User Guide

UP1 USB Adapter Bundles
Specifications
Microphone Input 2.1KΩ source used for measurements
I/O 1/8” mono input
T: signal +3VDC mic bias, R: n/c, S: ground
Frequency Response 12Hz-18kHz, +0/-1dB
Maximum Input Signal +11dBu, ≤1%THD+N, 100Hz-20kHz
minimum gain settings
Noise Floor -89dBFS (A-wt.) minimum gain settings
Dynamic Range 87dB (re 0dBFS, A-wt.)
microphone gain setting: -1.1dB
Headphone Output 16Ω load used for measurements
I/O 1/8”stereo input
T: left channel, R: right channel, S: headphone ground
Frequency Response 20Hz-18kHz, +0/-3dB
Maximum Output Power 25mW (re 0dBVS, 22Hz-22kHz BW)
Noise Floor -95dBU (A-wt.)
Dynamic Range 93dB (re-2dBU, A-wt.)
Digital to Analog Volume 0dBFS USB playback = -2dBu headphone out
USB
I/O USB Type-C (USB2.0)
USB C to USB A adapter included
Bit Depth 16-bit
Sample Rate 44.1kHz/48kHz
Power +5VDC, 100mA max
OS Compatibility MacOS, Windows, Linux, iOS, Android
Weight 19g without USB adapter
25g with USB adapter
Dimensions 210mm x 24mm x 15.75mm without USB adapter
242mm x 24mm x 15.75mm with USB adapter