Operation Manual

1 2 3 1 2 4 5 6 7 6
Callouts
1. 1/4” INPUT Jacks – 1/4” hi-Z input jacks for connecting for instruments,
line level, or speaker level audio.
2. RCA Input Jacks – Unbalanced RCA jacks for connecting line level signals.
The RCA jacks are wired in parallel with the 1/4” and STEREO INPUT
jacks.
3. STEREO INPUT Jack – 1/8” stereo input jack for connecting line level sig-
nals. The STEREO INPUT jack is wired in parallel with the 1/4” and RCA
jacks.
4. -12dB Pad switch – When engaged, the input level is attenuated by -12dB
to prevent distortion when connecting high level signals.
5. STEREO/MONO Switch – When the switch is in the STEREO position, each
input is routed to its corresponding output. In the MONO position, the
Left and Right input signals are summed together and fed to both Left
and Right Output jacks.
6. BALANCED OUTPUT Jacks – Male XLR low-Z connectors.
7. GROUND LIFT Switch – When the switch is engaged, the input ground
(shield) is disconnected.
Front Rear