DVD Player User Manual 1
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOTEXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns the user of uninsulated voltage within the unit that can cause dangerous electric shocks. This symbol alerts the user that there are important operating and maintenance instruction in the literature accompanying this unit.
IMPORTANT SAFETY INSTRUCTION READ THE SAFETY AND OPERATING INSTRUCTION before operating your DVD player FOLLOW INSTRUCTIONS AND HEED ALL WARNINGS on your DVD player in this manual. 1. Save these instructions for later use 2. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 3. Do not use this DVD player near water 4. Do not place this DVD player on an unstable cart, stand or table.
FEATURES Package Contents p p Main Unit 1 p Remote control unit 1 p Batteries (R6 AA) 2 p Video and Stereo sound Compatible with Video CD, CD, Super VCD, and CVD as well as DVD-video This DVD player can playback not only the Video CD, CD, and DVD-video but also the super VCD and CVD, which are popular in China. In addition, it also can playback the MP3 audio recorded in CD-ROM.
INDEX Defaults ................................................................................18 FEATURES .................................................................................. 1 ON-SCREEN DISPLAY (OSD) ...............................................19 PACKAGE CONTENTS ............................................................ 2 DVD OSD MODES ..............................................................19 INDEX................................................................................
Precautions Please read the followings carefully so that this DVD p Location player can be used correctly and safely.
be weakened. The poor the signal quality, the poor p Disc usage 1 Please hold all discs by their edges or the center disc clean by wiping straight out from the center with opening as shown below. Do not touch the shiny a dry soft cloth. the playback performance. Therefore, do keep the signal surface of the discs. 1 1 Do not stick labels or tapes on the discs, and do not 1 scratch or damage the discs.
BACKGROUND INFORMATION This DVD player can play the following types of discs Disc type/Logo Dimension/side/layer Max. playback time(storage capacity) DVD Video DVD 12 cm/single sided/single layer 12 cm/single sided/double layer 12 cm/double sided/single layer 12 cm/double sided/double layer MPEG2 TYPE 133 min. (4.7 GB) 242 min. (8.5 GB) 266 min. (9.4 GB) 484 min. (17 GB) 8 cm/single sided/single layer 8 cm/single sided/double layer 8 cm/double sided/single layer 8 cm/double sided/double layer 41 min.
Front panel/Display window p Front panel 1. Headphone volume level control 2. 3. 9. Adjust the volume level of the headphone Go to the previous chapter/track during playback Headphone jack DVD/VCD/CD. However, it works as “Go to the Connect the headphone previous page” in the PBC menu of VCD disc. Display window 10. PLAY button Display the operation information 4. Disc tray 5. OPEN/CLOSE button Play the inserted disc. 11. STOP button Stop playback Open/close the disc tray 6. 7. 12.
p Display window 1. CD/VCD indicator 2. PBC indicator for VCD disc 3. DVD indicator 4. Operation status indicator - playback 5. Operation status indicator – pause or stop 6. Title number indicator 7. Chapter/track number indicator 8. Elapsed playback time / remaining playback time indicator 9. Multi-angle indicator 10. Dolby AC-3 audio indicator 11. Repeat playback mode indicator 12. Random playback indicator 13. Program playback indicator 14.
Remote Control Unit In order to use the remote control unit to operate the DVD i When the remote control unit does not function player, please insert two R6 batteries (size AA) into the correctly or its operation range reduces, please remote control unit. Make sure that the + and – ends of replace both batteries at the same time. i If the remote control unit will be not used for a long the batteries are matched to the +/- marks inside the battery compartment.
19. button POWER Fast reverse playback during playback Turn on/off the DVD player unit 2. 20. button SETUP 21. button DISPLAY OPEN/CLOSE 22. button 23. button SEARCH 24. button ANGLE 25. button AUDIO 26. button SUB-T 27. button PBC/MENU 28. 29. Enter the title menu for DVD disc. Refer to p.23. 11. RETURN PREV NEXT button ENTER button 31. 5 32. 6 button Move downward on the menu window 17. 3 button Move left on the menu window 18.
