3-296-705-12(1) Video Cassette Recorder/ DVD Recorder RDR-VX560 © 2008 Sony Corporation Operating Instructions US Manual de instrucciones ES
WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. The AC power cord must be changed only at a qualified service shop. Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine, fire or the like. CAUTION The use of optical instruments with this product will increase eye hazard.
• Do not place the recorder in a location near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock. • Do not place the recorder in an inclined position. It is designed to be operated in a horizontal position only. • Keep the recorder, discs, and cassettes away from equipment with strong magnets, such as microwave ovens, or large loudspeakers. • Do not place heavy objects on the recorder.
About this manual • Instructions in this manual describe the controls on the remote. You can also use the controls on the recorder if they have the same or similar names as those on the remote. • The on-screen display illustrations used in this manual may not match the graphics displayed on your TV screen. • The explanations regarding discs in this manual refer to discs created on this recorder. The explanations do not apply to discs that are created on other recorders and played back on this recorder.
Table of Contents WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 What is a Video Cassette Recorder/DVD Recorder? . . . . . . . . . . . . . . . . . . . . . . . . . . 8 How to Use the On-Screen Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Hookups and Settings .
VCR Operation VCR Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Playing a VHS Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Playback Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Searching Using Various Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Notes About This Recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 About i.LINK . . . . . . . . . . . . . . . . .
What is a Video Cassette Recorder/DVD Recorder? This is a DVD recorder with built-in VHS video deck, and allows recording/playback of DVD discs and VHS tapes. DVD editing is also possible. Recording and timer recording One Touch Dubbing (DVD y VHS) Record TV programs on a DVD or VHS tape, either manually or using the timer. You need to connect a tuner such as a cable box to this recorder. Dub in either direction between a DVD disc and VHS tape with the simple press of a button.
Quick access to recorded titles – Title List Display the Title List to view all titles on a disc and select a title for playback or editing. Title List (Original) 1/4 Dubbing (DV/USB t DVD) Connect your DV camcorder or USB device to the recorder to dub video or photo contents to a DVD. 10:10 AM No. Title Length Edit 01 LINE 1 01:29:03 > 02 LINE 1 00:31:23 > 03 LINE 1 01:59:00 > 04 LINE 1 00:58:56 > Dubbing T LINE 1 May/02/2008 08:00 PM i.
A How to Use the On-Screen Menus The following three displays are mainly used to operate this recorder. Once you become familiar with the basic operations, you will find the recorder easy to use. 1 2 3 4 5 6 7 8 9 “Title List” Displays the list of the disc contents, including the recording information and movie thumbnail image, which allows you to select a title to play or edit. Title List (Original) 1/4 10:10 AM No.
Sub-menu OPTIONS The sub-menu appears when you select an item from a list menu (e.g., a title from the Title List menu), and press ENTER. The sub-menu displays options applicable only to the selected item. The displayed options differ depending on the situation and disc type. Select an option by pressing M/m and ENTER. The OPTIONS menu appears when you press OPTIONS. You can search for a title/chapter/ track, check the playing and remaining time, or change settings for audio/angle/subtitle.
Hookups and Settings Hooking Up the Recorder Follow steps 1 to 7 to hook up and adjust the settings of the recorder. Notes • Plug cords securely to prevent unwanted noise. • See the instructions supplied with the components to be connected. • You cannot connect this recorder to a TV that does not have a video input jack. • Be sure to disconnect the power cord of each component before connecting. Do not connect the power cord until you reach “Connecting the Power Cord” on page 20.
Connecting a cable box/satellite receiver and set top box controller Wall Set top box controller (supplied) Cable box/ satellite receiver Hookups and Settings Connect the LINE 1 IN jacks using an audio/video cord. With this hookup, you can record any channel on the cable box or satellite receiver. Be sure that the cable box or satellite receiver is turned on. You need to connect to the LINE 1 IN (VIDEO/AUDIO) jacks for the Synchro-Rec function (pages 54 and 80).
z Hint You can also connect a cable box/satellite receiver to the LINE 2 IN jacks on the front panel. In this case, select “Line2” for “Connections” of “Set Top Box Control” in the “Features” setup (page 103). Notes • Do not connect to the S VIDEO and yellow VIDEO jacks at the same time. • Synchro-Recording does not work with some tuners. For details, see the tuner’s operating instructions.
Step 3: Connecting to Your TV Connect the supplied audio/video cord to the LINE OUT (VIDEO/AUDIO L/R) jacks of the recorder. If your TV has an HDMI jack, or component video input jacks, see page 16 or 17.
If your TV has an HDMI input jack Connect the HDMI* OUT jack using a certified Sony HDMI cord (not supplied). You will enjoy high quality picture and sound. If your TV accepts progressive 1080p format signals, you must use this connection. The HDMI indicator is lit in the front panel display when the recorder outputs signals through the HDMI OUT jack. Be sure to turn off the recorder before connecting an HDMI cord. * This DVD recorder incorporates High-Definition Multimedia Interface (HDMI™) technology.
If your TV has component video input jacks INPUT COMPONENT VIDEO IN TV or projector L AUDIO R (white) Y (red) PB PR (green) (blue) Hookups and Settings Connect the COMPONENT VIDEO OUT jacks using a component video cord (not supplied) or three video cords (not supplied) of the same kind and length. You will enjoy accurate color reproduction and high quality images.
Step 4: Connecting to Your AV Amplifier (Receiver) Select one of the following patterns A or B, according to the input jack on your AV amplifier (receiver). This will enable you to listen to sound through your AV amplifier (receiver).
B Connecting to a digital audio input jack This connection uses a stereo amplifier’s (receiver’s) two front speakers for sound. Use this connection if your AV amplifier (receiver) has a Dolby*1 Digital or DTS*2 decoder and a digital input jack. You can enjoy the surround effect of Dolby Digital (5.1ch) or DTS (5.1ch). After you have completed the connection, make the appropriate settings under the “Audio” setup (page 100). Otherwise, no sound or a loud noise will come from your speakers.
Step 5: Connecting the Power Cord Step 6: Preparing the Remote Plug the recorder and TV power cords into an AC outlet. After you connect the power cord, you must wait for a short while before operating the recorder. You can operate the recorder only after the front panel display lights up and the recorder enters standby mode. If you connect additional equipment to this recorder (page 27), be sure to connect the power cord only after all connections are complete.
Controlling TVs with the remote TV INPUT Switch your TV’s input source You can adjust the remote control’s signal to control your TV. TV DIGITAL/ ANALOG Select the broadcast on a Sony TV that can switch between digital and analog Notes Number buttons 1 2 3 4 5 6 7 8 9 0 TV DIGITAL/ ANALOG TV "/1 TV INPUT TV VOL +/– 1 TV CH +/– Hold down TV "/1 located at the bottom of the remote.
Manufacturer Code number Sampo 12 Samsung 03, 04, 12, 20 Sanyo 11, 14 2 Press SYSTEM MENU. The System Menu appears. 3 Select “Setup,” and press ENTER.
7 Set the command mode for the remote so it matches the command mode for the recorder you set above. Follow the steps below to set the command mode on the remote. B While holding down ENTER, enter the command mode code number using the number buttons. Command Mode Code number DVD1 number button 1 DVD2 number button 2 DVD3 number button 3 C Hold down both the number buttons and ENTER at the same time for more than three seconds.
3 Switch the input selector on your TV so that the signal from the recorder appears on your TV screen. No Disc Easy Setup Enter the brand code of your set top box. “Initial settings necessary to operate the DVD recorder will be made. You can change them later using setup.” appears. • If this message does not appear, select “Easy Setup” in the “Setup” display to run Easy Setup (page 106). 4 OK Press ENTER. The setup display for selecting the language used in the on-screen display appears.
