Operation Manual

1 2 3 1 2 3 4 5 6 5 6
Callouts
1. INPUT Jacks – 1/4” hi-Z input jacks for connecting for instrument, line
level, or speaker level audio.
2. THRU Jacks – 1/4” outputs for passing the input signal through to a stage
amplifier or monitor system.
3. -15dB / -30dB Pad switch – When engaged, the input level is attenuated
by either -15dB or -30dB to prevent distortion or when connecting to a
speaker level output.
4. STEREO/MONO Switch – When the switch is in the STEREO position, each
input is routed to its corresponding output. In the MONO position, the
Left and Right input signals are summed together and fed to both Left
and Right Output jacks.
5. GROUND LIFT Switches – When the switch is engaged, the input ground
(shield) is disconnected.
6. BALANCED OUTPUT Jacks – Male XLR low-Z connectors.
Front Rear