Owner manual

Dimensions: flow meters with electronic registration
Note: Dimensions shown are not for construction use. Consult factory when certified
engineering prints are required.
Construction and application classes
LC series M and MA PD meters are suitable for
metering a broad range of products as listed below.
The appropriate meter class can be used to specify a
desired meter by using the table on the next page of
this publication.
Class Description
Bearing
Material
1 Refined petroleum products Ni-Resist
2 Aviation and jet fuel Ni-Resist
3
Variety of product includes:
liquid sugars, sweeteners,
syrups, vegetable oils
Ni-Resist
4
Treated waters and solvents
where no red metals are
allowed
Carbon
8
Acid pH liquids includes: nitric,
phosphoric, glacial acetic acids,
citric juices, vinegar
Carbon
14 Crude oil Ni-Resist
16 General solvents Carbon
30 Herbicides Carbon
Model
Flange
size
Max nom.
Flow rate
Working
pressure
Net
weight
Dimensions
A B C D E F
M-40 4”
1700 l/min
(449 GPM)
10,5 bar
(150 PSI)
54,4 kg
(120 lbs)
in 20.5 10.6 5.6 9.1 .87 4.8
mm 521 270 143 230 22 122
Dimensions
G H I J K L M N O
in 7.9 n/a 13.8 19.4 1.4 7.1 12.3 6.6 7.7
mm 200 n/a 351 494 36 181 313 167 195