11 Press ENTER. No Disc Easy Setup 10:10 AM Easy Setup is finished. 1 Turn on the recorder and the cable box/ satellite receiver. 2 Point the recorder’s remote at the recorder (not at the cable box/satellite receiver). 3 Press CH +/– and check that the channel changes on the cable box/satellite receiver window. 4 Press the number buttons and check that the channel changes on the cable box/ satellite receiver window. 12 Press ENTER when “Finish” appears. Easy Setup is finished.
2 26US Affix it so that the set top box controller is near the remote control sensor on your cable box/satellite receiver.
Connecting Another VCR or Similar Device Connecting to the LINE 2 IN jacks on the front panel Connect other VCR or similar device to the LINE 2 IN jacks of this recorder. You can connect a second DVD player and record DVDs. Hookups and Settings After disconnecting the recorder’s power cord from an AC outlet, connect the other VCR or similar recording device to the LINE IN jacks of this recorder. Also refer to the operating instructions supplied with the connected equipment.
Notes • Do not connect more than one type of video cord between the recorder and your TV at the same time. • Pictures containing copy protection signals that prohibit any copying cannot be recorded. You cannot dub from DVD VIDEOs to this recorder. • Do not connect the output jack of this recorder to another equipment’s input jack with the other equipment’s output jack connected to the input jack of this recorder. Noise (feedback) may result.
Hookups and Settings 29US
Quick Guide to Disc Types Recordable and Playable Discs Icon used in this manual Formatting (new discs) Compatibility with other DVD players (finalizing) +RW Automatically formatted Playable on DVD+RW compatible players (automatically finalized) VR mode -RWVR Format in VR mode*2 (page 48) Playable only on VR mode compatible players (finalization unnecessary) (page 66) Video mode -RWVideo Format in Video mode*2 (page 48) Playable on most DVD players (finalization necessary) (page 66)*7 Automa
Recording Features Editing Features Auto Chapter (page 50) Change Title Name (page 61) Erase Title/ Chapter (page 58) A-B Erase (page 59) Divide Title (page 60) Playlist (page 62) Yes Yes Yes Yes/No*3 Yes Yes No Yes Yes Yes Yes/Yes*4 Yes Yes Yes Yes Yes Yes Yes/No*3 No No No No Yes Yes Yes/No*5 No No No No Yes Yes Yes/Yes*5 Yes Yes Yes No Yes Yes Yes/No*5 No No No *1 *2 *3 *4 *5 *6 CPRM (Content Protection for Recordable Media) is a coding technology that
Playable Discs Disc Type Disc Logo DVD VIDEO DVD-RAM — VIDEO CD Icon used in this manual DVD Discs such as movies that can be purchased or rented RAM DVD-RAMs recorded by another recording device. 12 cm discs without cartridges, or removable from their cartridges can be played.
Note on playback operations of DVD VIDEOs/ VIDEO CDs Note on DualDiscs A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed.
DVD/USB Playback Playing Discs +RW -RWVR -RWVideo DVD RAM VCD Z OPEN/ CLOSE DVD +R CD -RVR -RVideo DATA CD DATA DVD z Hints • You can play DATA CDs or DATA DVDs with MP3 audio tracks or JPEG image files (pages 41 or 42). • If you insert a DVD VIDEO, VIDEO CD, or CD, playback starts automatically depending on the disc. • When playing a DVD+RW, DVD-RW, DVD+R, DVD-R, and DVD-RAM, you can select the title from the Title List menu (page 38).
Playback Options Z OPEN/CLOSE Number buttons ANGLE 1 2 3 4 5 6 7 8 9 0 MENU SUBTITLE AUDIO REPLAY/ O RETURN ADVANCE . PREV DVD/USB Playback M/m/ NEXT H PLAY x STOP X PAUSE Button Operation Disc Z OPEN/CLOSE Stops playing and opens the disc tray. All discs AUDIO Selects one of the audio tracks recorded on the disc when pressed repeatedly. -RWVR -RVR : Selects the main or sub sound. -RWVR -RVR DVD VCD DVD : Selects the audio source.
Button Operation Disc Fast reverses or fast forwards the disc when pressed during playback. Search speed changes with each press: All discs (fast reverse/fast forward) fast reverse FR1 T FR2*2 T T FR3*3 T T T (slow) Plays in slow motion when pressed in pause mode. Playback speed changes with each press: reverse slow motion T TT TTT X PAUSE fast forward t FF1*1 t t FF2*2 t t t FF3*3 forward slow motion t tt ttt Pauses playback.
Playing quickly with sound (Scan Audio) (DVDs with Dolby Digital soundtracks only) You can play quickly with dialog or sound during FF1 fast-forward of a DVD with Dolby Digital soundtracks. Simply press M during playback. z Hint To turn off the Scan Audio function, set “Scan Audio” of “Audio” to “Off” in the “Setup” display (page 101). – you edit the title after stopping playback. – you make a recording.
One-Touch Play (for HDMI connections only) Press H PLAY. With one touch of the H PLAY button, your TV automatically turns on and the TV’s input is switched to the recorder. Playback starts automatically. Set “Control for HDMI” to “On” in the “Features” setup (page 104) to use this function. The TV’s input will also switch to the recorder automatically if a disc with auto play function is loaded.
4 Select the title, and press ENTER. The sub-menu appears. 5 Select “Play,” and press ENTER. Playback starts from the selected title on the disc. About the Title List for DVD-RWs (VR mode) and DVD-Rs (VR mode) +RW -RWVR -RWVideo DVD RAM +R -RVR -RVideo VCD You can search a DVD by title or chapter, and VIDEO CD by track or scene. As titles and tracks are assigned individual numbers on the disc, select the title or track by entering its number. You can also search for a scene using the time code.
4 Press ENTER. The recorder starts playback from the selected point. To turn off the display, press OPTIONS. Notes • Depending on the disc, you may not be able to use the OPTIONS menu to search for a title/chapter/track, or enter the time code for a playback point. • When playing a Playlist title, you may not be able to search for a scene using the time code.
*1 Also appears in stop mode with Resume Play activated (page 37). *2 Title type (original or Playlist) for DVD-RWs (VR mode)/DVD-Rs (VR mode)/DVD-RAMs. Viewing information on the front panel display You can view the information on the front panel display. Press TIME/TEXT repeatedly. DATA CD DATA DVD You can play DATA CDs (CD-ROMs/CD-Rs/ CD-RWs)/DATA DVDs (DVD-ROMs/ DVD+RWs/DVD-RWs/DVD+Rs/DVD-Rs) that contain MP3 audio tracks or JPEG image files.
If you insert a DATA CD/DATA DVD containing only MP3 audio tracks, the “Music” display appears. Go to step 4. 3 Select “Music,” and press ENTER. The “Music” display appears. 4 Select an album, and press ENTER. Playing JPEG image files You can play JPEG image files on DATA CDs or DATA DVDs. 1 2 10:10 AM Music 01-Track1.mp3 02-Track2.mp3 enjoy a slide show with sound (page 43). Stop 00:00:00 Prev Directory 0/9 Place a DATA CD/DATA DVD on the disc tray.
: Rotates the image (page 43). : Zooms the image (page 43). Press OPTIONS to turn on/off the menu icons. To play the slide show 1 When a disc contains both MP3 audio tracks and JPEG image files, you can enjoy a slide show with sound. 1 2 Press DVD to operate the DVD recorder. Insert a DATA CD/DATA DVD containing both the MP3 audio tracks and JPEG image files. The display for selecting a media type appears. Press
About MP3 audio tracks and JPEG image files MP3 is audio compression technology that satisfies the ISO/IEC MPEG regulations. JPEG is image compression technology. You can play back DATA CDs (CD-ROMs/CDRs/CD-RWs) or DATA DVDs (DVD-ROMs/ DVD+RWs/DVD-RWs/DVD+Rs/DVD-Rs) recorded in MP3 (MPEG1 Audio Layer 3) and JPEG format. However, this recorder only plays DATA CDs whose logical format is ISO9660 Level 1/Level 2 or Joliet, and DATA DVDs of Universal Disk Format (UDF).
