Specifications

AirLine Micro Camera System
9
Guided Tour - AL2 Transmitter
1. Input Connector - Connect an input device. The AL2 is supplied with an
LM10 lavaliere microphone connected via a locking 3.5mm mini-phone
jack.
2. Multi-Function Switch - Press and hold this switch to turn the unit on
or off. Press and release to mute or unmute the transmitter. To adjust the
transmitter volume, while the AL2 is powered on, press and hold until the
power turns off, release the switch, then press and hold the switch for 5
seconds and the Status Indicator will first flash GREEN, then YELLOW.



Function Activation Hold Time LED Status
Power ON/OFF Press and Hold > 1 sec GREEN
Mute ON/OFF Press 0.2 – 1 sec Flashing GREEN
Volume Adjust Press and Hold > 5 sec Flashing YELLOW
Increase Gain Press (Total 5 steps) > 0.2 sec Flashing YELLOW
Decrease Gain Press (Total 5 steps) > 0.2 sec Flashing YELLOW
Set Level Don’t Press 10 sec GREEN