User's Manual

Note: If “Wireless Zero Configuration” is enabled, you can only configure the advance
setting or check the link status and statistics from the configuration utility of the adapter.
1.2.1 Profile
In the “Profile”, you can view and manage the current using Available Point(s). You can
Add, Delete, Edit, or Activate the current Available Point(s). Also you can duplicate the AP or
set current AP as Default.
Profiles List: The Profiles List displays all the profiles and the relative settings of the profiles
including Profile Name, SSID, and Channel…etc.
Profile -> Name of Profile.
SSID -> AP or Ad-Hoc Name.
Channel -> Channel in use for Ad-Hoc.
Authentication -> Authentication mode.
Encryption -> Security algorithm in use.