Playing From a Connected USB Device 5 Select “Photo,” “Music,” or “Movie,” and press ENTER. • To play MP3 audio tracks, select “Music.” See “Playing MP3 audio tracks” (page 41) for details. • To play JPEG image files, select “Photo.” See “Playing JPEG image files” (page 42) for details. • To play movie files, select “Movie.” The contents of the HDD camcorder are listed. You can play MP3 audio tracks or JPEG image files stored in a USB device connected to the USB jack.
z Hints • The recorder can play movie files that are recorded with an HDD camcorder and have the extension “.MPG.” • You cannot play movie files recorded with a digital still camera. Notes • The recorder may not be able to play some JPEG image files, MP3 audio tracks or movie files that have been edited on a PC. • Do not disconnect a USB device while reading or playing files. • Some files may take time to appear.
Press REC MODE repeatedly to switch the recording modes. DVD Recording I want to record with the best possible picture quality, so I’ll select HQ. Before Recording Before you start recording… z Hints • To play a disc recorded with this recorder on other equipment, finalize the disc (page 66). Note that you cannot further record or edit on a finalized disc.
– Recording on a disc that has already been edited – Recording only a still picture or just sound • Since the recording mode for recorded titles is calculated after sampling the recorded data during playback, it may be displayed differently from the mode you selected when recording. However, the actual recording itself is correctly made in the selected mode.
4 DVD Recording From Connected Equipment Without the Timer +RW -RWVR -RWVideo +R -RVR Wait until “LOAD” disappears from the front panel display. Unused discs are automatically formatted. For the DVD-RW/DVD-R’s recording format (VR mode or Video mode), see “Formatting a new disc” on page 48. -RVideo You can record TV programs on the recorder through the connected cable box/satellite receiver.
To watch a VHS tape while recording Press VIDEO to operate the VCR, insert a tape, then press H PLAY. Checking the disc status while recording z Hint You can turn off the TV during recording. You can check the recording information such as recording time or disc type. Press DISPLAY during recording. Notes • Recording may not start immediately after z REC is pressed. • You cannot change the recording mode during recording or recording pause.
DVD Timer Recording From Connected Equipment +RW -RWVR -RWVideo +R -RVR 2 -RVideo Recording side facing down 3 Wait until “LOAD” disappears from the front panel display. Unused discs are automatically formatted. For the DVD-RW/DVD-R’s recording format (VR mode or Video mode), see “Formatting a new disc” on page 48. Notes • Do not operate your cable box or satellite receiver just before or during a timer recording. This may prevent the accurate recording of a program.
E “Ch”: Selects the channel or input source. • When using the cable box/satellite receiver control, select the channel. • When not using the cable box/satellite receiver control, select the input, LINE1 or LINE2. Select the channel on the connected cable box/satellite receiver’s side before the timer recording starts. F “Mode”: Selects the recording mode (page 47). To use the Rec Mode Adjust function (page 52), select “AUTO.” beginning of the program that starts later will be cut. 7:00 Press ENTER.
Changing or Canceling DVD Timer Settings (Timer List) 4 Select the timer setting you want to change or cancel, and press ENTER. The sub-menu appears. Timer List +RW +R -RWVR -RWVideo -RVR -RVideo You can change or cancel timer settings using the Timer List menu. 1 2 3 4 5 6 7 8 9 5 0 No.
• You cannot change the timer settings for a recording currently underway. • The Timer List displays both the DVD recorder and VCR timer settings. Recording From Connected Equipment With a Timer (Synchro Rec) +RW -RWVR -RWVideo +R -RVR -RVideo You can set the recorder to automatically record programs from connected equipment that has a timer function (such as a satellite tuner). Connect the equipment to the LINE 1 IN (VIDEO/AUDIO) jacks on the rear of the recorder (page 13).
4 Press REC MODE repeatedly to select the recording mode. If the timer settings of a Synchro-Recording and another timer recording overlap The display changes on the TV screen as follows: Regardless of whether or not the program is a Synchro-Rec program, the program that starts first has priority. The recorder starts recording the second program about ten seconds after the first program has finished.
Recording From Another VCR or Similar Device +RW -RWVR -RWVideo +R -RVR 3 The front panel display changes as follows: -RVideo You can record from a connected VCR or similar device. For connection details, see “Connecting Another VCR or Similar Device” on page 27. To record from the equipment that has a DV/D8 output jack (i.LINK jack), use the DV IN jack on the front panel. For details, see page 86. To record from a USB device connected to the USB jack, see page 89.
Edit options for DVD-RWs (VR mode)/ DVD-Rs (VR mode) DVD Editing Before Editing This recorder offers various edit options for various disc types. Before you edit, check the disc type in the “Disc Information” display (page 64), and select the option available for your disc. Notes • You may lose the edited contents if you remove the disc or a timer recording starts while editing. • You cannot edit recordings on DVD-RWs (Video mode), DVD+Rs, or DVD-Rs (Video mode) recorded on other DVD equipment.
z Hints • You can switch the Title List to show original or Playlist. While the Title List menu is turned on, press ORIGINAL/PLAYLIST repeatedly. • You can rename or erase a Playlist title (page 64). Notes • You cannot protect Playlist titles. • If a message appears and indicates that the disc’s control information is full, erase unnecessary titles. • You cannot create or edit Playlist titles on a finalized disc. When you want to edit or record on the DVD-RW again, unfinalize the disc (page 66).
4 Select an option, and press ENTER. You can select from the following: “Title Erase”: Erases the selected title. Select “OK” when asked for confirmation. “Chapter Erase”*1: Allows you to select a chapter in the title and erase it (see below). “Protect”*2: Protects the title. Select “On” when the Protection display appears. “ ” appears for the protected title. To cancel the protection, select “Off.” “ ” changes to “ .” “Title Name”: Allows you to rename the title (page 61).
2 Select a title, and press ENTER. The sub-menu appears. 3 Select “A-B Erase,” and press ENTER. The display for setting point A and B appears. “Start” is selected. A-B Erase 10:10 AM Title No.01 Start Start 00:00:00 End End 00:00:00 Finish Erase 00:00:07 T Title No.01 May/02/2008 08:00 PM 4 Press ENTER at the start point of the section to be erased (point A). You can use H PLAY, , . PREV/> NEXT, and X PAUSE to find the point.
4 Press ENTER at the point where you want to divide the title. You can use H PLAY, , . PREV/> NEXT, and X PAUSE to find the point. At the point you want to select, press H PLAY or X PAUSE, and press ENTER. “Divide” is selected. Divide Title (Original) 10:10 AM Title No.01 Point Start 00:00:00 Changing the Name of a Title +RW DVD End 00:00:10 2 3 4 5 6 7 8 9 0 Press ENTER. The display asks for confirmation. To reset the dividing point, select “No” and press ENTER, then repeat from step 4.
5 Select the character you want to enter using M/m/
3 Select “Edit,” and press ENTER. To return to the previous display Press O RETURN. Edit 10:10 AM Title List Create Playlist To turn off the display Timer Edit Playlist Press SYSTEM MENU. Edit Playing a Playlist title Dubbing 1 2 Disc Setting Setup 4 Select “Create Playlist,” and press ENTER. Press TITLE LIST. Press ORIGINAL/PLAYLIST to switch to the “Playlist” Title List. The display for creating a Playlist appears. “Start” is selected.
Renaming and erasing a Playlist title 1 2 Press TITLE LIST. Press ORIGINAL/PLAYLIST to switch to the “Playlist” Title List. Playlist 1/2 10:10 AM No. Title Length Edit 01 LINE 1 00:05:04 > 02 LINE 1 00:00:51 > Formatting/Renaming/ Protecting a Disc +RW +R -RWVR -RWVideo -RVR -RVideo The “Disc Setting” display allows you to check the disc information or change the disc name. Depending on the disc type, you can also format or set protection.
