User's Manual

•
Ear plug of handsfree into ear jack of handset to the full.
•
Put a handset into handsfree.
•
Fix
“
Handsfree/Ear Mic
”
switch to
“
Handsfree
”
mode.
When released from the factory, it is to be fixed at Handsfree mode.
•
When there is an incoming call,
- With Receiver/End/Redial switch pressed the call is connected.
- Open the flip of the handset
- Press any button on the handset.
•
To make outgoing call, press a desirable number on the handset,
and then press either the
“
send
”
button on the handset or
“
Receiver/
Transmitter/ Redial
”
switch on the remote control to talk through
microphone and speaker of handsfree.
•
If the call is complete, press either
“
Receiver/End/Redial
”
switch on
remote control or
“
End
”
button on the handset.
•
In case of pressing
“
Receiver/End
”
switch on remote control,
the last call number is redialed. (Some models don
’
t work on the function)
•
If there is something howling amidst telephone communication,
the volume is to be adjustable.
The call with handsfree
How to adjust the volume
•
It
’
s good to adjust during communication.
-
If push back the handle of a remote control, the volume gets
higher step by step. ( It
’
s adjusted to the number of pushing back.)
-
If pull forward the handle of a remote control, the volume gets
lowered step by step. (It is adjusted to the number of pulling forward.)
!
Notice!! Volume is adjustable to the 12 steps.
6
The call with Ear Microphone
•
It is for privacy call from others in a car.
•
Plug ear microphone(headset) in ear microphone jack, and one press
“
Handsfree/ Ear Mic
”
switch. It
’
s switched to Ear Mic mode with
handsfree LED light off.
Speaker
Charger jack
Power supply jack
for DC adaptor
(12~24V)
Transmitter switch
Changeover switch
of
“
Handsfree/ Ear
Mic
”
Handsfree LED
( Light off
at Ear Mic Mode)
Switch for adjusting the volume
Holder for
handset
Plug for connection
to handset
Mic Jack
Higher
Lower
Part Name
7
Ear Phone
Jack
Operation Instruction Operation Instruction