Technical data

ManualsBrandsSammic ManualsKitchen AppliancesFP

INSTRUCCIONES - USERS MANUAL - GEBRAUCHSANWEISUNG -

MODE D’EMPLOI - INSTRUZIONI PER L’USO - MANUAL DE INSTRUÇÕES

H o r n o s p i z z a

P i z z a o v e n

F o u r p i z z a

F o r n o s p i z z a

Summary of content (7 pages)

PAGE 1
Hornos pizza Pizza oven FP Four pizza Fornos pizza INSTRUCCIONES - USERS MANUAL - GEBRAUCHSANWEISUNG MODE D’EMPLOI - INSTRUZIONI PER L’USO - MANUAL DE INSTRUÇÕES
PAGE 2
1. OVEN INSTALLATION Carry the oven, complete with its support, if any, to the place of installation. Make sure there is enough clearance around the appliance for proper ventilation and cleaning. The oven base and frame legs must rest on a firm, uniform and flat surface. No anchoring of the frame into the ground is required. After installing the appliance, adjust its horizontality, if necessary, by turning the M12 screws: first, place the air level longitudinally and then crosswise.
PAGE 3
panel. - Fuse protection of the power relay feeding circuit. - Use of H05 RN-F type rubber covered cables and wires of sections and types suitable for the supply voltage and specific working conditions. NOTE: Protection against overcurrent and differential protection must be installed by the user upstream of the appliance power intake. minutes in order to accelerate the renewal of air inside the oven and then, close the door. During this process, do not leave the oven unattended.
PAGE 4
liquid in the interior of the oven. - Do not wash the internal or external surfaces of the appliance with water. - The oven may be operated only by people trained in the use of electrical appliances and informed of the hazards resulting from an incorrect use or, in any case, of any use that is not consistent with normal operation and the instructions contained in this handbook. - Users must be familiar with the appliance and comply with the local legal age requirements to perform their job.
PAGE 5
FIG. 1 Monofásica Single phase Monophasé FIG.
PAGE 6
CARACTERISTICAS SPECIFICATIONS TERMOSTATO REGULABLE ADJUSTABLE THERMOSTAT Nº PIZZAS Nº PIZZAS POTENCIA LOADING DIMENSIONES CÁMARA (MM) DIMENSIONS CHAMBER (MM) - Ancho - Fondo MINI FP-4 FP-6 FP-4+4 FP-6+6 60-500ºC 60-500ºC 60-500ºC 60-500ºC 60-500ºC 4 de/of Ø25mm 4 de/of Ø30mm 6 de/of Ø30mm 8 de/of Ø30mm 12 de/of Ø30mm 2 x 3.000 W 4.400 W 6.600 W 2 x 4.400 W 2 x 6.
PAGE 7
UNE-EN ISO 9001 09-01/0 ER-437/1/96 SAMMIC, S.A. (Sociedad Unipersonal) C/ Atxubiaga, 14 - 20730 AZPEITIA - www.sammic.