B “Disc Protect” (DVD+RWs/DVD-RWs (VR mode)/DVD-Rs (VR mode) only): Protects all titles on the disc when “Protected” is selected. To cancel the protection, select “Not Protected.” C “Disc Format” (DVD+RWs/DVDRWs/DVD-Rs only): Erases all contents of the disc, including protected titles, and makes a blank disc (except DVD-Rs). For DVD-RWs, select a recording format (“VR Mode” or “Video Mode”) according to your needs. To format unused DVD-Rs in VR mode, select “VR Mode” and then “OK.
Finalizing a Disc (Preparing a Disc for Playback on Other Equipment) Z OPEN/ CLOSE DVD 1 2 3 4 5 6 7 8 9 0 +RW -RWVR -RWVideo +R -RVR Finalizing is necessary in order to play discs recorded with this recorder on other DVD equipment. Note that you cannot further record or edit on a finalized disc. When you finalize a DVD+RW/DVD-RW (Video mode)/DVD+R/DVD-R (Video mode), a DVD menu will be automatically created, which can be displayed on other DVD equipment.
6 Select “Finalize,” and press ENTER. The display asks for confirmation again. Using the Auto Finalize function -RWVideo Disc will be finalized. Do you want to continue ? OK 7 Cancel Select “OK,” and press ENTER. The recorder starts finalizing the disc.
To stop playback Press x STOP. VCR Playback To eject the tape Playing a VHS Tape Press Z OPEN/CLOSE. To turn off the power while rewinding (Rewind Shut Off) Z OPEN/ CLOSE 1 2 3 4 5 6 7 8 9 "/1 VIDEO TRACKING +/– To use the time counter 0 DISPLAY H PLAY CLEAR 1 2 x STOP Press VIDEO to operate the VCR. Insert a tape. Playback starts automatically if you insert a tape with its safety tab removed. 3 Press H PLAY. The front panel display shows the playing time.
Adjusting the picture (tracking) You can manually adjust tracking if the recording quality is too poor to be remedied by the VCR’s automatic tracking (a tracking meter appears during the automatic tracking). Press TRACKING +/–. The tracking meter appears. Press TRACKING +/– repeatedly until the distortion disappears. Tracking To resume automatic tracking Press TRACKING + and TRACKING – on the recorder at the same time for more than ten seconds. Or, eject the tape and reinsert it.
Playback Options 1 2 3 4 5 6 7 8 9 0 REPLAY/ ADVANCE . PREV > NEXT H PLAY X PAUSE Button (fast reverse/fast forward) Operation • Fast reverses or fast forwards when pressed during stop mode. When you hold down during fast reverse or fast forward, you can view the picture. • Plays at high speed when briefly pressed during playback. When you hold down the button during playback, the high-speed play continues until you release the button. Plays in slow motion when pressed in pause mode.
Searching Using Various Functions Go to Zero 0:00:00 The VCR automatically marks the tape with an index signal at the point where each recording begins. You can easily find a specific point using various search functions. Note “End Search”: Searches for the beginning of a blank space. If no blank space is found, the tape will reach the end. During DVD recording, you cannot use VCR search functions.
Displaying the Playing Time and Play Information You can check playback information, such as elapsed or remaining time, recording mode, etc., on the TV screen. Viewing information on the front panel display You can view the information on the front panel display. Press TIME/TEXT repeatedly. The displays differ depending on the status. Example: When playing a tape Elapsed time 1 2 3 4 5 6 7 8 9 TIME/TEXT 0 Remaining tape length DISPLAY Clock Press DISPLAY during playback.
Selecting the Sound During Playback 1 2 3 4 5 6 7 8 9 0 AUDIO Press AUDIO repeatedly during playback. On-screen display Stereo Hi-Fi Left channel Left Right channel Right Monaural sound on the normal audio track Mono VCR Playback To listen to How sound is recorded on a video tape The VCR records sound onto two separate tracks. Hi-fi audio is recorded onto the main track along with the picture. Monaural sound is recorded onto the normal audio track along the edge of the tape.
Notes • Tapes recorded in EP (×3) mode by this VCR cannot be played back on VHS video decks with SP mode only. • Noise may appear in the image when tapes recorded in EP (×3) mode by this VCR are played back on other VHS video decks with EP mode. VCR Recording Before Recording Before you start recording… • This VCR records in VHS format, not S-VHS format. • Check that the tape is longer than the recording time (page 72).
VCR Recording From Connected Equipment Without the Timer (LINE1 or LINE2) by pressing INPUT, and then select the channel on the cable box/ satellite receiver’s side. 5 Press REC MODE repeatedly to select the recording mode, “SP” or “EP.” For details about the recording mode, see page 74. You can record TV programs on the recorder through the connected cable box/satellite receiver. 6 “REC” appears in the front panel display, and recording starts.
“c” and “OTR” light up, and the remaining recording time appears in the front panel display. When the time counter reaches “0:00,” the recorder stops recording and turns off. To cancel the Quick Timer Press z REC repeatedly until the counter appears in the front panel display. The recorder returns to normal recording mode. To stop recording Press x STOP twice. Checking the remaining tape length You can check recording information, such as remaining tape length or recording mode, etc.
VCR Timer Recording From Connected Equipment 3 Press TIMER. Timer – Standard NoNo.01 Rec To 01 You can set the timer for a total of 12 programs together with DVD and VCR timer recording, up to one month in advance. If you record from connected equipment that has a timer function, you can use the Synchro Rec function (page 80).
• If the c indicator flashes in the front panel display, check that a tape with its safety tab in place is inserted. • If timer settings overlap, a message appears. To change or cancel a timer recording, select “Edit” from the Timer List (page 79). 6 Press SYSTEM MENU to turn off the menu. There is no need to turn off the recorder before the timer recording starts.
Changing or Canceling VCR Timer Settings (Timer List) 4 Select the timer setting you want to change or cancel, and press ENTER. The sub-menu appears. Timer List You can change or cancel timer settings using the Timer List menu. 1 2 3 4 5 6 7 8 9 5 0 No.
• You cannot change the timer settings for a recording currently underway. • The Timer List displays both the DVD recorder and VCR timer settings. Recording From Connected Equipment With a Timer (Synchro Rec) You can set the recorder to automatically record programs from connected equipment that has a timer function (such as a satellite tuner). Connect the equipment to the LINE 1 IN (VIDEO/AUDIO) jacks on the rear of the recorder (page 13).
8 Select “to VIDEO,” and press ENTER. 9 Press SYSTEM MENU to turn off the menu. 10 Set the timer on the connected equipment to the time of the program you want to record, and turn it off. 11 Press SYNCHRO REC. The SYNC-REC indicator lights up in the front panel display and the recorder stands by for Synchro-Rec. The recorder starts recording when a signal is received from the connected equipment. When the connected equipment turns off, the recording stops and the recorder turns off.
Recording From Another VCR or Similar Device You can record from a connected VCR or similar device. For connection details, see “Connecting Another VCR or Similar Device” on page 27. VIDEO 1 2 3 4 5 6 7 8 9 INPUT 0 x STOP z REC REC MODE 1 2 3 Press VIDEO to operate the VCR. 4 Press REC MODE repeatedly to select the recording mode, “SP” or “EP.” 5 Insert the source tape into the connected equipment and set to playback pause.
TVIDEO Dubbing (TAPE y DVD) Dubbing From a VHS Tape to a DVD +RW -RWVR -RWVideo +R -RVR -RVideo You can easily record (dub) a VHS tape to a disc. Before dubbing, make the necessary audio settings on the VCR. ◆How titles and chapters are created The recorder takes each recording on the VHS tape and automatically divides them into titles as they are dubbed to a disc.
