User Manual

7
step
PAGE 5 OF 8
SamsonRope.com | Email [e-mail] | Tel [phone]
Double Braid Class II Eye Splice Modified for TS-II Turbo
SAMSON SPLICING INSTRUCTIONS
Working from the eye towards Mark 4,
perform 5 tucks of the cover strands in the
same alternating pattern; over 1 and under
4, over 1, under 5. The 2 groups of cover
strands should meet near the point where
the cover was initially cut, 2 d lengths from
Mark 3, and 1-1/2 d lengths from Mark 4.
WEAVING COVER GROUPINGS: EYE END
TRIMING BACK TAPED TAILS
Weave strand groupings
under core picks
Alternate 4
and 5 Picks
4 picks 4 picks5 picks
5 picks
8
step
Cut back the cover tails leaving a 1/2 d length of tail
exposed and arrange them so they lay as close to the
body of the rope as possible. Tape them down.
Tape over the exposed tails with enough tape to adequately
cover the tails, plus an extra 1/2 d on each side.
TAPING TAILS
9
step
Approximately 1-1/2 fids Approximately 2 fids
Cut back cover tails
Tape with black electrical tape