Microphone Specification Sheet

ARCHITECT’S & ENGINEER’S
SPECIFICATION
The microphone shall be of a dynamic type
with hypercardioid polar pattern. The micro-
phone shall provide its output on a gold-plated
male XLR-type connector. Output impedance
shall be 150 ohms.
The microphone shall be constructed of a
zinc casing and shall contain a triple-plated
multi-stage windscreen and noise filter for the
removal of pops, sibilance and onstage noise, an
aluminum humbucking voice coil for the elimi-
nation of magnetic field interference and true
hum rejection, a Neoprene transformer cover
for the reduction of microphonics, a high-out-
put Neodymium element, and a multi-axis
shock-mount to minimize handling noise. The
microphone shall have frequency response
from 20 Hz to 18.5 kHz, sensitivity of -47 dBV at
94 dB SPL, and a maximum SPL of 137 dB.
Dimensions shall be 2.25
″ (57 mm) head length,
4.5
″ (114.2 mm) main unit length and 6.75″
(172 mm) total length. Weight shall be 8.7 oz.
(250 g). The microphone shall carry a three-
year warranty.
The microphone shall be a SAMSON Q
MIC .
QMIC SPECIFICATIONS
Type: Dynamic
Polar pattern: Hypercardioid
Frequency response: 20 Hz - 18.5 kHz
Sensitivity: -47 dBV @ 94 dB SPL
Max.SPL: 137 dB
Output impedance (@ 1 kHz): 150 Ω
Connector: 3-pin gold-plated balanced XLR male
Dimensions
Head length: 2.25
″ • 57 mm
Main unit length: 4.5
″ • 114.2 mm
Total length: 6.75
″ • 172 mm
Weight: 8.7 oz. / 250 g
Specifications subject to change without notice. © 1998 SAMSON
1.0
0.8
0.6
0.4
0.2
0
20000100005000
2000
1000
5002001005020
-40
-30
-20
-10
0
10
-20
-15
-10
-5
0
5
A • B
Span range : ___
B
Writing Speed : ____sec.0.5
Ref. 0dB Level : ___dB
0 Paper Speed :____mm/sec.
10
LINEAR
S / N
FREQUENCY Hz
QMIC
Measuring Obj.;
Date:
dB V
SAMSON
(Hz)
1/2/96
300Hz
1000Hz
3000Hz
Scale is 5 decibels per division
0°
30°
60°
90°
120°
150°
180°
210°
240°
270°
300°
330°