3 Select “Simple Dubbing,” and press ENTER. Dubbing 10:10 AM Title List Simple Dubbing VIDEO --> DVD Timer DV/D8 Dubbing DVD Edit --> VIDEO USB Dubbing Dubbing Dubbing From a DVD to a VHS Tape +RW -RWVR -RWVideo DVD RAM +R -RVR -RVideo Disc Setting Setup 4 Select “VIDEO t DVD,” and press ENTER. The display asks for confirmation. 5 Select “Yes,” and press ENTER. Dubbing starts. You can record (dub) a DVD title to a VHS tape.
4 Press TOP MENU or TITLE LIST to select a title. 5 Start playing the DVD, and then press x STOP or X PAUSE at the point where you want to start dubbing. To select DVD sound, language, or subtitle, press AUDIO or SUBTITLE during playback (see page 35). 6 Press DVD t on the recorder. Dubbing starts. To stop dubbing Press x STOP. Note that it may take a few seconds for the recorder to stop dubbing. To dub using the on-screen menu 1 2 After step 5 above, press SYSTEM MENU.
DV/D8 Dubbing (DV/D8 t DVD) Before DV/D8 Dubbing This section explains dubbing with a DV camcorder via the DV IN jack on the front panel. If you want to dub by way of the LINE IN jacks, see “Recording From Another VCR or Similar Device” on page 56. About the DV IN jack The DV IN jack on this recorder conforms to the i.LINK standard. You can connect any other equipment that has an i.LINK (DV) jack, and record digital signals. For more information about i.LINK, see “About i.LINK” on page 115.
Dubbing From a DV/D8 Format Tape to a DVD +RW -RWVR -RWVideo +R -RVR -RVideo ONE-TOUCH DUBBING You can simply record the entire contents of a DV/ D8 format tape onto a disc. The recorder controls the DV camcorder for the whole process. You can also select the scenes on the tape using the onscreen display. See “Dubbing selected scenes” on page 88.
5 Dubbing selected scenes Press
USB Dubbing (USB t DVD) Before USB Dubbing This section explains the following dubbing methods via the USB jack: • Dubbing all the video contents of the connected DVD camcorder to make a backup DVD (page 90). • Dubbing the selected video contents of the connected HDD camcorder to a DVD (page 91). • Copying JPEG image files to a DVD (page 93). Connecting to the USB jack You can connect a USB device (DVD camcorder, HDD camcorder, digital still camera, etc.) to the USB jack on the recorder.
Dubbing From a DVD Camcorder (DVD Backup) +RW -RWVR -RWVideo +R -RVideo ONE-TOUCH DUBBING You can dub all the contents of a DVD in the DVD camcorder to another DVD as a backup copy. Be sure to finalize a source DVD before dubbing. ◆Usable discs for backup DVDs Use a new or blank DVD of the same type as the source DVD.
3 Select “USB Dubbing,” and press ENTER. No Disc USB Dubbing Title List DVD Backup Timer HDD-Cam Program Dubbing Edit 10:10 AM Photo Copy Dubbing Dubbing From a HDD Camcorder (Program Dubbing) +RW -RWVideo +R -RVideo Disc Setting Setup 4 Select “DVD Backup,” and press ENTER. The display asks for confirmation. 5 Select “Start,” and press ENTER. The disc tray opens. 6 Place a recordable disc, and press Z OPEN/ CLOSE to close the disc tray. Dubbing starts.
8 Select an album (folder) and press ENTER. The movie file list appears. 9 A number indicating the order in which you selected the file appears. Repeat the step to select all the movie files you want to dub. You can select up to 9 files. ONE-TOUCH DUBBING 1 2 Select the movie file to dub, and press SET. Press DVD to operate the DVD recorder. USB Place a recordable disc on the disc tray. File Stop About inserting discs, see page 49 for details.
z Hints • You can also start dubbing from the System Menu. Press SYSTEM MENU to select “Dubbing,” and select “USB Dubbing.” Select “HDD-Cam Program Dubbing” and follow steps from 7 above. • The recorder can dub movie files that are recorded with an HDD camcorder and have the extension “.MPG.” • You cannot dub movie files recorded with a digital still camera. • To play the dubbed disc, press INPUT repeatedly to select the recorder’s input (LINE1 or LINE2).
Notes ONE-TOUCH DUBBING 1 2 Press DVD to operate the DVD recorder. Place a recordable disc on the disc tray. About inserting discs, see page 49 for details. 3 4 Press INPUT repeatedly to select “USB.” Connect the USB device to the jack on the recorder. (USB) Check that the USB indicator lights up on the front panel display. If not, check the operating instructions supplied with the connected device. 5 Press ONE-TOUCH DUBBING on the recorder.
5 Select “Photo Copy,” and press ENTER. Photo Copy 10:10 AM Title List Copy All Albums Timer Copy Album To stop copying Press ENTER to cancel. Note that it may take some time for the recorder to stop copying. To copy more albums on the same disc Edit Press SYSTEM MENU, and repeat from step 3 on page 94. Dubbing Disc Setting Setup If you copy all the albums, select “Copy All Albums” and go to step 8. 6 Select “Copy Album,” and press ENTER. The album list appears.
2 Select “Setup,” and press ENTER. The “Setup” display appears. Settings and Adjustments Setup Using the Setup Displays Timer Video Audio Features Dubbing Disc Setting Options Easy Setup Setup 3 Note Clock Set Edit By using the setup displays, you can make various adjustments to items such as picture and sound, as well as select a language for the subtitles. The setup displays are used in the following way.
Some items display a dialog box that requires additional settings. Example: When “Parental” in “Options” setup is selected. Create the password 10:10 AM Title List Timer Clock Setting (Clock Set) The “Clock Set” setup allows you to make clock settings for the recorder. 1 Press SYSTEM MENU while the recorder is in stop mode. 2 3 Select “Setup,” and press ENTER. Create the password. Edit Dubbing Disc Setting 5 Select “Clock Set,” and press ENTER. The clock setting display appears.
16:9 Video Settings (Video) The “Video” setup allows you to adjust items related to the image, such as size and color. Choose the settings according to the type of TV, tuner, or decoder connected to the recorder. 1 Press SYSTEM MENU while the recorder is in stop mode. 2 3 Select “Setup,” and press ENTER. 4:3 Pan Scan Select “Video,” and press ENTER. The “Video” setup appears with the following options. The default settings are underlined.
Black Level Selects the black level (setup level) for the video signals output from the LINE OUT jacks (page 15). This setting is not effective when the recorder outputs progressive signals. On Off Raises the standard black level. Select this when the picture appears too dark. Sets the black level of the output signal to the standard level. Picture Control Selects the picture control for the video signals output from the LINE OUT jacks (page 15).
Audio Settings (Audio) ◆ Dolby Digital (DVDs only) Selects the type of Dolby Digital signal. D-PCM Select this when the recorder is connected to an audio component lacking a built-in Dolby Digital decoder. You can select whether the signals conform to Dolby Surround or not by making adjustments to the “Downmix” item in “Audio” setup (page 101). Dolby Digital Select this when the recorder is connected to an audio component with a built-in Dolby Digital decoder.
Downmix (DVDs only) Audio (HDMI) (DVD VIDEOs only) Switches the method for mixing down to two channels when you play a DVD which has rear sound elements (channels) or is recorded in Dolby Digital format. For details on the rear signal components, see “A Connecting to audio L/R jacks” on page 19. This function affects the output of the following jacks: – LINE OUT (AUDIO L/R) jacks – AUDIO OUT L/R jacks – DIGITAL AUDIO OUT (COAXIAL)/HDMI OUT jack when “Dolby Digital” is set to “DPCM” (page 100).
