Specifications

AirLine Micro Camera System
13
Follow these steps to mount the AR2 onto a camera:
1. Slide the AR2 Camera Mount into the camera’s
standard hot shoe mounting point, and lock
the Camera Mount in place by tightening the
knurled washer.
2. Insert the AR2 receiver into the Camera Mount
so that the antennas are facing the front of the
mount. Fully extend the two antennas.
3. Connect the AR2 audio output to the camera’s
audio input using the supplied 3.5mm or XLR
cable.
Note: The AR2 Camera Mount does not provide
power for the AR2 receiver.
Note: If your camera does not have a standard hot
shoe mounting point, an additional adapter may
be necessary. Please refer to your camera’s user
guide.
AR2 Camera Mount