REAR PANEL AND CONNECTIONS p Rear panel There are the following AV output terminals in the rear panel 1 1 Video output terminals including ü 0ne Y/Cb/Cr Component-video terminal Œ ü One S-video terminal • ü One composite video terminal. Ž Audio output terminals including ü One with two jacks for stereo sound • ü One terminal with six RCA jacks for Dolby AC3 5.
p Video Connection 1 Y/Cb/Cr component video output terminal can be connected to the TV set equipped with a component video input terminal for the best possible picture quality Œ. i Whenever the component video output terminal is equipped for display, please set the VIDEO OUT setting to Y/CR/CB in the initial setting (Refer to p. 13) 1 S-Video output terminal can be connected to the TV set equipped with an S-video input terminal for the better possible picture quality.
INITIAL SETTING Press the SETUP button on the remote control into the initial setting, while the OSD for initial setting will be --GENERAL PAGE— displayed as follows, 4:3 4:3 16:9 TV DISPLAY >> ANGLE MARK OSD LANGUAGE AUDIO OUTPUT VIDEO OUT SCART OUT SCREEN SAVER SETUP MENU – MAIN PAGE 4GENERAL SETUP 4SPEAKER SETUP 4DIGITAL AUDIO OUT 4PREFERENCES GENERAL SETUP 3EXIT SETUP 1 4:3 4:3 pan & scan video output for normal TV set GOTO SPEAKER SETUP PAGE 1 4:3 4:3 letter box video output for normal T
When S-video terminals is used to connect with TV, set VIDEO OUTPUT at "S-VIDEO" 1 When Component video terminal is used, set VIDEO OUTPUT at "Y/CB/CR" 1 When composite video terminal is used, any setting of VIDEO OUTPUT is available. 1 When SCART terminal is used, if VIDEO OUTPUT is set at "S-VIDEO" or "Y/CB/CR", the composite video is output from the SCART terminal. If VIDEO OUTPUT is set at " SCART", the video output from the SCART terminal can be set by SCART OUT setting as shown below.
Screen Saver When this DVD player is idle such as stop, stay at setup menu, or no disc inserted, the screen saver can be triggered to prolong the TV life-time. SPEAKER SETUP PAGE – CNTR SPEAKER >> REAR SPEAKER SUBWOOFER CNTR DELAY REAR DELAY ON OFF 3MAIN PAGE --GENERAL PAGE— TV DISPLAY ANGLE MARK OSD LANGUAGE AUDIO OUTPUT VIDEO OUT SCART OUT SCREEN SAVER>> SETUP CENTER SPEAKER Rear Speaker ON OFF Enable/Disable the surround channels output.
Center Delay This unit supports the center time delay range of 0 to 5 ms in 1ms steps. Disc Audio encoding format Digital output format DVD Dolby Digital (AC-3) SPEAKER SETUP PAGE – CNTR SPEAKER REAR SPEAKER SUBWOOFER CNTR DELAY >> REAR DELAY Bit stream(2-5.
Audio Parental This unit supports five audio selections, as shown below, for your preferred default audio.
-- PREFERENCESPAGE – PASSWORD CHANGE PAGE AUDIO SUBTITLE DISC MENU PARENTAL PASSWORD DEFAULTS OLD PASSWORD NEW PASSWORD CONFIRM PASSOWRD RESET 3MAIN PAGE LOAD FACTORY SETTINGS PLASE ENTER OLD PASSWORD Defaults When you select “RESET’, all the initial setting will be reset to the default setting.
ON-SCREEN DISPLAY (OSD) p DVD OSD modes Whenever the DISPLAY TITLE 002/04 CHAPTER 02/05 SUBTITLE 01/06:ENGLISH AUDIO 1/4:AC-3 2CH ENGLISH button is pressed, the OSD mode changes among the following modes: Mode 1 Only the status of pressed button and some special TIME 00:10:00 playback messages are displayed. The OSD message lasts only three seconds.