DV/D8 Audio Input Stereo 1 Records original sound only. Normally select this when dubbing a DV format tape. Stereo 2 Records additional audio only. Mix Records both original and additional sounds. Note Select “Stereo 2” or “Mix” if you have added a second audio channel when recording with your DV camcorder. Line Audio Input When recording from equipment connected to the LINE 1 IN or LINE 2 IN jacks to a DVD disc in this recorder, select line input audio.
Format DVD-RW (DVD-RWs only) Selects the recording format for an unused DVDRW, when first inserted. VR Automatically formats the disc in VR mode. Video Automatically formats the disc in Video mode. Synchro Recording to DVD Sets the recorder to record programs from connected equipment that has a timer function (such as a satellite tuner) to a DVD disc. to VIDEO Sets the recorder to record programs from connected equipment that has a timer function (such as a satellite tuner) to a VHS tape.
◆ Ch. Digit lock Allows you to select whether to fix the digits for your cable box or satellite receiver. Off Select this when your cable box or satellite receiver only accepts a three or more digit channel number. Normally select this. Lock to 2 digits Select this only when your cable box or satellite receiver only accepts a two digit channel number. ◆ Mode for SET button Select “Mode 1” or “Mode 2” if your cable box or satellite receiver requires pressing an ENTER button or a SET button etc.
2 Parental (DVD VIDEOs only) Playback of some DVD VIDEOs can be limited according to a predetermined level, such as the age of the users. Scenes may be blocked or replaced with different scenes. 1 Select “Rating Level,” and press ENTER. The selection items for “Rating Level” are displayed. Parental After step 3 above, select “Parental,” and press ENTER. • If you have not entered a password, the display for registering a new password appears. Enter a 4-digit password using the number buttons.
Front Display Adjusts the lighting of the front panel display. Auto Adjusts to low lighting when power is off. Bright Maintains bright lighting when power is off. Dimmer Maintains low lighting regardless of whether power is on or off. Off Turns off the lighting when power is off. Maintains the lighting when power is on. Easy Setup (Resetting the Recorder) Select this to run the Easy Setup program. 1 Press SYSTEM MENU while the recorder is in stop mode. 2 3 Select “Setup,” and press ENTER.
Additional Information Troubleshooting If you experience any of the following difficulties while using the recorder, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Power The power does not turn on. , Check that the AC power cord is connected securely. The recorder turns on automatically. , HDMI input is selected using TV Interface. Some TV has this function for Control for HDMI.
The playback picture or TV program from the equipment connected through the recorder is distorted. , If the playback picture output from a DVD player, VCR, or tuner goes through your recorder before reaching your TV, the copy-protection signal applied to some programs could affect picture quality. Disconnect the playback equipment in question and connect it directly to your TV. The picture does not fill the screen. , Set “TV Type” in the “Video” setup to fit the aspect ratio of your TV (page 98).
Some functions such as Stop, Search, or Slowmotion Play cannot be performed. , Depending on the disc, you may not be able to do some of the operations above. See the instruction manual supplied with the disc. , While the recorder is reading disc information, playback operations will not work. The language for the soundtrack cannot be changed. , Multilingual tracks are not recorded on the disc being played. , The DVD VIDEO prohibits the changing of the language for the soundtrack.
Recording does not stop immediately after x STOP is pressed. , It will take a few seconds for the recorder to input disc data before recording can stop. Timer recording is not complete or did not start from the beginning. , There was a power failure during recording. , The recorder’s internal clock stopped due to a power failure that lasted for more than 30 minutes. Reset the clock (page 97). , The channel or input changed from the one you are recording.
VCR Timer recording The timer does not operate. , , , , , , , , , , Check that the clock is correctly set. Make sure a tape has been inserted. Check that the safety tab has not been removed. Make sure the tape is not at its end. Make sure a program has been set for timer recording. Make sure the timer settings are set for a future time. Check that the cable box is turned on. “- -:- -” appears in the front panel display if the recorder is disconnected from the wall outlet for more than 30 minutes.
“Cannot record because of high temperature.” appears on the TV screen. , Check that the vent on the rear of the recorder is not blocked. Then, turn off the recorder, wait until the clock appears in the front panel display, and disconnect the AC power cord. Leave the recorder off for a while, then re-connect the power cord, and press "/1 on the recorder. “CHILD LOCK” appears in the front panel display. , The recorder is locked. Cancel the Child Lock (page 37). Control by AV mouse is not possible.
– A disc that has a non-standard shape (e.g., card, heart). – A disc with a label or sticker on it. – A disc that has cellophane tape or sticker adhesive on it. Symptoms caused by contaminated video heads Specifications System [DVD recorder section] Laser Semiconductor laser Audio recording format Dolby Digital Video recording format initial contamination terminal When the video heads are dirty, the picture is distorted or the tape cannot be played.
Inputs and outputs General LINE 1 IN and LINE 2 IN Power requirements VIDEO IN, phono jack (1 each) Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO IN, phono jacks (2 each) Input level: 327 mVrms Input impedance: more than 47 kilohms S VIDEO, 4-pin, mini-DIN jack Y: 1.0 Vp-p, unbalanced, sync negative C: 0.286 Vp-p, load impedance 75 ohms DV IN, 4-pin jack, i.
About i.LINK The DV IN jack on this recorder is an i.LINKcompliant DV IN jack. This section describes the i.LINK standard and its features. What is i.LINK? i.LINK is a digital serial interface for handling digital video, digital audio and other data in two directions between equipment having the i.LINK jack, and for controlling other equipment. i.LINK-compatible pieces of equipment can be connected by a single i.LINK cable.
Guide to Parts and Controls For more information, see the pages in parentheses. Front panel Buttons on the recorder have the same function as the buttons on the remote if they have the same or similar names.
Remote I .
A Z OPEN/CLOSE (eject) button (68) For VCR functions B Number buttons*1 (21) SET button (104) 1 2 3 C SYSTEM MENU button (10) 4 5 6 D DISPLAY button (72) 7 8 9 E O RETURN button (23) 0 F .
Front panel display DVD DUB VCD RW VR SYNC- REC HDMI DUB VIDEO USB A DVD playing/recording status H Timer indicator B DUB (DVD T VIDEO) indicator (83) DUB (DVD t VIDEO) indicator (84) I Displays the following (41, 72): C Disc type/recording format D SYNC-REC indicator (54, 80) E HDMI indicator (16) F VIDEO playing/recording status G Tape indicator • • • • • Playing time/remaining time Current title/chapter/track/index number Recording time/recording mode Clock Channel J USB indicator (89) K D
DVD Audio/Subtitle Language When you play a DVD VIDEO, the language of the selected audio track or subtitle is abbreviated as follows. See page 104 to change the audio track or subtitle.
Cable Box/Satellite Receiver Brand Code When you want to use the set top box control function, find the brand code number of your cable box/satellite receiver from the list and enter it in step 7 of Easy Setup (page 23). If more than one code number is listed, try entering them one at a time until you find the one that works with your cable box/satellite receiver.
