Specifications

4. Low Battery Indicator - This BLUE LED displays the status of the battery. The Low Battery Indicator will flash BLUE when the

unit is on, and the battery is low. When recharging the AR2, the LED will light steady BLUE until the battery is fully charged,

then the indicator will turn off.

5. Audio Output Level Switch - Sets the audio output level of the unbalanced output to microphone or line level.

6. USB DC Power Input - Connect the supplied universal adaptor to recharge the internal lithium-ion battery. The USB DC input

will also accept USB bus power from a computer USB port, or any 5-volt DC adaptor (such as a car or cell phone charger) that

has a USB output.

NOTE: The Universal AC Adaptor will charge the AL2 & AR2 faster than a computer USB port.

NOTE: The USB port can only be used for charging purposes and cannot be used for data exchange between a PC and the AR2

receiver.

7. 1/8” Unbalanced Output - Use this unbalanced (600 Ohm min.) 1/8” (3.5 mm) mini-phone jack when connecting to audio

equipment.

Guided Tour - AR2 Receiver