Operating instructions

72 EB 8384-6 EN

Start-up – Settings

Table 9 · Reset functions Reset Code 36

Diag Std DS

Initialization NO YES YES

Fail-safe behavior

Air supply failure NO NO YES

Power supply failure of positioner NO NO YES

Power supply failure of external solenoid valve NO NO YES

Emergency mode NO NO NO

Operating hours counter NO NO NO

Device in operation NO YES YES

Device switched on since initialization NO YES YES

Device in operation since initialization NO YES YES

Logging NO YES YES

Code

no. Parameter

2 Reading direction NO YES YES

4 Pin position NO YES YES

5 Nominal range NO YES YES

6 Initialization mode NO YES YES

7 Direction of action NO YES YES

8 Lower travel/angle range value NO YES YES

9 Upper travel/angle range value NO YES YES

10 Lower travel/angle range limit NO YES YES

11 Upper travel/angle range limit NO YES YES

12 Set point, lower range value NO YES YES

13 Set point, upper range value NO YES YES

14 CLOSED end position NO YES YES

15 OPEN end position NO YES YES

16 Pressure limit NO YES YES

17 Proportional-action coefficient Kp level NO NO NO

18 Derivative-action time Tv level NO NO NO

19 Tolerance band NO YES YES

20 Select characteristic NO YES YES

21 Enter transit time OPEN NO YES YES

22 Enter transit time CLOSED NO YES YES

24 Total valve travel limit NO

YES

25 Alarm mode NO

YES