Cable box brand Code number Cable box brand Code number Garrard 0153 Maestro 0812 Gateway 0764 Magnavox GC Electronics 0207, 0056, 0330, 0016, 0040, 0077, 0030 0797, 0027, 0032, 0334, 0069 Millennium 0618, 0153 GE 0232, 0233, 0144, 0021 Memorex 0000 Gemini 0015, 0070, 0057, 0242, 0014, 0797, 0013, 0400 Mitsubishi 0003 Motorola 0476, 0276, 1476, 0810, 1376, 1254, 0400, 1106 General Instrument 122US 0476, 0011, 0014, 0098, 0810, 0024, 0003, 0015, 0276 GHZ 0078 Gibraltar 0003 G
Cable box brand Code number Cable box brand Code number Popular Mechanics 0400 Sony 1006 Prelude 0770 Spectradyne 0769, 0058 Prism 0012, 0013, 0059 Spectravision 0058 Protelcon 0786 Sprucer 0021, 0307, 0010, 0144 Pulsar 0000, 0040 Standard Components 0203, 0096, 0155 Quasar 0000 Starcom Quest 0144, 0020 0003, 0015, 0047, 0014, 0098, 0305 R Line 0040 Stargate 0015, 0040, 0770, 0865, 0797, 0305, 0014 RadioShack 0883, 0015, 0315, 0303, 0797 Starquest 0015 Rampage 0255 St
Cable box brand Code number Tusa 0015 TV COMM 0035, 0019 TV Guide 1476 TV86 0063, 0040 Uniden 0022, 0225 Unika 0207, 0153, 0022 United Artists 0007 United Cable 0003, 0014, 0011, 0276 Universal 0191, 0078, 0207, 0056, 0022, 0039, 0153, 0077, 0322, 0315 US Electronics 0276, 0008, 0003, 0017 V2 0883 Verizon 0246 Videoway 0250, 0000 VideoWorks 0124 Vidtech 0244 Viewmaster 0883, 0770 Viewstar 0258, 0289, 0060, 0063, 0211, 0027, 0111, 0030, 0121 Code number AlphaStar 0772 A
Satellite receiver brand Code number Paysat 0724 Philips 1076, 0099, 1142, 0724, 0722, 0749, 1442, 1749, 0856, 0775 Primestar 0361, 0627, 0869 Proscan 0392, 0566 QNS 1367 RadioShack 0869 RCA 0566, 0392, 0143, 0855 Samsung 1109, 1276 Sky 0856, 0099, 1856 Sony 0639, 1639 Star Choice 0869 Star Trak 0869, 0772 Thomson 0566, 0392 Tivo 1142, 1442 Toshiba 0790, 0749, 1749, 1285 UEC 1333, 1358 Uniden 0724, 0722 Video Cipher II Plus 0361 Zenith 0856, 1856 Additional Informatio
Index Words in quotations appear in the on-screen displays. Numerics 16:9 24, 98 4:3 Letter Box 24, 98 4:3 Pan Scan 24, 98 A “A-B Erase” 59 ADVANCE 35, 70 ANGLE 35 AUDIO 35, 73 “Audio” 104 “Audio (HDMI)” 101 Audio cords 18 “Audio DRC” 101 Audio settings 100 Auto Finalize 67, 103 “Auto Play” 103 “Auto Repeat” 103 B Batteries 20 “Black Level” 99 “Brand Code” 103 C Cable box 13 Cable box brand 121 Cable box brand code 121 “Ch.
M Q MENU 34 Menu Top menu 34 “Mode for SET button” 104 MP3 audio tracks 41 Quick Timer 50, 75 N NEXT 35, 70 Number buttons 21, 39 O ONE-TOUCH DUBBING 87, 90, 91, 93 On-screen display OPTIONS menu 11 Setup Display 96 Sub-menu 11 System Menu 10 OPTIONS 11 Options settings 104 Original 39 ORIGINAL/PLAYLIST 39, 58 “OSD” language 24, 104 P “Parental” 105 Parental Control 37 Parts and controls 116 PAUSE 36, 49, 70, 75 PBC 37 “Photo Copy” 95 “Picture Control” 99 PLAY 34, 68 Playable discs 32 Playback 34, 68
Índice Este manual muestra la configuración básica y el funcionamiento de la videograbadora-grabadora de DVD. Para obtener más información, consulte el manual de instrucciones en inglés. Conexiones y ajustes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Conexión de la grabadora . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Paso 1: Desembalaje. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Conexiones y ajustes Conexión de la grabadora Notas • Enchufe los cables firmemente para prevenir perturbaciones no deseadas. • Consulte las instrucciones suministradas con los componentes que va a conectar. • No es posible conectar la grabadora a un televisor que no disponga de toma de entrada de video. • Asegúrese de desconectar el cable de alimentación de cada componente antes de realizar las conexiones.
Conexión del decodificador de cable/receptor vía satélite y del controlador del decodificador Conecte las tomas LINE 1 IN mediante un cable de audio/video. Con esta conexión, puede grabar cualquier canal del decodificador de cable o receptor vía satélite. Asegúrese de que el receptor vía satélite o decodificador de cable está encendido.
Utilización de un cable de video S para disfrutar de una calidad de imagen superior Conecte la toma LINE 1 IN S VIDEO mediante un cable de video S (no suministrado) en lugar de la clavija amarilla (video) del cable de audio/video. Deje las clavijas de audio conectadas a las tomas AUDIO L/R. Cuando utilice esta conexión, presione SYSTEM MENU y ajuste “Entrada línea 1” en “Video S” en la configuración de “Video” después de haber completado Configuración fácil (página 10).
Paso 3: Conexión al televisor Conecte el cable de audio/video suministrado a las tomas LINE OUT (VIDEO/AUDIO L/R) de la grabadora. Si su televisor tiene una toma HDMI, o tomas de entrada de video componente, consulte la página 7 o 8.
Si el televisor dispone de una toma de entrada de HDMI * Esta grabadora de DVD incorpora la tecnología de High-Definition Multimedia Interface (HDMI™). HDMI, el logotipo de HDMI y High-Definition Multimedia Interface son marcas comerciales o marcas comerciales registradas de HDMI Licensing LLC. Conexiones y ajustes Conecte la toma de salida HDMI* OUT mediante un cable Sony HDMI certificado (no suministrado). Disfrutará de imágenes y sonido de alta calidad.
Si el televisor tiene tomas de entrada de video componente Conecte las tomas COMPONENT VIDEO OUT mediante un cable de video componente (no suministrado) o tres cables de video (no suministrados) del mismo tipo y longitud. Disfrutará de una fiel reproducción del color y de imágenes de alta calidad. Si utiliza esta conexión, asegúrese de conectar el cable de audio a las tomas LINE OUT (AUDIO L/R).
Paso 5: Preparación del mando a distancia Enchufe los cables de alimentación de la grabadora y del televisor a una toma de ca. A continuación, debe esperar unos instantes antes de utilizar la grabadora. Podrá utilizarla sólo después de que la pantalla del panel frontal se ilumine y la grabadora pase al modo de espera. La grabadora puede controlarse con el mando a distancia suministrado.
Paso 6: Configuración fácil 3 Aparecerá el siguiente mensaje “Initial settings necessary to operate the DVD recorder will be made. You can change them later using setup.” (“Se realizarán los ajustes iniciales necesarios para usar la grabadora DVD. Podrá cambiarlos posteriormente utilizando la configuración.”). • Si no aparece este mensaje, presione SYSTEM MENU y seleccione “Configuración fácil” en la pantalla “Configuración” para ejecutar la Configuración fácil.
7 Presione los botones numéricos para introducir el código de marca del decodificador de cable/receptor vía satélite. 10 Seleccione el ajuste que coincida con su tipo de televisor. No Disc Consulte “Cable Box/Satellite Receiver Brand Code” en el manual de instrucciones en inglés (página 121). Configuración fácil 10:10 AM Seleccione el tipo de pantalla de su TV. 4 : 3 Tipo buzón No Disc 4 : 3 Explo pan Configuración fácil Introduzca el código de marca del decodificador.
Nota Para grabar programas de televisión utilizando el temporizador, deberá ajustar el reloj con exactitud. Comprobar el ajuste de control del decodificador de cable/receptor vía satélite 1 Encienda la grabadora y el decodificador de cable/receptor vía satélite. 2 Oriente el mando a distancia de la grabadora hacia ésta (no hacia el decodificador de cable/receptor vía satélite). 3 Presione CH +/– y compruebe que el canal cambia en la ventana del decodificador de cable/receptor vía satélite.
Reproducción de DVD Reproducción de discos +RW -RWVR -RWVideo DVD RAM VCD Z OPEN/ CLOSE DVD 1 2 3 4 5 6 7 8 9 -RVR -RVideo DATA CD DATA DVD Nota Para reproducir un disco grabado con otro equipo en esta grabadora, primero finalice el disco en el equipo de grabación.