BASIC OPERATION Preparation: 1 the current track or chapter. If you use a television set, turn on its power and set p the TV/Video switch to “Video”. 1 Still/Pause playback If a sound system is used, the amplifier must be Pause playback is only available during the playback of a turned on first and make sure that its outputs are set CD-DA. properly. l Pressing the button during the playback STILL/STEP of a CD-DA, the playback will be paused.
p Slow-motion forward/reverse playback Press the SLOW 1 VCD Whenever the button can trigger the slow-motion SLOW button is pressed, the forward/reverse playback. slow-motion playback is triggered in speed circles of 1 fwd 1/2 Õ fwd 1/4Õ fwd 1/8Õ fwd1/2. DVD Whenever the SLOW 1 button is pressed, the Pressing the PLAY or ENTER button, the normal playback can be resumed.
Advanced Operation after another track is finished. p Repeated playback Whenever the 1/ALL 1 button is pressed, the repeated 1 “ ü ü 1”, “ ALL”, and “ “RANDOM OFF” is displayed and lasts few seconds. OFF”. p 1” Program playback Trigger the repeated playback of a chapter for a The program playback is only available for a CD-DA or a DVD disc. VCD with PBC off. Trigger the repeated playback of a track for a CD disc or a VCD disc.
the current time in the memory and, then, the position will be numbered. PROGRAM P06:03 MARK 1 2 3 + + PRESS ENTER TO SETUP MEMORY Start/Cancel the program playback 1 Press the PLAY button to start the program Playback/Cancel marker 1 When you press the 3 or 4 button to select a numbered position, the mark menu becomes playback in order that you program. 1 Press the STOP button to cancel the program playback and the program order is reset.
p Title Menu (DVD only) 1 Use the 5 , 3 , 6 , 4 buttons to control the Some of DVD discs has a title menu recorded on it used to select title for playback. The operation details for the title menu depends on the disc. 1 Press the TITLE button during playback to title menu. Pressing the TITLE button again resumes the playback of the scene when the TITLE button was first pressed. For example, direction and press the ENTER or PLAY button to select the preferred item.
p Changing subtitle during playback During playback of a DVD disc with more than two subtitle languages, you can change the subtitle or disable the subtitle by press the 1 Press the SUBTITLE 1 Whenever the button. button is pressed, the audio AUDIO for playback will change in circles among the available audio numbers. button and the subtitle OSD message will appear to show the current subtitle number. If no selection is made, this message will disappear automatically after 3 seconds.
p VCD’s playback control (PBC) This function is only available for the playback of a Video-CD Ver. 2.0 or more. The PBC operation may be different by disc. Therefore, please refer to all explanations in each disc package. MENU/PBC Press the button MENU/PBC button to switch on/off the PBC function, while the OSD messages “PBC ON” and “PBC OFF” will be displayed, respectively.
TROUBLESHOOTING Before requesting service for this unit, please check the following chart for a possible cause of the problem you are experiencing. Some simple checks or minor adjustment on your AV system may eliminate the problem and resume proper operation. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, consult your dealer for instructions.
SPECIFICATION Power requirement Power consumption Weight Dimensions (W x D x H) Operating temperature range Operating humidity range AC 100~240 V, 50/60 Hz 26 W ( approx. 6W at standby mode) 4.2Kg 430x310x86 (mm) +5 to 40 °C 5 to 90 % (no condensation) Video system Component video terminal R output level G output level B output level NTSC 525/60 Hz or PAL 625/50 Hz 1 Vp-p (75 Ω) 0.7 Vp-p (75 Ω) 0.7 Vp-p(75 Ω) 1 Vp-p (75 Ω) 0.286 Vp-p (75 Ω) 1 Vp-p (75 Ω) 0.7 Vp-p (75 Ω) 0.7 Vp-p (75 Ω) 0.
Region Management Information This DVD player is designed and manufactured to respond to the Region Management Information recorded on a DVD disc. If the region number described on the DVD disc does not correspond to the region number of this DVD player, this DVD player will not playback this disc, while the OSD message “WRONG REGION” will show on the screen.
