Specifications

AirLine Micro Camera System

Guided Tour - AL2 Transmitter

6. Attenuation Switch - The AL2 transmitter features a signal attenuation switch

that is used to select the input level of “0dB” or “-15dB.” This attenuation switch

has been factory preset to “0dB,” providing the optimum level for most situ-

ations. If you see the input of microphone repeatedly clipping the output,

first try to adjust the gain control as described in step 2, above. If you cannot

attenuate the signal low enough using the gain control, choose the “-15dB”

level setting.

7. USB DC Power Input - Connect the supplied universal adaptor to recharge the

internal lithium-ion battery. The USB DC input will also accept USB bus power

from a computer USB port, or any 5-volt DC adaptor (such as a car or cell phone

charger) that has a USB output.

NOTE: The Universal AC Adaptor will charge the AL2 & AR2 faster than a computer

USB port.

NOTE: The USB port can only be used for charging purposes and cannot be used

for data exchange between a PC and the AL2 transmitter.