Opciones de reproducción Z OPEN/CLOSE ANGLE REPLAY/ ADVANCE . PREV 1 2 3 4 5 6 7 8 9 0 SUBTITLE AUDIO > NEXT H PLAY X PAUSE Botón Operación Disco Z OPEN/CLOSE Detiene la reproducción y abre la bandeja de discos. Todos los discos AUDIO Selecciona una de las pistas de audio grabadas en el disco cuando se presiona varias veces. -RWVR -RVR : selecciona el sonido principal o secundario. -RWVR -RVR DVD VCD DVD : selecciona la fuente de audio.
Botón Operación Disco . PREV/ > NEXT • Se desplaza al principio del título/capítulo/escena/ pista actual o siguiente e inicia la reproducción cuando se presiona durante la reproducción. • Se desplaza al principio del título/capítulo/escena/ pista anterior si se presiona .PREV en los 3 segundos posteriores al inicio de un título/capítulo/ escena/pista. Todos los discos Avanza o retrocede rápidamente el disco cuando se presiona durante la reproducción.
C Información del título: Reproducción de un título de la Lista títulos +RW -RWVR -RWVideo RAM +R Muestra el número del título, su nombre, la fecha y el modo de grabación. “ ” indica que se trata de un título protegido, mientras que “ ” indica que está desprotegido. -RVideo -RVR El menú Lista títulos muestra los títulos de los programas del disco. D Reloj 4 Seleccione el título y presione ENTER. Aparece el submenú.
Modo de grabación y tiempo de grabación La siguiente tabla es una guía aproximada del tiempo de grabación en un DVD (4,7 GB). Grabación de DVD Antes de grabar Modo de grabación Tiempo de grabación (minutos) aproximado HQ (alta calidad) 60 Antes de empezar la grabación… Compruebe que la grabadora está conectada a un sintonizador como, por ejemplo, un decodificador de cable o receptor vía satélite (página 3). Consulte también el manual de instrucciones del sintonizador.
Imágenes que no pueden grabarse En esta grabadora no pueden grabarse imágenes con protección contra copias. La grabación se detiene cuando se detecta una señal de protección contra copias.
5 Presione CH +/– o INPUT varias veces para seleccionar el canal o la fuente de entrada que desee grabar. 6 Presione REC MODE varias veces para seleccionar el modo de grabación. La pantalla cambiará en la pantalla del televisor del modo siguiente: HQ HSP SP LSP SLP EP LP ESP Para obtener más detalles sobre el modo de grabación, consulte la página 17.
Grabación con temporizador de DVD desde un equipo conectado +RW -RWVR -RWVideo +R -RVR 3 Espere hasta que “LOAD” desaparezca de la pantalla del panel frontal. 4 Temporizador – Estándar No Rec To No.01 01 No opere el decodificador de cable ni el receptor vía satélite justo antes ni durante una grabación con temporizador, ya que ello puede impedir la grabación correcta de un programa. 2 3 4 5 6 7 8 9 0 SYSTEM MENU TIMER M/m/
F “Modo”: selecciona el modo de grabación (página 17). Para utilizar la función Ajustar modo grab. (página 21), seleccione “AUTO”. Si se equivoca, seleccione el elemento y cambie el ajuste. 6 Presione ENTER. 7 Presione SYSTEM MENU para quitar el menú. No es necesario apagar la grabadora antes de que empiece la grabación con temporizador. Deje el decodificador de cable/receptor vía satélite encendido y no cambie el canal seleccionado hasta que la grabadora finalice la grabación con temporizador.
Para detener la reproducción Reproducción de la videograbadora Presione x STOP. Para expulsar la cinta Reproducción de una cinta VHS Z OPEN/ CLOSE 1 2 3 4 5 6 7 8 9 "/1 VIDEO Presione Z OPEN/CLOSE. Para desconectar la alimentación durante el rebobinado (parada del rebobinado) Presione "/1 mientras la cinta se está rebobinando. La alimentación se desactivará pero la cinta seguirá rebobinándose hasta que llegue al final.
Opciones de reproducción 1 2 3 4 5 6 7 8 9 0 REPLAY/ ADVANCE . PREV > NEXT H PLAY X PAUSE (retroceso rápido/avance rápido) Operación • Avanza o retrocede rápidamente si se presiona durante el modo de detención. Si mantiene presionado el botón durante el avance o retroceso rápido, podrá ver la imagen. • Reproduce a alta velocidad cuando se presiona brevemente durante la reproducción.
Notas Grabación de la videograbadora Antes de grabar Antes de empezar la grabación… Compruebe que la grabadora está conectada a un sintonizador como, por ejemplo, un decodificador de cable o receptor vía satélite (página 3). Consulte también el manual de instrucciones del sintonizador. Nota La grabadora dispone de función de protección contra copia. Los programas que incluyen señales de protección contra copias del tipo Copy-Never no pueden grabarse correctamente en la videograbadora.
Grabación de la videograbadora desde un equipo conectado que no tiene temporizador 4 • Cuando utilice el control de decodificador de cable/receptor vía satélite, seleccione el canal presionando CH +/– en el mando a distancia de esta grabadora. La entrada de la grabadora se cambia a la entrada conectada (LINE1 o LINE2). También es posible utilizar los botones numéricos.
Grabación mediante la función Quick Timer (Grabación con temporizador presionando un solo botón) Puede ajustar la grabadora para que grabe en incrementos de 30 minutos. 1 2 Presione VIDEO para utilizar la videograbadora. Presione z REC varias veces para definir la duración. Cada vez que se presione el botón, el tiempo aumentará en 30 minutos, hasta un máximo de seis horas.
3 5 Presione TIMER. Temporizador – Estándar NoNo.01 Rec To Date Start 01 4/15 09:00PM VHS 02 Sop. VHS End 4/30 Inicio 09:15PM Fin 09:45PM Fecha --:-- CH8 CH11 Can Modo ---Línea1 --SP --VCR --/-Hoy 04 --- --/-- --:-- --:-- ---- --- 05 --- --/-- --:-- --:-- ---- --- 06 --- --/-- --:-- --:-- ---- --- : 00 PM 10 --:-: 00 PM Source Mode Edit. 03 09 Aparecerá el menú Lista de temporizador.
1 Para seleccionar el modo de grabación, presione REC MODE varias veces (consulte la página 17). Copiado (CINTA y DVD) Copiado de una cinta VHS a un DVD +RW -RWVR -RWVideo +R -RVR -RVideo 2 3 Inserte una cinta VHS de origen. 4 Inicie la reproducción de la cinta VHS y, a continuación, presione x STOP o X PAUSE en el punto en el que desee iniciar el proceso de copiado. Puede grabar (copiar) fácilmente una cinta VHS en un disco.
4 5 Seleccione “VIDEO t DVD” y presione ENTER. La pantalla solicita confirmación. Seleccione “Sí” y presione ENTER. Comienza el copiado. z Observaciones • Si aparece una pantalla negra (sin señal) al final del disco copiado, no se trata de un mal funcionamiento. Esta pantalla se graba si existen diferencias entre el tiempo del disco y de la cinta al detener la grabación.
2 3 Inserte un disco de origen. 4 Presione TOP MENU o TITLE LIST para seleccionar un título. 5 Inicie la reproducción del DVD y, a continuación, presione x STOP o X PAUSE en el punto en el que desee iniciar el proceso de copiado. Presione DVD para utilizar la grabadora de DVD. Para seleccionar el sonido, idioma o los subtítulos del DVD, presione AUDIO o SUBTITLE durante la reproducción (consulte la página 14). 6 Presione DVD t en la grabadora. Comienza el copiado.
Sony Corporation Printed in China AK68-01723A
