputs to the Studio GT
speakers and headphone outputs, set the MONO/STEREO button to the down STE-
REO position. CHANNEL 1 will be heard in the LEFT speaker and CHANNEL 2 will be
heard in the RIGHT speaker.
3. The input signals are mixed with the output signal from your DAW. The MONO/STE-
REO switch does not aect the inputs of your audio software.
4. To balance the signals from the front panel inputs with the output signal from your
DAW, adjust the MIX control until you nd the desired mix. When the MIX control
is turned fully counter-clockwise, only the input signal will be heard. When the MIX
control is turned fully clockwise, only the audio coming from the computer will be
heard.