Specifications
Kilo • 1000 Watt Bass Amplier
13
18. DIRECT OUT Jack – Use this electronically balanced XLR jack to route signal from
the Kilo to a professional mixing console, as a tap to a main PA system via a mic
input on the console, or to an external amplier. The DIRECT OUT knob (on the
front panel) controls the signal level at this jack. You can also use the DIRECT OUT
jack to route signal to an external amplier with a -10 dB input sensitivity.
19. TUNER OUT Jack – Use this jack to connect to an electronic tuner using a ¼” TRS
cable. The TUNER output is always active, even when the MUTE switch is engaged,
which allows you to tune your instrument silently. This output may also be used as
a line level direct output feed.
Rear Panel