Instructions / Assembly
2
2
1. Start assembling the rails and end frames.
2. Match the number for the optimal results.
3. Fasten the rail and end frame with a lag bolt.
Rail
End Frame
4. Be sure to set the end of the rail and end frame flush
(See “X”). Do the same on three other sides.
CAUTION: Do NOT fasten the
bolt too tightly; The lag bolt could
cave in and damage the post, rail,
or end-frame.
5. Put the small floor joist. Match the number.
6. This is an alternative way to do step 5; it may be easier
to put the small floor joist on side way.