Instructions / Assembly

1. Making two holes for Torii poles. Remember that you

need to set minimum 6” with cement.(See marks on posts.)

Minimum hole

dimensions :

12” W x 12”L x 18” D

3. Place two Hashira poles with a hole inside. Alterna-

tively, you can do it on the ground.

5. GENTLY Insert a NUKI through pole holes. It is the short-

est pole without holes. Do it one pole (HASHIRA) at a time.

6. Do the same on the other side.

2. Place two wood blocks in the holes. Put a temporary

wood board at top to check the level; it will facilitate the

Torii installation. Remove the wood blocks.

ATTENTION:

*Take time to check the

LEVEL; it is VERY difficult to

correct the Torii position

later.

4. The holes are fragile. Handle with care.

FRAGILE

Nuki