DEU1 Headset & LMU1 Lavalier Bundle with UP1 USB Adapter QUICK START GUIDE
Quick Start 1. 2. 3. 4. Connect LM8 (LMU1 bundle) or DE5 (DEU1 bundle) to UP1’s threaded 3.5 mm (1/8”) microphone input jack. Headphones or earbuds can be connected to the 1/8” headphone output jack depending on user’s application. Plug the USB-C, or USB-A adapter into a desktop or laptop computer, tablet, or smart device. LED lights white indicating proper connection. NOTE: Playback volume and microphone gain must be adjusted using the host device, such as a computer, laptop, smartphone, or tablet.
Specifications Microphone Input I/O Frequency Response Maximum Input Signal Noise Floor Dynamic Range Headphone Output I/O Frequency Response Maximum Output Power Noise Floor Dynamic Range Digital to Analog Volume USB I/O Bit Depth Sample Rate Power OS Compatibility Weight Dimensions 2.1KΩ source used for measurements 1/8” mono input T: signal +3VDC mic bias, R: n/c, S: ground 12Hz-18kHz, +0/-1dB +11dBu, ≤1%THD+N, 100Hz-20kHz minimum gain settings -89dBFS (A-wt.
IMPORTANT SAFETY INFORMATION FCC Notice This device complies with Part 15 of the FCC Rules Class B and RSS-210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
