Installation Guide

SamsGazebos

○

Japanese Shinmei Style Torii Gate

Assembly Instructions & Installation Guide

Thank you for purchasing a Japanese Myojin Style Torii Gate from SamsGazebos. Assembling it may take 45 minutes and an

hour to set with cement. Minimum two persons are recommended to assemble this item for your safety. Please work on a

clean level floor for the best result. Remove the wrapping material, prepare the tools and material, and lay out the parts before

assembly in order to save you time and effort. Each kit is custom built with pilot holes for your convenience. Wash hands after

handling.

Tools / things you need:

◇ Cordless Screw Driver or Philips Screw Driver(+)

◇ 2 Socket Wrenches

◇ Hammer

◇ Level

◇ Ladder

◇ Square

◇ Knife

◇ Pencil / Pen

◇ Measure Tape

◇ Shovel

◇ Minimum 4 bags of ready mix cement (Get extra bags of cement if you have large holes.)

◇ Wheelbarrow or container to mix cement

◇ Water

◇ Nitrile Gloves (included)

◇ 2 Strings (included)

◇ Hardware is included: four 1/2” x 10” lag bolts with washers and four screws (2-1/2”)

Made in USA

1 Kasagi

1 Nuki

2 Hashira

4 Wood Pegs

1 Extra Wood Board

2 Cement Frames & Strings

2 Wood Blocks

HANDLE With CARE

Do not drop poles.