Specifications
12
AR2DT Dock
For added convenience and easy setup, we have included the
AR2DT dock. To use the dock, please follow these steps:
1. Slide the AR2 receiver until fully seated into the
section of the AR2DT with the USB and 3.5mm con-
nectors.
2. The AL2 will t into the side with the cutout. Push
the AL2 into the dock until it is completely inserted.
Make sure that the USB connector on the dock and
USB power inlet on the transmitter are facing the
same direction (as shown on right).
3. Attach the included audio cable to the audio output
on the back panel of the AR2DT to connect the AR2
to a mixer or power amplier.
4. To recharge the AR2 receiver and AL2 transmitter,
connect the USB Y-cable to the USB DC input on the
back panel of the AR2DT and connect the cable to
the included Universal AC adaptor.